How to make a New Year's decorative rabbit of paper for beginners: step -by -step instructions, videos, ideas

Make a paper rabbit is simple and fast. The main thing is to follow the instructions.

Content

Paper crafts are the best decoration of the house. Firstly, no one can repeat the decor that you personally did. Secondly, Origami are memories of the holiday, about how they did craft, they will warm the soul all their lives. On the eve of the year Blue water rabbit, a great option will be the craft of the owner of the year.

Read on our website another article on the topic: "New Year's crafts on the wall". You will find ideas for children.

From this article you will learn how to make crafts of paper rabbit. She will perfectly decorate the interior and her child can take to school if he has such a homework. So, start, read on.

Crafts - New Year's decorative rabbit with your own hands from paper: step -by -step instructions

Your baby will do such a craft with pleasure on his own, but, of course, if you help. Also, such boxes can not only be taken to kindergarten or school, but they will also help decorate the interior. So, we proceed - we make a New Year's decorative rabbit with our own hands from paper. Here is a step -by -step instruction:

We will need:

Scissors
2 sheets of cardboard A4 (in color, what you want to make a rabbit)
White list
Glue stick
Black felt -tip pen
Colored paper
Ruler
The rope

We need to make such a blank:

Put colored cardboard vertically. With a simple pencil, along the ruler, draw a square 7*7 on top with retreats 1 cm. Next are two squares on the sides of the sheet, and the same - perpendicular to the upper with the same retreats. This is the "body" of the future rabbit.
On another sheet of cardboard, draw the same square. Inside it, mix two ovals that decrease to the bottom - these are the ears of the rabbit. On a white sheet, draw the same two ovals only half as much.
Cut first a layout for the “body” of the rabbit, then its ears. The upper part with retreats is a muzzle. Draw your eyes, mustache and nose with a black marker. If desired, for beauty you can add colored paper from below - the gate of the future crafts.
Glue smaller, white on colored ovals. Put your ears to the muzzle of the rabbit.
Next, the layout must be bent along the intended lines so that the cardboard bent correctly, it is better to first be closed with a hard object. This is called Bigovka. For this, a ruler or an ending ballpoint pen is suitable. Substant the intended lines on the cardboard with the tool.
Then collect the cardboard as follows: bend the muzzle upstairs, like all other sides. Slick with the side sides.

That's all - the box in the form of a rabbit is ready. Put sweets in it and under the Christmas tree. If desired, you can make 4 holes on top of each side, for a rope. Cut the long rope into several small ones. Put and fix it in the holes, then tie everything into one knot. Divide 4 ropes into pairs and tie around a spruce twig.

See also the layouts that will also help make pretty boxes:

Crafts - Easter rabbit with your own hands from paper: step -by -step instructions

Craft - Easter rabbit with your own hands from paper

One of the great religious holidays is Easter. Painted eggs, Easter cakes, sweets. The symbol of Easter is also a rabbit. So, we decorate the table for the celebration using a stand for Easter eggs in the form of rabbits. It is easy to make this craft, just follow the instructions. Such a rabbit can be used for the New Year, as a decoration of the interior or table. You can put sweets, tangerines and other sweets or fruits in the stand. Here's how to fold the Easter rabbit with your own hands from paper:

We will need:

2 sheets of colored paper

The craft consists of two parts - a rabbit and a stand.

Let's start with the rabbit:

Cut two identical squares. Next, we bend the sheet in the form of an inverted triangle.
Next, bend the corners of the triangle to the end. We turn the workpiece and bend the corners down.
Then we bend the small corner up. We turn the craft.
With the help of scissors, we bend alternately the upper corners in half.
We bend one layer of the lower corner up. Turn the workpiece and draw eyes, nose and mustache.

Stand:

We take the second square, put it in the form of a rhombus. We bend four corners to the center.
Bend the upper corner to the center, then its opposite. Fold the figure in half.
Insert one lower corner into the other, making a cylindrical shape.
We extend into the original state and insert into the upper part of the rabbit.
We insert one lower corner of the stand into another, for reliability you can glue.

Ready. See how cute such an interior decoration looks.

How to make a rabbit of origami paper for beginners: instructions, video

So, we will make one of the varieties of origami - a jumping rabbit. Such a paper craft will delight your baby and everyone to whom he will show it - friends in a d/garden, school or teachers. Great for beginners. Therefore, do not worry that you will not succeed. You will make it quickly and easy. Here's the instruction:

We will need: a square from a sheet of paper of any size, for example, 20*20 cm.

Do this:

We put a square from a sheet of paper vertically. To outline the lines, bend and extend it in half vertically.
We bend the two rectangles and extend in half, it turned out 4 small rectangles.
Now we bend the sheet horizontally. We bend the smaller rectangles to the center. On the left side, fold the corners and bend again.
Fold the structure in half. We extend the sharp corner of the figure and bend the upper parts similar to triangles.
It turned out the ears of the rabbit, bend next to them in the form of a triangle to the side. We fold the end in the form of a rectangle down.
We bend the rectangle in half and bend the end.
We draw the eyes, nose, mustache, mouth with colored felt -tip pens - all that is needed.

Another option for a smaller rabbit:

You will need: a small square of paper - 10*10 cm

Do this:

A small square of paper is needed in order to make a mini-red. We bend the square into the accordion, that is, on several medium rectangles.
We turn the structure vertically, after bending the right side of the rectangle. We bend the figure in half.
On the left side we bend the corners to the center. We make a cut with scissors, no more than 3 cm, and bend the future ears to the top.
It turns out a figure resembling a trapezoid. We bend the left side corners to the center.
We bend the left corner to the center. We turn the figure with the resulting triangle. Raise up the ears and bend them for volume.
Turn the back, then bend it inside.

We draw on the face of the bunny, everything that should be there. Look clearly in the video how to do such a craft:

Video: Origami jumping bunny of paper

How to make a mask of a rabbit made of paper A4 is easy?

As for a holiday and without a small masquerade? 2023 - the year of the blue water rabbit. You definitely will not find such a mask from anyone. She has an interesting design, and it is done quickly and easily. So, how to make a mask of rabbit from A4 paper? In honor of the owner of the year, we will make an interesting craft for the festival.

We will need:

Vata
A4 or cardboard paper sheet
Glue
Rubber thread
Simple pencil

Do this:

With a simple pencil on cardboard we draw hare ears and a mask on the eyes. Cut. We cut holes in place of the eyes.
From pink paper we cut out smaller ovals for the ears. They glued them to the mask. We glue the entire mask with cotton, except for pink sites. From black paper we make a mustache and glue them to the muzzle.
On the sides we glue the thread and the mask can be used. Ready.

Here's an even more interesting option for a mask of paper strips:

You will need: a sheet of paper equal to the head of the head, 30 cm high and glue

Do this:

Divide the sheet into many, be sure to an even number, stripes, leaving 3 cm below.
Next, cut the strips and alternate: we do not touch one, we tear off the other. The lower unreasonable part is the frame of our mask, which is worn on the head.
We glue the ends of the frame, and bend the strips inside, intertwining them with each other.
Glue from the bottom to the round frame.

After the mask dries, add everything that is necessary to it: eyes, nose, mouth, mustache, drawing them or making them with fabric. Do not be afraid - show imagination.

How to make a New Year's rabbit from paper: step -by -step instructions

We make a New Year's rabbit talisman from paper

An excellent talisman will be the symbol of the New Year from paper, that is, a rabbit. Make it just from paper. Here is a step -by -step instructions for making a New Year's rabbit:

You will need: the square of the A4 sheet and colored felt -tip pens.

Scheme for the talisman of the New Year's rabbit

Put a sheet in the shape of a rhombus.
We bend in half, it turns out a triangle.
Raise the lower part up.
Fold in half and turn over. We bend the lower corner.
From the back side of the craft, we bend the upper corner.
We draw a muzzle with colored felt -tip pens.
Such a craft will be able to decorate the table all year round, recalling a fun holiday.

Another interesting version of the talisman: a rabbit using the Hofro technique. Here's the instruction:

You will need:

Cardboard
Thin white paper
Color felt -tip pens

Do this:

We bend the vertically laid into one rectangular. Then fold the rectangle with an accordion in a square.
We turn the future body of the rabbit with the corners forward.
We cut out a circle from cardboard - the head of the rabbit, 4 ovals for the legs and
4 oval details for the ears (one half as much as the other).
On a circle by felt -tip pens, draw a muzzle, and black lines on the legs. We glue smaller ovals to large.
Glue the ears and paws to the body of the rabbit.

Here are another options for corrugated-bunches-see how sweet they are:

How to make a rabbit from paper: ideas, video

Now you know how to make a rabbit from paper. Above, we published many different instructions that will help make original bunnies. If you have not yet decided which one to choose for crafts, look at the options below. You will find different ideas and videos: