How to sew a hat from a fur from fur: patterns, description of the process

We sew a hat-ear of fur: a detailed instruction for the selection of material, reveal and sew.

Content

Want to create gorgeous things from natural or eco-fur? In this article, we will tell you how to sew a hat a hat made of fur, and also share the advice of working with fur for beginners.

Patter

In order to sew a hat from the ear from the fur, it is previously necessary to design or transfer the pattern in the real size. Please note that the ear hat is sewn on free tightening so as not to squeeze the head. For example, if you have a head volume of 56 cm, the internal size of the cap of the earflaps at the base should be 56.5-57 cm. A larger hat will hang out and fly off the head.

Patter of the visor of the hat of the ear from fur

Video: Marathon by sewing. We make a pattern of hats-earflaps with fur.

We sew a hat ear from fur: material for a hat

In order to sew a hat from the ear from fur, you will need not only fur, but also other materials:

Fur. The most beautiful and luxurious part will go to the visor;
Material for Tula: leather, suede, raincoat, knitwear, etc. For the most daring ones - you can perform tula from the same fur as a visor with ears;
Insulation: synthetic winterizer, vatin, etc.;
Lining fabric (choose high -quality, ideally silk);
If the "ears" are with pompons - a lace for them;
If you want the “ears” to be fixed on the occipital part - button or button;
At will, accessories on the visor.

How to sew a hat with a ear of your own hands: cut

Now we go to the pattern that was brought above. Transfer, or construct the pattern yourself, but be sure to prepare it to the full size. Do not forget that proportionality is observed in the finished pattern. If you build a pattern on your own, compare with the finished and proven scheme.

About cutting fur. To work, we will need a detail of the visor No. 3 (in the figure). Look at the fur, put it so that the pile looks up the visor (line line from the base to the top). On the pulp with a pen or felt -tip pen, circle the pattern, and then add another circuit around the perimeter (+0.5 cm edges). What is the internal circuit for? It will be easier to sew on it, especially if the seam is manual.

The contour on the pulp can be applied with a pen or felt -tip pen

It is easiest to cut the fur and skin with a blade or a sharp stationery knife. In order not to damage the fur, it is recommended to cut with small movements along the pulp, holding the fur on weight. More detailed, in the video below.

Video: How to cut natural fur and not spoil? Cut the fur on thin strips

Next, go to the cutting of "ears". In our pattern, the "ears" go in a single whole with a nasal. We cut the fur in detail No. 5. At the same time, we do not forget that in the “ears” the line of the direction of the fur goes from the base to the bottom of the “ears”. If you are sewing from scraps of fur, then you can find the “ears” from whole material, and the Nazytnik from the other. Only two mirror parts (for cutting the second part, turn the pattern so to speak, then you definitely will not get confused).

This is what a cut fur looks like. Pay attention to the edge with a magnificent, intact pile

After working with fur, we move on to a simpler work - I will cut out the lining and insulation:

Part No. 1 - We cut 4 parts from the insulation, and the same from the lining fabric. You can take a fastened insulated lining and simplify this stage. Do not forget to add 0.5 cm in the perimeter to the pattern, otherwise the finished product will be less in a volume of 1 cm on each seam.
Part No. 6 - We cut out 2 parts from the insulation.
Part No. 4 - We cut out the 1st part from the insulation (if the fur is soft and the pulp does not hold the shape - you can several layers of insulation, for density).
And we continue to cut the upper part of the cap of the cap. If the material is with a pattern - make sure that it matches.
Part No. 4 - We cut out 1 part from the material.
Part No. 2 - We cut out 4 parts from the material.
Part No. 6 - We cut out 2 parts from the material.

How to sew a hat from a fur from fur: step -by -step instructions

On the question of how to sew a hat from a fur from a fur - the assembly is an important point, which is important to perform correctly.

If you plan to sew manually, we recommend watching a video about a fussy manual seam.

Video: Hand Skinny Seam.

We sew all four parts of the insulation part No. 1;
We sew all four parts of the lining part No. 1But in one of the seams, leave the “window” 10 cm. Later, we will turn the hat through it. It is important that the seam is grabbed from above and below, so it will be as neat as possible;
The hand is already stuffed, and sewing four parts of the top of the tula parts No. 1 will not be a problem;

We sew a visor from a lining, a heater-seal and fur. In the process of sewing carefully with a needle or knitting needle, lay out the fur from the edge to the middle. The base of the visor is not sewn. The fur part is slightly larger, when stitching, you slightly pick up so that the visor is more voluminous. After turn the visor and walk around the seam with a needle, prying and taking out the pile, which hit the wrong side;
You can sew fur on a typewriter. If the pulp is thin-with a regular needle No. 75-100. If the skin is dense - choose a three -pointed needle for the skin and seize in slow modes;

Now sew the "ears" with the Nazatylnik - fur with the material of the top of the cap of ears. The side that is sewn to the tulle is not sewn. And again the fur is slightly prepared;
Sew part of the Nazatytnik among themselves: external and internal part;
The next step is to sew the material of the “ears” and the Nazatylnik with the material of the Tula;
Sew the fabric part of the visor to the upper layer of the tula;
Sew the fur part of the visor to the lining;
If you plan to put buttons or buttons - do it now;
We turn the hat and sew it from the wrong side around the perimeter of the base (you will have the last seam);
Through the hole left in the lining, we turn the hat (if it is difficult due to thick skin-you can slightly tear out the seam) and sew a manual secret seam (below in the video).

Video: Learning to make a secret seam manually

Comb the fur and try on! If required, pull on the blank and give time to take shape. You can walk through the fabric, especially in places of seams. But so, in order not to touch the fur (he can fade).

Learn to work with fur? You will be interested in our articles:

How to sew a hat ear from fur: reviews

Reviews about sewing hats ears:

Victoria: I saw a rabbit skin and caught fire to sew a hat-earflap. The upper part - connected, now the peak of fashion! I cut the remaining parts. It is important not to rush with fur, I was mistaken once, and I had to redo it. But there was enough clock, I would have to buy on an adult hat. Apart from knitting, she sewed in two hours.

Marina: cheap and good quality material for my alterations I find in a second hand. Recently I came across a leather jacket with a giant fur collar. She worked with Meh for the first time, and was afraid that there was no special equipment. But everything turned out to be quite simple. Several series of the series and I am the owner of a fashionable hat that I will wear with a down jacket.