How to make a volume card for the New Year?

Volumetric New Year cards: with snowflakes, Christmas trees, toys and fabulous houses.

How to make a volume card for the New Year? You can make a beautiful card not only from paper. Shiny sequins, soft foamiran, transparent film, ribbons and pieces of a beautiful rope may come in handy. In our selection, you will find a video of how to make a postcard for the New Year and master classes on creating the most beautiful New Year's cards.

How to make a volume card for the New Year with a Christmas tree?

Foamiran, From which flowers are made - excellent material and in order to make a volumetric postcard for the New Year with your own hands. For a convex Christmas tree, you will need only one sheet of green foamiran. You still need a gun with hot glue or sticky transparent glue, like glue the moment is a crystal, because it is difficult to glue foamiran.

This postcard for the New Year is made completely from Foamiran, it has a soft and pleasant cover cover. Although cardboard can also be taken as the basis. For postcards from our master class, the following materials will be needed:

• A sheet of green foamiran to make a volumetric card with a Christmas tree.
• On a sheet of blue and white fuaminar to depict heaven and snow. Blue material will be the basis of the entire composition and the cover of the postcard.
• A piece of brown material for the tree trunk.
• Ready -made shiny snowflakes as a decoration.
• Glue gun.

Making a volume card for the New Year with a Christmas tree is simple. Take a sheet of green foamiran, and cutting off anything, fold it with the "accordion" on the long side. So that your "accordion" turns out to be flat, first fold the sheet in half, then fold it fourfold, and only after that make small bends. In total, eight bends on each side should turn out.

Now you need to take sharp scissors and cut the folded strip of Foamiran into 7 parts. These parts will be tiers of branches for our Christmas tree. And the length of these strips should be different. The widest piece of Foamiran needs to be placed below, and the narrowest in the very top. If you are a little mistake, cutting foamiran - it's okay. You can sort pieces of material from more to smaller when they are already cut.

Make a cover for the New Year card with your own hands. Take a sheet of blue foamiran and leave it as it is. On a sheet of white foamiran, draw a wave in the middle. It will be snowdrifts. Cut the sheet along this line and glue white snow to the blue sheet.

Now you need to fold the future card in half as it will open. Put the fold line with your fingers. On the one hand, apply glue strips from it. And then glue all 7 tiers of the Christmas tree to one half of the postcard.

To make a volumetric card, you need to apply glue to those parts of the Christmas tree that were at the top. And then fold the postcard in half and iron the parts of the Christmas tree and covers that are glued.

It remains only to decorate the Christmas tree with an asterisk, snowflakes or any other jewelry, on which you have enough materials and imagination. And about how to arrange a cover for a volume postcard for the New Year we will tell you below.

Christmas ball for voluminous postcards for the new year

To make such a volumetric card for the New Year with a ball is simple. The technique of creating volumetric balls is familiar to many since childhood. And to make the work beautiful, use good needlework materials. Suitable paper for decoupage with New Year's themes, or bright paper for New Year's gifts. The main thing is that it is bright and different.

Take a round item, for example, a glass. Circle it with a felt -tip pen on paper and thus make a lot of circles from multi -colored paper. In our example, there were 8 of them so that the cover for a voluminous postcard for the New Year turned out to be attractive.

Glue the strip in the middle of each circle. To determine the place for this strip, fold each circle in half and puff the fold line. Try to ensure that a strip of glue is thin. You can draw a thread for the ball with a felt -tip pen, and choose the same decorations for the cover the same as inside the postcard.

Volumetric postcard for the New Year with a Christmas tree from a film

Such a volumetric postcard for the New Year will turn out to be rustling, brilliant and festive. She will fit well into the magical New Year atmosphere. It is better to start making a volumetric card with a toy from the end. Namely, with a decorative rim for the ball. Try to find a round ring of a suitable size in your house, which can be covered with threads. Perhaps it will be a ringed for a baguette with curtains or some kind of goal from a box of tools. Those who have nothing suitable, we recommend cutting a ring from dense cardboard.

First, take a sheet of cardboard or foamiran and fold it in half. Draw a pencil and carefully cut a round hole for the future Christmas toy.

The film that will hold sequins can be taken from the cover for a notebook. A thin film for greenhouses, which is sold in the markets with oilcloths for the table, is also suitable. It should be polyethylene, not cellophane, the material should be slightly stretched. Cellophanes simply cannot be soldered without receiving holes.

Cut two circles from the film a little more in diameter than your future toy. Then you can go in two ways:

1. Take a super glue and apply a thin strip on the outer edge of the circle. Super glue enches two pieces of polyethylene among themselves. Do not forget to leave a hole to fall asleep there brilliant sequins.
2. The second option is to solder polyethylene with an iron. But you need to do this only through paper. Otherwise, the film will melt and stick to the sole of the iron. Keep in mind that pieces of paper will remain in places of connection. However, if you make a volumetric postcard, they will not be seen correctly.

Pour the sequins into the film and seal the edge. Attach the Christmas tree toy to the back of the postcard with a glue gun or super glue. To make a beautiful background for sequins and hide polyethylene from the inside, use a piece of packaging paper. Glue the first half of the postcard turn.

Glue the rifle for the Christmas toy. Make a loop from a piece of satin tape for her and also put it on glue. Read more about how to create a volume postcard for the New Year watch in the next video.

Video: Ideas for New Year's Cards

House for voluminous postcards for the new year

In this master class, the author created a whole house, with the real, decor elements, furniture and snow. We suggest you pay attention to its individual parts, which you can use for a volume postcard for the New Year.

We offer to arrange a volumetric card for the New Year as in the next photo. And decorative elements can be created with your own hands. For this, a wavy layer of cardboard (it will be a slate), lace (they will become carved wooden frames) and many other unexpected materials for crafts will come in handy.

How to make artificial snow?

Everyone knows that it is possible to make artificial snow from cotton wool or foam. But the author of this master class was able to make the snow look as if real. To achieve the same result, take these steps:

1. First, take the foam pieces and crush the pieces with your hands to make snowdrifts.
2. Torn the cotton wool almost transparent pieces. Apply PVA glue to the foam and glue cotton wool to it.
3. Prepare a special composition from pVA glue, white acrylic paint and semolina. Apply this composition to cotton wool. Press slightly with a brush so that the contours of foam snowdrifts are visible.

Carved shutters from lace

On old houses, you can often see lace flowers and curls carved by masters made of wood. Repeating such small beautiful details on a volumetric postcard for the New Year yourself will be difficult. But you can use lace for this purpose. Cut the elements of the lace you like with scissors. Glue them with PVA glue. Do not forget to smear them with glue and on top so that they hold well. Do not be afraid that cut lace will quickly bloom, it is quite expensive, but also quite high -quality textiles.

To make the circular elements durable, use precisely strips of wicker lace. The curtains with the base from the organza and embroidery are not suitable - such a fabric will quickly bloom.

Wooden elements from a real tree

A tree that is well suited for a volumetric postcard for the New Year is called balsa. It has very light wood, so it is used, for example, to create models of ships. And the balm is suitable for crafts. Such a tree is sold in the form of small rails and a tiny beam, from which it is convenient to construct.

To reliably attach wooden elements, you need to use a gun with hot glue.

For doors in the next photo, a piece of cardboard was used, as the basis to which wooden miniature boards were glued. Metal elements are also made of real metal, they are cut out of a tin can and bent using needlework tools.

• To imitate bricks, use egg packaging. Cut bricks out of it, glue them to a cardboard base. And then paint with acrylic paints.
• You can make convex concrete elements from ordinary cardboard. Cut them, glue and paint them with paints. Their volume will be noticeable.

Video: DIY Winter House

How to make a volume card for the New Year: Ideas

You can make a simple volume card for the New Year with a snowflake. Cut the beautiful snowflake cut it in half and glue the halves to the top and bottom of the postcard. Before doing this, sign a postcard inside.

Snowflakes inside the postcard will be able to surprise the recipient. Especially if there are a lot of them, and they seem to sleep from the postcard when you open it.

Fetr is warm material. It seems that it is more suitable for creating warm applications with toys, animals and houses. But the New Year is also a warm home holiday. See how cute volumetric cards for the New Year from felt may look.

A character on a postcard can be an animal - a symbol of the coming year. But you can choose as the main characters and snowmen or deer, as in the next photo.

Quilling is a technique in which flowers usually create. However, snowflakes created from twisted paper tubes also look very openwork and elegant. The compositions of the composition will be able to give glued beads or beads.

With such volumetric snowflakes, Christmas trees and bells you can decorate not only a volumetric card, but also the interior.

A garland of funny snowmen is another way to make a voluminous New Year card. Instead of snowmen in the garland, there may be Christmas trees, Christmas toys or people who dance in a round dance around the Christmas tree. You can make a volume postcard for the New Year and telling the family story about the life of snowmen, hares and other characters.

A voluminous postcard can be made with its foundation "accordion". After that, you need to give each bend its texture. You can add snowdrifts, trees and characters.

On our site there are many other interesting articles about crafts for the New Year:

• Sultanchiki for children on a matinee for the New Year.
• DIY garlands for the New Year.
• Simple New Year's cards with your own hands.
• Toys on a Christmas tree of cones, bulbs, cardboard.

Video: Postcard with a Christmas tree from paper