How to sew a robe with a smell with your own hands with a pattern and without a pattern to different sizes: detailed instructions, photos, videos

How to get out of the bath and put on a warm home bathrobe. What to do if a quality product costs a lot of money, and there is no way to purchase it?

Content

How to sew a robe with your own hands without a pattern with a smell?
How to sew a bathrobe with a smell: pattern
How to sew a bathrobe with a smell: examples of patterns
A collection of video for sewing robes with a smell with a pattern, without a pattern: how to sew a dressing gown with a smell and a rusty collar, bath, knitwear, silk, classic, kimono quickly?

The optimal output is to sew a robe at home. From this article you will learn how to sew a home dressing gown with a smell with a pattern and without it.

How to sew a robe with your own hands without a pattern with a smell?

It is very convenient to wear a bathrobe with a smell, because it is not required to additionally sew buttons or lightning. In addition, accessories can break and come off, which will lead to constant repairs. This can cause you significant discomfort.
The best material for a home dressing gown with a smell is knitwear. If you use the chintz, then he will fill you. This option is suitable only for miniature women.

The optimal amount of material

If you are going to sew a bathrobe with a smell of about 150 cm wide, then its length should be equal to the width. If the width of the robe is about 90 cm, then it is better to increase the length by 2 times.
A housebuilder with a smell can be sewn with a universal size (from 42 to 46). If you wear the size of 50-54, you will need to slightly increase the width of the product.

How to cut a bathrobe correctly?

If you have chosen a narrow fabric, then you need to fold it in half in the cross section. The wrong side should be inside. If the use of wide fabric is implied, then it must be folded in half along. The wrong side should be inside.
The number of seams also depends on the size of the fabric. When using wide fabric, you can make a minimum number of seams - only on the shoulder part. Narrow fabric implies the implementation of a straight seam on the back. To do this, you should retreat from the left edge of the fabric about 2 cm, and draw the future suture line.

The line of the neck

From the back (on the left side) from the upper part you need to retreat 1.5 cm to make a seam. After you need to measure another 2 cm, and note the depth of the neck.
From above from left to right it is necessary to note 10 cm. It will be the width of the neck. The marked points must be interconnected.

The width of the product

It is important to sew a robe with your own hands quickly, you need to correctly determine the width of the product so that it does not constrain movements.
In addition, wide products preserve heat better, so this is the perfect option for the cold season. To determine the width of the bathrobe, you should measure the volume of the hips, divide the value by 2, and add 20 cm to the resulting number. That is, if the volume of your hips is 100, then the width of the bathrobe should be 70: (100/2+20).
Measure the width of the product from left to right. If it is planned to sew large sizes (48-54), then it is better to make a small stock.

Cutout lines on shelves

On the right side from top to bottom you need to lay 1.5 cm to form a seam. Measure the length from the shoulder to the waist. From left to right (from the upper part) it is necessary to measure the width of the neck.
The points that turned out in the process of measurements must be connected smooth line. To facilitate this process, use the pattern.

How to calculate the line of armhole and bottom?

Determine the center of the fabric and measure the width of the armhole from top to bottom. To do this, you need to allocate about 2 cm on the seam, and add 24 cm to the value. Cut the material along the indicated line.
If you initially correctly determined the length of the bathrobe, then the bottom line is not required. In the case of using a large tissue roll, measure the optimal length that will correspond to your growth. Draw a straight line and cut the product along the marked lines.
To make it more convenient to use a bathrobe, you can make from the remnants of the fabric belt. It is better if it is 2-5 cm wide. Such belts are more practical and durable.

Next, you need to sit out the shoulder seams and you can try on the product. You can decorate the edges of the dressing gown with both a oblique fiber and ruffles.

How to sew a bathrobe with a smell: pattern

Before proceeding with the pattern, decide on the fabric. For the warm season, it is better to use smooth and light materials that will not stick to the body. It is best to use silk.
If you have never encountered sewing a dressing gown, and for the first time experience your strength, then it is better to refuse silk. Only experienced seamstresses can work with it. Stop your choice on cotton, which is quite easy to use.
For cold season, give preference to warm materials. Remember that it is difficult to sew such fabrics with your hands. To work, you will need a sewing machine.

Step -by -step instructions of the pattern:

First you need to cut out the back. Put the point A on the fabric, which will be the first peak. After measure the volume of the hips, add 6 cm to this value, and share the resulting value in half.
Measure from point and this value (in the side), and mark it with point B. Daling from the first peak should be measured the same line, put points C and D. You should get a complete rectangle.
Draw from a point 4 cm down and make a shoulder line. Place the NK line. The back pattern will be carried out through the points of the AVSDK.
Next is carried out Spear pattern. From point B, it is necessary to draw a horizontal line, which should be equal to the length of AB, or part of it. It all depends on your preferences. From point D, draw a line equal to half the length of AB. What is this point U. Complete the rectangle, marking the point O. Increase the shoulder line until the segment intersect with the dime point. Put a point of g.
Pattern of the transmit. From point A draw a line equal to the length of the VD. Put the point R. to the left draw a horizontal line equal to the length AB. Put the point of the J. from the segment AB retreat 8 cm, and mark the point M. Make the line of the front -type lifting line. Connect points M and R. Return 4 cm from it. The robe shelf is ready.
Pattern of the collar. Measure the length of the segments of EV and SI. Connect the values \u200b\u200bto obtain the total value. Measure the resulting horizontal length, and put points A and B. Draw such lines: AB - 15 cm, BG - 20 cm, GD - 9 cm.

How to transfer the measurement to the material?

Step -by -step instructions that allows you to transfer the measurements to the fabric:

Fold the fabric in half, and make a fold that will be the central part of the back.
From the bend you need to postpone half the length of the maximum segment, and make allowances of 7-8 cm. Ride the line in parallel to the bend to form the center of the shelf.
In the upper part, draw the shoulder line. Make cutouts for the neck. Its optimal depth is 5 cm, and the width is 8 cm.
From the formed cut out, make the shoulder 10 cm, and a bevel of 2 cm.
Rush the line from the back to the waist.
The waist line is best done by 10 cm, and divide the drawing width in half.

How to increase the pattern?

If you need to make a pattern of robe with a smell more, adhere to such recommendations:

Make horizontal lines in front, behind and sleeve. In the chest area you need to make vertical lines.
Cut the material on the marked lines.
Add 10 mm to each part, and the side elements should be increased by 5 mm.
Circle new lines and cut them.

If necessary, you can make the pattern even more. It all depends on your size of clothing.

The correct sewing of the dressing gown

Step -by -step instructions for sewing a dressing gown:

Form strands along the contours of the pattern, on the central part of the thigh, and along the contours of the entrance to the pocket. In the central part of the back, you need to make gaskets.
Save the upper and lower elements of the front part along the entrance contour into the pockets. With outer parts, sew the side and central detail of the gear of the bathrobe so that the points are on the same level.
Sew shoulder and waist Tucks on the back.
Sew the different slices of the collar.
Sew side Slices.
Summarize the selection after trying on.
Sew your pocket. The upper and lower part should be marked along the contour of entering the pocket. To process the lower cut, attach the outer sides of the sharpeners to each other. Send cuts and make a 1-cm seam.
Put out the strap to the inside, make the edging seam below, and reward the site. Put a separate line 2 cm from the place of the bend of the element. Sew the upper and lower side parts of the dressing gown in the area of \u200b\u200bentering the pocket.
Combine the middle part of the drawing with the side, and stitch them. Make a note of the cut, and walk along it with an iron. By the relief, form a seam of the finish.
Sew and sweep all the cuts. Process the collar and edges of the product.
Make the sleeves with a stool, and sew them in the armhole.
Get the hem of the product. If you wish, attach buttons or stop on the option with your belt.

So you can get a warm robe with comfortable pockets

How to sew a bathrobe with a smell: examples of patterns

Realizing the process of sewing a dressing gown with a smell, you will want to diversify your home wardrobe or please loved ones. That is why we offer you patterns of robes with the smell that will be useful to you to create elements of home clothing.

As you can see, to sew a bathrobe with a smell, it is not necessary to take sewing courses. It is enough to prepare the necessary tools and fabric. If you adhere to the above instructions, then making a comfortable robe will not be difficult. The process will take only a few hours.

For lovers of needlework and making crafts with our own hands, we have prepared interesting articles: