Why is it swollen, cooked, bubbling, departing, fringing gel polish on the nails, in a lamp? What to do if the gel polish wrinkled, made it at the cuticle and side rollers?

The reasons for the appearance and methods of eliminating chips and detachment on gel polish.

When applying gel polish, many difficulties associated with thearability of the coating can occur. In this article, we will tell you why the gel polish is melting at the ends, at the cuticle, bubbles or swells, after drying in the lamp.

Why is gel polish swollen on the nails, wrinkles in a lamp?

There may be several reasons for this phenomenon.

The most main of them:

• This is insufficient degreasing. Most likely, on the nails, in the place in which the bubble appeared, there is a layer of fat, which hit when applying a hand cream, before the coating, or when the technique is not observed.
• Perhaps the surface of the nail is not entirely degreased correctly. The swollen places appear after they applied the primer, touched the nails of the lips, hair or skin on their face. From this particle of fat appeared on the nails.
• The cause of the appearance of bubbles on the nails is pigmented compositions. Typically, varnishes, which contain a lot of pigment, cannot dry in a lamp over a certain period of time. Such compositions must be applied with very thin layers, carefully listening to one by one.
• Insufficient lamp power. This usually happens with ultraviolet devices, in which light bulbs are replaced untimely. That is, if your lamps work dimly, shine poorly, then a strongly pigmented varnish can easily swell. The power of the lamp is simply not enough to dry the coating.
• The improper location of the nail in the lamp. Most often, this happens on the thumbs when all five fingers are dried at the same time. Thus, the thumb is at an angle, and at the beginning of the drying, a drop of gel polish simply rolls into the area of \u200b\u200binclination. It turns out a large accumulation of gel polish, which simply does not have time to dry. As a result of this, bloating on the nails appears.

What to do if the gel polish wrinkled?

How to rectify the situation? There is no need to completely redo the manicure. It is enough to block normal nails with a top, complete the design. And those nails on which bubbles appeared, and bloating, must be treated, remove the foci. This is best done with a cannon or file. Keep in mind that the milling cutter can be clogged with this sticky substance.

Next, it is necessary to remove the remnants of dust with a brush, wipe the nail with a degreaser. After that, gel polish is applied. There is no need to re -prepare the nail, apply primer, degreaser and base. Gel polish is immediately applied, and after drying it is blocked by a layer of top.

Why is gel polish peel off at the cuticle?

There are several reasons, they are the fault of the master and arise with the non-compliance of the technique of applying gel polish.

The reasons:

• Incomplete removal of phergy from the nails. That is, when the base finds on the phergy, it gradually increases and forms a pocket or detachment
• A little gel polish hit the cuticle. Thus cannot be avoided
• The shine was not removed with a saw or milling cutter with a nail
• The nail did not degrease or did not apply a primer. Because of this, there is no normal adhesion of the nail and artificial material, so it exfoliates

Gel-fluid isking from the ends: what to do?

The reasons:

• Chips in the end of the end appear as a result of improper processing or use of low -quality materials.
• At the ends of the chips are manifested if you have not sealed the free edge, that is, you did not miss the cut with the base, gel polish, and then with a top. At each stage, it is necessary to miss this site, that is, to seal it.
• Most often, chips, cracks at the end are formed due to low plasticity of the material and excessive soft nails. There are very soft nails on which gel polish does not last more than a week, while you can use high-quality, professional materials, observing all the rules and equipment.

Strengthening acrylic powder:

• This is due to the fact that the coating is not so plastic, and does not stay on the nails, squeezes, with it, it isking. In this case, it is necessary to make the nail more rigid. For these purposes, you can use several options. This is the strengthening of acrylic powder, acrigel or polygel.
• The fact is that the gel itself is a rather soft material and mobile. That is, it can be squeezed with the nail. Nothing will happen if the material is quite plastic. If the plasticity is low, cracks, chips appear.
• To avoid this, it is necessary to strengthen. The easiest way that is suitable for use at home is to strengthen acrylic powder. To do this, prepare the nail, make a manicure, remove phergy, cuticle, clean in the area of \u200b\u200bthe side rollers.
• After that, apply Dehydrator, primer, bonder, base. Before placing in a lamp, you need to sprinkle an unimportant base with acrylic powder without color, that is, transparent. After that, the nails are dried in a lamp, the remnants of the powder are removed with a brush and overlapped again.
• This layer of acrylic powder is a reinforcing frame that will hold the gel polish on the nails and prevent cracks and chips. Of course, the quality of materials matters, so we recommend using funds of well -known brands that have proven themselves well.

Why does the gel polish exfoliate at the base and cuticle: what to do?

It often happens that after applying gel polish, it turned out to be a beautiful manicure, which is not particularly soft. But after a couple of days he exfoliated from the base. The main reason is insufficient drying. Perhaps you could not withstand enough time or small lamp power. Therefore, when using pigmented coatings, quite dense and viscous, we recommend using a hybrid lamp with a power of 48 watts. Such an apparatus dries absolutely all gels, gel varnishes, shellacs, as well as substances that dry under UV rays.

Please note that some gel polishes dry poorly in ice lamps or vice versa, do not dry ultraviolet devices. Therefore, you should carefully read information on the package, maybe you have just come across this tool. If this happened, and when you press the nail, you feel the void inside, this means that the material has exfoliated from the base. This happened due to the fact that it was completely not dry, but only the top layer of the coating was baked.

The lower layer remained sticky and unforgived. In this case, it is necessary to soak the coating using a special tool or removed using a file or cutter. After the coating is completely removed, it will be necessary to re -restore it using the entire technology. In order to prevent detachment next time, we recommend applying the product with very thin layers and dry a longer period of time in a lamp. Only then apply the next layer.

Another reason why gel polish can leave a nail plate after a few days is the use of very hot water. After visiting the salon during the day, many masters recommend refraining from the sink of dishes, going to the bathhouse, a sauna. If the general cleaning falls the next day, after you have done a manicure, to wash, and you need to clean it in gloves so as not to create the effects of aggressive substances on the coating of gel polish. Because it is fixed on the nail within 24 hours.

Why does the gel polish exfoliate from the side rollers, what to do?

The main reason is that you have incorrectly prepared a nail plate.

The reasons for the appearance of deteriorations in the side rollers:

• The base did not fall into this area and part of the nail remained bare. Accordingly, when gel polish enters this site, it simply exfoliates.
• The base hit the cuticle, so there was a detachment, due to the growth of phergy.
• The area of \u200b\u200bthe side rollers was poorly processed during the manicure and did not remove the ptergius, so the base and gel polish fell directly on it.
• Incorrect selection of material. Please note that some manufacturers make a base and gel polish, as well as a top, especially for artificial coatings. That is, for acrylic and acrigel. This kind of coating has an excellent mirror effect, creates beautiful glare. But the coating is not very plastic, that is, hard, something similar to glass. Thus, the coating during homework, cleaning will move away from nails. After all, the nail in these areas, due to its natural softness, is deformed, bends. But the material, due to a lack of plasticity, does not move with the nail, isking from it. Therefore, select varnishes for coating correctly, and do not purchase an agent for artificial nails.
• Insufficient washed down. Perhaps in this area you did not get a file and treated poorly, did not remove the shine from the nail. In this case, there will be detachment. Therefore, in the area of \u200b\u200bthe cuticle, we recommend using a milling gun or flame, which perfectly cope with the removal of the cuticle, phergy, as well as the upper shiny layer of the nail in the area of \u200b\u200bthe side rollers. Where it is difficult enough to get a file.

To avoid detachments on the nails after applying gel polish, it is necessary to use high-quality materials, properly process the nail, and also apply the coating with thin layers. A little practice, you can make the perfect manicure without chips and detachments at home.

Video: chips on gel polish