Strengthening nails under gel polish: how to strengthen the nails with an with a by-acrylic powder, base, gel, acrylate, polygel? Why strengthen the nails under the gel polish?

Ways to strengthen nails under gel polish.

With the advent of gel polish in the field of nail service, the sock of the manicure, as well as its resistance, has significantly lasted. However, many women were faced with the problem of peeling and chips of gel polish. All this is due to the insufficient strength of the natural nail, so it is often necessary to carry out strengthening before coating gel polish. In this article, we will tell you how to strengthen the nail using various solid materials.  

Why strengthen the nails under the gel polish?

The simplest option is to strengthen the base. However, this option is not suitable for everyone. This is due to the excessive softness of the nail plate and its ability to bend in different directions. Unfortunately, most bases are quite plastic, so they bend along with a natural nail, as well as the top coating.

Which quite often leads to chips and the appearance of detachment on the ends of the nail. However, this method is perfect if the client’s nails have quite strong and thick. In this case, the fortifications using the base will be enough. This method is also suitable if it is necessary to correct some defects in the natural plate. That is, using the base you can also align.  

How to strengthen the nails of nails under the gel polish base?

Instructions:

• To carry out manipulation, it is necessary to prepare the nail plate in a standard way. To do this, a sawdust is carried out with a soft buff in order to remove the shine from a natural nail. After that, it is necessary to remove the phergy so that there are no detachments in these places.
• Next, processing is carried out using a primer, as well as a degreaser. After these manipulations, a thin rubbing layer of the base is applied. It is not necessary to dry it.
• Now you need to set a large drop of the base on the nail and with the help of a thin brush to level it, not forgetting to display the Apx line, gradually reducing the amount of material to the cuticle, side rollers and the ends of the nail. After that, it is necessary to turn the nails down in order to level the coating and place in the lamp for a few seconds, until the base is completely dry.  
• If your nails are quite strong, strong, thick, then such a fortification will contribute to a longer soreness of gel polish.

How to strengthen the nails under the gel polish acrylic powder?

In addition to this method, it is often strengthened using a base involving acrylic powder. In this case, Acryl plays the role of a kind of reinforced worker, that is, builds a kind of strong frame.  

Instructions:  

• To carry out this manipulation, the preparation of the nail plate is carried out in a standard way, a thin rubbing layer of the base is applied, which must be dried in a lamp. After that, a thick layer of the base is applied and sprinkled with acrylic powder.
• After that, the mixture is dried in a lamp, without removing the sticky layer, another leveling layer of the base is applied, which will help to hide the grains of acrylic, if they are large.
• This method is suitable for nails of medium strength, and will not save from chips of gel polish if its own nail plate is very thin, weak, laying.  

How to strengthen the nails with gel under gel polish?

You can strengthen the nail plate with the help of solid materials. They are perfect if their nails are very thin. This is the only possible option for girls who have no coating longer than a week on nails. This is due to excessive weakening, softness and subtlety of a natural nail plate.

Accordingly, there are no alternatives to strengthen with solid materials. Because such nails to strengthen the base using acrylic powder are not possible. Such a coating simply does not hold on to the nails, and is cooked in just a week. To extend the intelligence of the design to three weeks, you must use the strengthening with solid materials. That is, gel or acrigel.  

Instructions:  

• To carry out manipulation in order to strengthen the gel, it is necessary to saw the nail plate, remove the remains of the phergy using the milling cutter, and give shape to the free edge. After that, dust is removed using a napkin with a degreaser, and a primer is applied.
• For the best clutch of the coating, you can apply Bonder. And after that, a very thin layer, rubbing movements, is applied, which is dried in a lamp for 30 seconds.
• Thus, with the help of the base, we form a certain adhesive tape, which will contribute to the retention of solid material on the nails. After these manipulations, you can strengthen the gel.
• To do this, you need to take a small amount of product on the brush, work out the entire nail plate, including the cuticle area, side rollers and the free edge. Thus, you apply a kind of substrate.
• After this layer, you need to take a drop on the brush and apply to the center of the nail. Now, with the help of a thin brush, it is necessary to distribute the gel in different directions, forming the Apx zone. After you are arranged by the quality of alignment, you build the architecture of the nail, you need to place your hand in the lamp.  
• This option is suitable if you work well with the gel, it does not flow, the quality of the material completely suits you. It is very convenient to work to align the nail plate and strengthen the middle consistency with gels.
• Gel-yel is poorly suitable for these purposes, because it is thick enough, poorly aligned. It is better for them to do increasing, not alignment. For the purpose of strengthening, a regular gel is suitable for increasing the average consistency.
• If necessary, you can take transparent or camouflage. The gel the gel, the easier you will be aligned. This is due to the fact that such material is very quickly erupted on the nail plate, and after that there is no need to perform sawdust.  

How to strengthen the nails under the gel polish with acrylate?

One of the most popular ways to strengthen at the moment is the use of acrylate. With it, you can not only build up nails, but to strengthen them.  

Instructions:  

• To carry out manipulation, the surface of the nail is prepared in a standard way. That is, the old coating is removed, sawn the overgrown part, the removal of phergy, after which a layer of degreaser is applied, dust remains.
• Next, it is necessary to apply the primer layer, and after drying, smear the surface using the base. Thus, the base serves as a kind of substrate for strengthening the acrylatic. If you are strengthened with this solid material, the base must be applied with a very thin layer. There is no need to bother with alignment. Now a ball of acrylatics is laid out into the center of the nail with a spatula.
• Please note that to strengthen it you need very little, much less than for building. Your task is from the center to the side rollers, the cuticle, and the free edge is pulled out the material, so that the maximum of the product is in the center of the nail, the Apexa zone.
• Surviving the surface can be done by wetting the brush in a degree, base or top. After you will suit you, it is necessary to dry you in the lamp. If you are very well owned by this material, you have a lot of experience working with it, then it is possible that you have no need to do it. But in most cases, light grinding is carried out with buff.
• Now you can, using a cutter, a flame, or a bullet processing in the area of \u200b\u200bthe cuticle and lateral rollers, this is done in order to reduce the amount of material in this zone. Only after that can the cuticle be removed.
• It is best to do this with a cutter of a ball and additionally cut with a silicone grinder. As you can see, any of these methods is not suitable in all cases. For weaker nails, solid materials, such as gel and acrigel, and in the case of solid nails, strengthening can be performed using a rubber dense base.  

Coating with gel polish after strengthening nails: how to strengthen nails under a single-phase gel polish?

Coating gel polish is carried out in a standard way. Please note that after strengthening with acrylic and gel, and after removing particles of sawdust, there is no need to apply the base. Gel polish is perfectly on artificial material without applying the base.

Peculiarities:

• If you want to remove the small errors that remained after strengthening with acrylic or gel, you can align with the base. After that, several layers of color coating are applied, and overlapped with a top.  
• Many girls who are engaged in nails at home, and independently make themselves gel polish in order to reduce the time spent on manicure often use three-phase gel polish systems. That is, one bottle contains colored pigment, base, as well as top. That is, instead of applying several layers, you will be enough only two. However, this option is absolutely not suitable for application to weak, natural nails.
• The fact is that from almost all nails in 70% of cases, such varnish is riding within a week. That is, the wear of such a coating is less than a week. That is why it is necessary to apply the base and carry out strengthening. Non -phaisers are a good alternative for a pedicure, but very rarely suitable for creating a beautiful coating on the nails of the hands.  
• As you can see, strengthening of nails is not a mandatory procedure, but necessary if your nail plate is very thin weak, and gel polish is practically not kept on it.  

Strengthening nails at home under gel polish acrylic

Not so long ago, the strengthening of nails was performed using ordinary acrylic and monomer. However, technologies are not on the spot, and manufacturers of food products are developing. The procedure for carrying out the procedure for strengthening acrylic is quite simple.  

Instructions:  

• It is necessary to moisten the brush in the monomer, dip in the powder, and with the help of an adhesive ball, distribute the resulting mass over the nail plate. This method is now rarely used due to the fact that the monomer smells very badly, it can cause allergies.
• At the same time, the acrylic itself is poorly drunk, it is very solid, so the opil can take a decent amount of time. Therefore, polygel, acrigel, that is, hybrids, are very popular.
• They are very easy to apply, and it is easy to saw. Which takes a minimum of time in the process of strengthening nails. At the same time, if you own materials very well, you have a decent experience, then in most cases you may need a very insignificant sawdown in the area of \u200b\u200bthe cuticle and side rollers, the end. This significantly saves time for correction, strengthening nails.  

Strengthening nails before applying gel polish-the procedure is optional. But if the nails are thin, this is the only way to improve the resistance of the coating.

Video: Strengthening nails for gel polish