What is a nail thermal and how to use it? Ideas for designing nails with thermal dealer, Hollywood design: fashionable directions of 2023, photo

What is a nail thermal and how to use it? Ideas for designing nails with thermal dealer, Hollywood design: fashionable directions of 2023, photo

Want an original and persistent manicure? Then the nail art using a thermal member is created for you! The main advantages of this trend manicure is that it can be done independently at home.

Every woman seeks to be beautiful and well -groomed. And not the last role in this plays original manicure. Want to look like Hollywood stars? There is nothing easier! More recently, a new trend has appeared in manicure salons - creating a manicure using a thermal girl.

This technology has already been successfully tested by celebrities, and finally it became available to absolutely all ladies. Such a coating is very easyand after using an ultraviolet lamp the manicure becomes impeccable. So let's figure out all the intricacies of this unique technology.

What is a thermal mud for nails?

The technology for applying thermal dealer or Minx Producer is very simple. Of course, in the salon it costs a lot of money, but the result will pleasantly surprise you. After all, an impeccable manicure is worth it! You can do this procedure at home, but before doing this and not to spoil the material, it will be necessary to look at the work of the master at least once.

Using the thermal puffer for manicure is a new bright trend
Using the thermal puff for manicure is a new bright trend

So what is this technology? Consider more details:

  1. To start nails are given in full order: Cleaned, the cuticle is pushed away. Nails are treated with a degreasing drug
  2. The thermole is heated Either under an ultraviolet lamp, or a hairdryer is used for this purpose. Then her put on nails And she sticks to him
  3. Excess material must be removed and again file nails

At first glance, this the procedure is quite simpleBut it will take at least half an hour on it.

Concerning thermal advantagesThey are obvious:

  1. A rich palette of shadesin which you can find about 350 colors. And this means that you can supplement any image
  2. With a thermal dealer you can forget about the need for manicure for three whole weeks
  3. Removing the thermal muffle is easy enoughat the same time you will not need any chemicals
  4. No mechanical damage to this material is not terrible
  5. The thermal soldier is hypoallergenic
  6. This nail art has become a loved one among the stars, and who, no matter how they know on the novelties of beauty and care?

Such an impressive list of advantages deserves that you at least once pamper yourself with such an impeccable manicure.

Video: NCLA thermal male. Secrets of application on gel polish

What you need to apply the thermal bar on the nails and how to apply: instructions

A few years ago, a manicure with a thermal girl was available only in the cabin. Now you can buy this material in any special storeAnd he will cost cheaper than in the cabin. So everyone can try to make such an original manicure on their own.

When dried, a thermal pound can be dim
When dried, a thermal pound can be dim

Except for the film you still you will need some devices, such as a special lamp (although some masters say that you can do with an ordinary hairdryer) and other tools.

So that's what you you will need a Minx-design:

  • Scissors for manicure
  • Wooden wand
  • Grinding saw
  • Thermal soldier
  • Nail degeneration tool
  • Special lamp or ordinary hairdryer

Another important factor without which you cannot do is patience and at least 30-40 minutes:

  1. To start take your nails in order: Remove the varnish, file your nails, polish and degrease them
  2. Next is needed cut off the required amount of thermalbut be sure to cut off with a margin
  3. Wooden stick or toothpick separate the sticker from the film. Then warm up well under a lamp or hairdryer
  4. Apply a warm film to the nail plate, straighten and slightly press it
  5. Now dry for 4 minutes under the lamp. Watch the thermal male has dried well and stuck to the nails
  6. The uneven edges should be cut scissors and file with a file
  7. To additionally protect the material cover it with fixing colorless varnish

A minimum of effort - and a magnificent manicure, which even Hollywood celebrities will envy, is ready! Impeccable nails will delight you for more than two weeks.

The design of the nails with thermal puff 2023: photo

The thermal girl looks great on both short and long nails. They can be placed only in one specific area, or you can cover the entire nail plate with material . Continuous coating It will look good on one or two nails of one hand. But small elements of thermal male can decorate each nail.

There are several types of thermal ships. One sheet can be covered with patterns or ornament from which certain areas are cut. And there are sheets that are already delimited and have areas that they resemble nail plates. The main thing is to correctly cut or choose the necessary fragments.

Apply the thermal gun need on polished and well -leveled nails. For this, first of all, the nail plate is necessary cover with a varnish. If it turns out that you cut out a smaller material than the nail, then you can fix everything with a colored varnish, which is close in tone to the color of the sticker.

The thermal dealer when heated slightly expands And increases the area. However, when she cools down, then has the property shrink.

This allows her fit tightly to the nail plate. One of the advantages of thermal puff is aligning the surface of the nail and hiding its shortcomings. After applying the heaters, the nails are necessarily necessary cover with fixing varnish.

Even if the nails have minor defects, then the thermal girl hides them well
Even if the nails have minor defects, then the thermal girl hides them well

Thanks to the huge selection of various shades, patterns and ornaments, you can make constant diversity in your manicure.

Besides, you can decorate the thermal gun various shine, pebbles and rhinestones. A manicure that combines several techniques will look very beautiful. For example, half of the nail can be painted with a gel varnish, and the rest of the heat is applied to the rest of the one.

Hollywood manicure by thermal soldier

History of creation This unusual manicure is very interesting. Once two friends, one of whom lived in Australia, and the other in America, gathered together to come up with some stunning manicure.

First of all, they sought make it durablesince one of them worked in a car repair shop. And I wanted to be beautiful even at such a "dirty" work. Technology of technical film covering has long been known. And the ladies thought: why not apply this idea for manicure.

The protective film began to gain popularity In the States. Metallic shine, golden or silver nails - is it not a real breakthrough in the beauty industry! Hollywood stars They began to demonstrate to their world with pleasure impeccable nail art.

Under the light of sofits and flashes of cameras, such an unusual manicure looked especially bright and catchy. After some time thermal male has become accessible to beauties around the world.

Unusual manicure good because it can be easily done at home.

Gathered for a party or a secular rapt? Then you can safely use golden or silver tones. They will shimmer beautifully, and attract attention. For everyday life there are more muted thermal tones. Anyway, your nails will look original and impeccable.

Video: fast nail design "Hollywood manicure"

How much does a nail thermal pill hold?

It is necessary to take into account the fact that thermal male must be applied to the base coating. Before the procedure is sure to degrease your nails and grind slightlynail plate. After the thermal soldier is well fixed on the nails, they are recommended cover on top with a fixer.

If you make the whole procedure correctly, then this the coating will stay for about 2-3 weeks. A ped -member pedicure can last much longer.

How to keep the thermolemilk for nails for a long time?

To nogots with thermal puffer pleased you for as long as possible With its impeccability and beauty, there are several restrictions that should be avoided. That's why listen to the advice And try to follow them:

  1. In the first few days after the procedure of such a manicure try not to contact hot water. If you are waiting for any hassles around the house, then ask for help from someone or postpone them for several days. So you definitely will not damage your minc manicure
  2. Sometimes it happens that the thermal girl begins to exfoliate. Do not be alarmed, this is a completely solved problem. An ordinary hairdryer grind the film slightly and press it well to the nail plate
The thermal switch on the nails of the legs will last longer
The thermal switch on the nails of the legs will last longer

if you tired of a manicure with a thermal soldier, then you will need everything a few minutes to remove it. To do this, pick up a small basin or bowl hot water And lower your fingers into it for a few minutes.

High temperature will instantly remove the thermole from the nails.

Let yourself become a real star! Try a manicure with the use of a thermole: please yourself and surprise your loved ones!

Video: a master class on applying a thermal girl



Author:
Evaluate the article

Add a comment

Your e-mail will not be published. Mandatory fields are marked *