The craft is a star made of threads and PVA glue on a Christmas tree with your own hands: Instructions. New Year's ideas, pattern of the Bethlehem star from threads

Making a New Year's star made of threads and glue is simple. Detailed instructions are in this article.

Preparation for the New Year is already in full swing. But you do not need to buy expensive glass balls and other jewelry for the apartment, since the decor can be done yourself.

Make an air star from a regular knitting yarn. Any bright colors are suitable: red, snow-white, pale pink, saturated blue, green and so on. You will find a master class on creating such a jewelry below.

Crafts - a star made of threads and glue PVA on a Christmas tree with your own hands: Instructions

Make a sprocket of threads and glue is simple. You will spend no more than half an hour on such a craft, and it will delight you during all the New Year holidays. Prepare the following materials:

• Acrylic yarn for knitting, jute or twine
• PVA glue
• A bowl that you do not use for food
• Water in small quantities
• A piece of foam (suitable for chicken or confectionery products)
• Toothpicks, matches and other similar products
• Sheet A4, pencil and scissors

We proceed to the manufacture of a star. Here is a step -by -step instruction:

1. In a prepared bowl, dilute the glue with water in a ratio of 1: 1. If your glue was stored at home and thickened, then pour a little more water.
2. Lower the yarn into a bowl with an adhesive base and press with your hand so that the threads are well saturated.
3. Now make a star template out of paper. It can be drawn by hand and cut with scissors along the edge.
4. Then put a template on a piece of foam, and stick the toothpicks at the corners of the star. They will hold the thread. After that, remove the template.
5. Tie a knot with a loop at the end of the yarn so that the star can then be hung on a Christmas tree.
6. Lower the resulting loop from a piece of foam so that it remains as it were, and begin to pull the thread around the contour from the toothpicks, as shown in the figure below.

Advice: If you have not found polystyrene, a piece of any plywood and small cloves is suitable. According to the template, instead of matches or toothpicks, fasten the nails and begin to wind the threads.

Then do the following:

• Create a pattern inside a star with soaked threads. Do not be afraid to fantasize, in any case it will turn out beautifully and interestingly.
• Do not remove toothpicks until the threads are completely dry.
• If you need the craft to be ready as quickly as possible, dry it with a hair dryer or place a blank next to the battery.

You can coat the star with glue and sprinkle with sparkles or glue another decor. According to the same instructions, you can make other crafts of thread and glue: a Christmas tree, animals, balls, bows and so on. As a result, you will have the opportunity to decorate a forest beauty or room in a single designer style.

New Year's ideas, pattern of the Bethlehem star from threads

See which chic star can be made of ordinary yarn and PVA glue. Here are the stars:

Just print the drawings on the sheet of the desired format, cut it off - the template is ready. Now look at what we offer the ideas of decor and patterns of the Bethlehem star:

Place the toothpicks on the foam in a different way, and you will get such a work of art.

The stir from twine is original and stylish.

For the manufacture of these stars, threads of the x/b and sewing pins were used. Just wrap the threads, and then decorate the resulting product with pins.

Here's how you can pull the threads and what will come of it in the end. In this case, you don’t even need to make a template, just arrange the toothpicks on the foam in the necessary way and wrap the yarn.

You will see a more detailed description of the master class in the video below. Just repeat the craftswoman and after a few minutes, you will make a beautiful star with your own hands.

New Year's star made of threads. Master Class