Learn to sew clothing for Barbie and a hi monster. The article includes ideas, patterns, tips, master classes.
Content
- How to sew a dress for Barbie doll and Monster high with your own hands for beginners: Master class
- Video: How to sew clothes for a doll monster high from a sock?
- How to sew a ballby ballbi and monster high doll dress
- Video: How to sew a dress and make a pendant for Monster High?
- How to sew a wedding dress for Barbie and Monster Hai dolls
- Video: How to sew a wedding dress for Monster High?
- How to sew a dress with sleeves for a doll Barbie and Monster Hai
- How to sew a skirt for a Barbie doll and a monster high?
- Video: How to sew a leather skirt for the Monster High doll?
- How to sew a T -shirt for Barbie and Monster High dolls? How to sew a sweater for Barbie doll and Monster High?
- How to sew pants from velvet for Barbie doll and Monster High?
- Video: jeans with spinning dolls without a pattern!
- How to sew a fur coat for the Barbie doll and Monster High? How to sew a winter jacket for Barbie doll and Monster High?
- Video: How to make a coat for dolls?
- How to sew a swimsuit for Barbie doll and Monster High?
- Video: How to make an open swimsuit for a doll?
Dolls of the doll is one of the components of the role-playing and directorial children's games. Barbie and monster Hai, beloved by the girls, are in the kit for which interchangeable clothes are very expensive. And dresses for dolls are the same type and low-quality. If you have a daughter, sooner or later you would hear from her a request to sew backgammon for her doll. The master classes from this article will help you cope with the task and please your baby.
How to sew a dress for Barbie doll and Monster high with your own hands for beginners: Master class
If you do not have a cut and sewing skills, it will be difficult for you to sew for a barbie or a hi -hig dress on a pattern. Do not expect that it will actually turn out elegant, stylish and unusual. First, try something simple, fill your hand. Later, go to sewing more complex outfits.
Important: if you want to sheathe Barbie doll, you should know its parameters. And they are as follows: growth (excluding hairstyles) - 290 cm; Breast girth - 13 cm; width over the breasts - 7.5 cm; back width - 5.5 cm; waist girth - 8 cm; hips girth - 13.0 cm; The neck of the neck is 6 cm. If you do not have the original, do not be too lazy to measure it with a centimeter ribbon, the parameters may differ slightly.
Barbie dress and monster high from sock
For example, different beautiful dresses for dolls can be sewn from ordinary children's sock! You will only need:
- children's socks
- scissors
- thread
- needle
- marker
- lace or tape
If you decide to make a doll outfit and sock, the toe itself should be new and beautiful. It is pleased that socks come from different fabrics: from a terry one you can make a Barbie a cozy winter sweater, from a thin cotton - a light summer dress.
- Lay the toe on the table, take the marker. Look at the figure how you will need to mark it.
- If you decide to make a set of T -shirts and skirts for the doll, you will need to cut an elastic band from the sock (the one on the lapel) and the mouse.
- If the toe does not pour in, you will only need to make sure that the skirt holds on a thin puppet waist. Make a few incisions in the elastic and stretch through them a lace or ribbon to get a belt.
- If the toe is spilled, you will need to process the lower edge of the skirt with a seam.
- Cut the T -shirt according to the scheme from the mouse sock. If necessary, process all sections with seams.
And according to this scheme from the sock, you can make a swimsuit or a set of underwear for dolls.
Important: if your daughter is still small, but really wants to make clothes for Barbie or a monster girl herself, offer her a simple option-a seamless dress from a toe. Just make a pair of cuts in the right places, take an elastic band for hair as a belt. The dress will turn out quite pretty, the girl will probably be satisfied with her first creation.
Barbie vintage dress
You can sew a simple barbie dress by a pattern in the figure below. Pay attention to the scale! You take the red square by 1 cm, in accordance with this, increase the entire pattern.
Prepare:
- paper
- pencil
- scissors
- bill
- portnovsky pins
- a flap of fabric
- lace
- braid
- threads
- needle
- velcro
- Cut the pattern, attach it to the wrong side of the fabric flap. Circle the details.
- Leave allowances for the seams.
- Cut the parts from the fabric.
- Take care of your skirt: turn off the lower slice and treat with a seam. Sew the lace if desired.
- Process both side cuts. Process the upper cut with a seam cross.
- Go to the handle processing. Care the neck with a double thread. Make a step.
- Fold the fabric, as shown in the figure, skid it with pins. The width of the shelf between the steps should be 3.5 cm, from the bottom - 1 cm. Sew the stacks. Remove the pins, process the steps with a zigzag.
- Process two parts of the back. Care the neck with a double thread.
- Make straps: cut the lace (de details 2 by 8 cm). Sew them along the armhole of the sleeve of the cutting and the corresponding part of the back. If you do not want lace, make straps from braid or thin satin ribbon.
- Sew the shelf and details of the back on the side sections.
- Get the bodice and skirt of the dress.
- Attach a strip of Velcro to the back side of one side of the dress and to the front side of the other side.
- Make the Velcro long enough so that the buttock of the doll is not visible. As an alternative to Velcro, you can use hooks or buttons.
- Here is such a cute vintage dress should be your doll.
Simple dress for doll monster high
IMPORTANT: Monster Hai dolls are fundamentally different from Barbie dolls. Most of them have a standard body with the following parameters: growth - 21.5 cm; The girth of the breast - 7.5 cm; Breast girth - 5.5 cm; waist girth-5-6 cm; The hips are about 10 cm. The pupa-monsters have an unnaturally big head, narrow shoulders, long arms and legs. Their waist line is not clearly indicated, the back has a complex bend. Therefore, it is very difficult to sew for them “by figure”.
Also do not forget about the monstrous-glamorous style of dolls. Choose for them flowing fabrics of saturated colors, for example, Atlas or Jacquard.
Prepare:
- a flap of fabric
- threads in color
- atlas ribbons contrasting color
- needle
- scissors
- paper
- pencil
- Without a pattern and examples, a dress for a student of a monsters school will not sing. Therefore, select the pattern that you like the most that you will “pull”.
- Cut the details of the patterns, transfer it to the fabric, not forgetting about allowances to the seams.
- Sew the details of the back to the shelf. Process the upper and lower sections.
- Also process sections on both parts of the back.
- Think about the fastener. Use Velcro, hooks or buttons as it. It will turn out very beautifully if you make a dress like a corset. Then, on top of the right and left details of the back, sew the satin ribbons. In the details, make holes, pass the ribbons through them so that the corset can be littered.
- Sew the bottom of the bodice on the back by 1 cm.
- To make a multilayer lush skirt, cut several petals from the same fabric. Fold each of them in half in length and scrap with a thread.
- Sew the petals to the fuse in random order so that the dress is like a rose.
- Put on the dress on the doll, lace the corset and let the ribbons around the doll waist. It will turn out very beautifully.
Video: How to sew clothes for a doll monster high from a sock?
How to sew a ballby ballbi and monster high doll dress
According to legend, Barbie is a girl who cannot sit at home. She is all the time involved in some events, including evening. For such, she will definitely need an appropriate outfit - a luxurious dress of noble fabric. Use Atlas!
Prepare:
- a flap of fabric
- flasping
- bead or beautiful button
- threads
- needle
- simple pencil
- ruler
- scissors
You will make a pattern yourself. All you need is to draw on paper or already directly on the fabric three rectangular parts with dimensions of 19.5 cm, 6 by 21 cm, 6.5 by 16 cm.
Start by making a skirt. Fold a large rectangle in half and cut, as shown in the photo.
Manually or on a typewriter process the sections of the part of the skirt and the middle rectangle with a zigzag.
Through the upper edge of the skirt, stretch the thread, pull it off to make a cut.
Attach the doll to the chest the middle rectangle. Cut off its edges on the back of the dolls. Directly on the doll with pins, put on the places where there will be fasteners. Spend the backs from the inside.
Sew or add the bodice to the skirt.
Sew or build the side sections of the skirt.
Sew Velcro on the back.
From a small and long rectangle, make a decorative part for the neckline, as shown in the figure.
Decorate the dress at your discretion.
Video: How to sew a dress and make a pendant for Monster High?
How to sew a wedding dress for Barbie and Monster Hai dolls
Once dressing a white wedding dress is a dream of many girls. Small, they very often play the wedding of Barbie and Ken, their dolls need solemn outfits.
You can sew a puppet wedding dress by the pattern presented above. You can also use this one.
Here is such a beauty for Barbie.
The heroine of the monster Hai is still a school student. But why not finasize and “marry them” in such beautiful dresses?
Video: How to sew a wedding dress for Monster High?
How to sew a dress with sleeves for a doll Barbie and Monster Hai
Again, from the sock, the upper part of it, you can make an unusual dress with long sleeves for Barbie or the Hai monster.
- Cut the part you need. Its length will depend on the length of the doll dress you want.
- Sovele the lines of the sleeves. Try not to lose their long. But if the sleeve turns out short, do not be discouraged, cut it under three quarters. It will also turn out very beautifully.
- Cut part of the sock on the lines intended for you. Turn the toe.
- Sew the sections of the sleeves and the dress itself with a loop seam. Process the lower section of the dress.
- Bend the neck of the dress on the front side, hire straight stitches.
How to sew a skirt for a Barbie doll and a monster high?
The Barbie doll is a slender beauty, a skirt of any style and any length will sit on her perfectly. You can use the patterns below to sew a new thing.
If the puppet skirt is your first sewing experience, do not bother with the cut.
Prepare:
- 2 flaps of fabric (19 by 10 cm, 19 by 1 cm)
- glass is linen
- threads in color
- needle
- scissors
- pencil
- lace or ribbon if desired
Fold the fabric flaps to each other face, sew, process the seam with a zigzag.
Turn up and process the lower cut of the skirt.
Sew or built the elastic to the skirt belt, retreating 1.5 cm from the upper cut. Make it so that the fabric is slightly gathering.
Turn the upper edge of the skirt so that it covers the elastic band. Get it.
Fold your skirt in half, step back from the non -eared edge of 1 cm, go it. Process the resulting seam.
For dolls - monsters you can sew a similar skirt, only multi -layer. Let the upper layer be made of dense fabric, and the lower layer is guipure, lace or from a mesh.
Video: How to sew a leather skirt for the Monster High doll?
How to sew a T -shirt for Barbie and Monster High dolls? How to sew a sweater for Barbie doll and Monster High?
Sewing T -shirts and blouses for dolls such as Barbie and dolls - monsters are most difficult. Firstly, these clothing items are not easy. Secondly, the parameters of toy fashionistas are such that it is difficult to sew the top so that he sits “in the figure”, somewhere is not small, but somewhere did not pierce. But why don't you try your hand?
Prepare:
- 2 shreds of fabric
- scissors
- threads
- needle
- pencil
- pins
If you use a pattern, transfer it to the fabric, give allowances into the seams, cut the details.
If you do not find a pattern or do not know how to customize it, just attach the doll to your flaps and circle it.
Gently cut the neck and armhole for the sleeves. Do not damage pieces of fabric remaining after cutting the armhole, they will still be needed.
Turn up and go the bottom of the T -shirt. Process the neck. Sew a T -shirt on the shoulders.
Process the remaining semicircular flaps at the lower edges, and adjust the upper to the armholes.
Sew a T -shirt on the sides, sew the sleeves.
How to sew pants from velvet for Barbie doll and Monster High?
Use the finished pattern to sew Barbie or Monster High trousers from velvet, leggings or jeans.
Important: if you want the trousers to look realistic, you will have to get up. You need a machine to make the product look neat. But in difficult accessible places you will have to work manually.
Cut the details of the front and back halves, coquet, pockets, belts, roving.
Sew the flows to the back halves of the trousers. Take the sections immediately.
If desired, make a decorative selection of pockets. If you are not lazy, it will be very beautiful. Turn their upper sections and stitch.
On the pockets of the lower and side allowances, turn and iron. After sew your pockets to the back halves of the trousers.
Fold the rear rugs of the trousers with the front side to each other, sew the seats seam and process its cut.
When working with the front halves, first, stick pockets from a burlap. Unscrew the seam from the front side. Sew the barrel to the burlap.
Adjust the front seam to the place where it goes into the fastener.
Remove the allowances for the fastener and also stitch them. Unscrew the fastener and front seam.
Fold the front sides of the front and back halves of the trousers, sew on the step of the step, process the seam. Turn the pants and select the seam in the back half.
Now sew trousers on the side seams. Process the seams. At this stage, there is the last opportunity to adjust the outfit on the figure of the doll.
Sew a belt to the trousers, and to the belt - worms.
Try the pants for the doll for the last time. Climbed? Sew the fastener, the work is over.
Video: jeans with spinning dolls without a pattern!
How to sew a fur coat for the Barbie doll and Monster High? How to sew a winter jacket for Barbie doll and Monster High?
Sewing outerwear for the doll is not easy. But if you have a piece of fur, a rally of denim or raincoat fabric, everything will work out.
For sewing a short white fur coat you will need:
- fur
- lining fabric flap
- ribbon
- velcro
- pencil or felt -tip pen
- scissors
- threads
- needle
- Choose a pattern that you like the most. Gently cut the details out of it.
- Transfer the parts to the fur, circle, add allowances to the seams, cut it out. Try to make parts with the right direction of the pile - from the top of the product to the bottom.
- Do the same on lining fabric.
- Sew the parts from the fur over the shoulder seam.
- Sew the details of the hood made of fur. Sew the hoods on the hood made of fur.
- Sew the fur sleeves to the fur four.
- Sew parts from lining fabric over the shoulder seam. To the lifing of lining fabric, weak the sleeves.
- Collect the details of the hood made of lining fabric. Sew the hoods on the hood made of lining fabric.
- Fold the hoods of fur and lining fabric face to face and sew them.
Put the parts of fur and lining fabric also face to face, sew to them the corresponding details of the hood in the neck. - Sew the fur and lining around the perimeter, do not touch the lower sections.
- Turn the fur coat, turn and process the lower sections.
- Cut the part of the belt from the tape, sew the Velcro to two ends. The fur coat will be smell, it is necessary that it holds on something.
The same pattern can be finalized to make a warm jacket for Barbie or Monster High. The lining is needed only for a hood. It will also be necessary to cut and sew the details of the pockets, put a snake into the product.
Use these ready -made patterns, you will get such wonderful Barbie jackets.
Video: How to make a coat for dolls?
How to sew a swimsuit for Barbie doll and Monster High?
A swimsuit for a doll can be sewn and separate. Make it from old swimming trunks or a flap of elastic fabric. But if this is not, any other is suitable, because, most likely, the doll will swim for a ponaroshka.
- Cut the parts of the paper swimsuit. Transfer them to the fabric, leaving allowances to the seams.
- Sew the details of the bra.
- Sew the parts of the swimming trunks on the side seam.
- If desired, sew in the strap or decorate it to the swimsuit.
Video: How to make an open swimsuit for a doll?
- DIY dolls with your own hands from fabric and threads: step-by-step instructions, master class.
- Foamiran dolls: patterns, master class.
- How to sew a beautiful textile, interior doll, big -lifetime, Waldorf with your own hands: patterns, instructions, photos, videos.
- Obel dolls - herbalist, plantain, health, cerebells, for family, angel, successor, marriage, prosperity, for pregnancy
- Obel dolls - for a child, cherry, non -memorials, for happiness, bell, for the house, a deserted
- How to make a pupa of voodoo from paper, branches, felt
- Crochet knitted Lalalupsi dolls: master class, schemes and description
- Doll amulet of a brownie with your own hands from tights, burlap, thread and cardboard
- How to make a Barbie, Tilda, Mobanka doll with your own hands?
- How to make a doll with clothes from cardboard with your own hands: schemes, stencils, photos.