How and what to clean the acrylic, enameled and cast -iron bath to Bela: methods, tips, cleaning products. How to quickly clean, wash the bath from rust, yellow and lime plaque by household chemicals and folk remedies: Cleaning recipes

This article describes recipes for cleaning acrylic, enameled and cast -iron baths.

Not so long ago, acrylic - plastic, which was previously used in dentistry, began to be used in the creation of plumbing. Now they make baths out of it. Strength, antibacterial properties, the ability to give a product of various forms - all these are the advantages of this material. But acrylic is very capricious in operation to detergent and cleaning agents. Therefore, it is worth finding out in advance what you need to clean the bathtub from acrylic so that it is always like new.

How and what can be cleaned by acrylic baths: cleaning products

Remember: for cleaning baths from acrylic, you cannot use different metal brushes and washcloths. It is permissible to use only a soft rag or sponge. Hot water is also dangerous. It can deform the plastic coating, and the bathroom will become unusable.

How is it unacceptable to clean the tanks from acrylic? Here is a list of chemical products, which is unacceptable when caring for such a coating:

• Detergents with abrasive particles: soda, dry cleaning products and so on. Micro are on the surface, due to which the bath loses its shine. Dirt enters scratches, and the surface will constantly be not only matte, but also dirty.
• Chlorine -containing agents. If they apply them regularly, acrylic will fade and a beautiful gloss will be lost.
• Acetone. The structure of acrylic is destroyed, and the surface is deformed.
• Means with ammonia. The effect of this tool is similar to the effect after the use of acetone.
• Formaldehydes. Funds for cleaning the bath should be preferably natural, and the harmful and dangerous components of cleaning products have a destructive effect.
• Concentrated alcohol, alkali and acids. Small cracks appear and color changes.

How and how can you clean acrylic baths? A few tips:

• The process of cleaning and disinfection is combined if you have a bathroom with hydromassage. Such baths usually have small holes in which fungi, dirt can accumulate. Therefore, before cleaning, fill the bath with water to the top, turn on the air supply, pour in the product and turn on the hydromassage mode. Then lower the dirty water and pick it clean again. Run the hydromassage and drain the water. Wipe the bath with a dry rag. Thanks to these actions, it will last you for a long time.
• After each bathing, you do not need to clean the bathIt is enough to rinse it with warm water and wipe it dry with a rag.
• You need to use funds 1-2 times a week.
• Every six months, the bath needs to be disinfected. To do this, dial a full tank of water, pour in a disinfectant and mix well. Hold for 20 minutes, drain the solution and rinse the bath with cold water.

Advice: If scratches appeared on the bath, and they are constantly clogged with dirt, because of this the surface of the bath seems ugly, then the upper layer needs to be restored. It is better to do this with the help of specialists, since this is a thin job and you can do it yourself even more.

Household chemicals for cleaning acrylic, enameled and cast -iron baths: a list of how to apply

Not all the means that are sold in the store are suitable for cleaning acrylic bathtubs. Only a few products of household chemicals should be used to clean acrylic, enameled and cast -iron baths. Here is the list and how to apply:

• Acrylan - It does not damage the acrylic surface and helps to get rid of rust and other dirt. This tool creates a thin protective film, so that the bath will shine beautifully after cleaning.
• Ravak - disinfects, cleanses, restores the protective layer.
• Acryl Polish - Gel, which allows you to quickly and safely clean acrylic. Restores, polishes, cleanses and carefully whiten the surface of the bath.
• Tim Profi - It does not contain harmful substances in its composition. The surface will not only be clean, but also disinfected.
• CIF - It is used in the form of a spray or cream. It does not contain abrasive substances. The bath is well washed from rust, yellowness, lime plaque and fat.
• Bass - The tool is presented in the form of a liquid suspension. Suitable for daily care for the bathroom.
• Cinderella - The effectiveness is confirmed by many housewives, but has a pungent smell, so you have to wear a respirator while using.
• Chistor - The manufacturers of this detergent invented such a formula when it was created, so that the fungus does not multiply on the surface and the dirt does not stick.

It's important to know: It is necessary to apply funds with a sponge or soft rag for 15-20 minutes. Then it is washed off with cold water. A clean bathroom must be wiped with a dry soft cloth. Sprays are applied with spraying and also left on the surface of the indicated amount of time, and then the product must be washed off with water.

Advice: If you bought a new tool for cleaning the bathtub, first squeeze a small amount per hand and feel it if there are hard lumps or small crystals in it. Only then use an acrylic remedy.

The package of the product indicates how many minutes it can be applied to the surface of the acrylic bathtub - adhere to this instructions.

How to quickly clean, wash the van of acrylic, enameled and cast iron from rust and yellowness of household chemicals?

As mentioned above, gross brushes and metal sponges cannot be used to clean acrylic tanks. Buy a special soft sponge or take a regular kitchen, but use only the soft side. How to quickly clean, wash the van of acrylic, enameled and cast iron from rust and yellowness of household chemicals? Tips:

• First wet the surface of the bath with cold water. Leave it for 5 minutes so that the water soaks rust and yellow plaque - then it will be easier to remove.
• Apply the product with a soft sponge. If you use the spray, then just spray them from the spray gun on the surface.
• Righten persistent pollution with a sponge - soft side!
• After 15 minutes, rinse the product with water.
• Wipe the bath with a soft rag or napkinSo that there are no drops of water on the surface.

Advice: If after cleaning you noticed that the dirt has not completely disappeared, repeat the process. Then rinse with water and wipe dry.

How to quickly clean, wash the van of acrylic, enameled and cast -iron from rust and yellowness with folk remedies: recipes

If you are not a supporter of the use of household chemicals, then you probably want to know how to clean the bathroom with folk remedies. They are always at hand, cheap and easy to use. How to quickly clean, wash the van of acrylic, enameled and cast iron from rust and yellowness with folk remedies? Here are recipes:

• A weak solution of citric acid. Type into a bath, to the extent of hot water (up to 50 degrees), add 50 grams of citric acid. Mix well and leave it for 2 hours. After time, drain the solution and rinse the bath with cold running water. You can rub the remaining dirt with a soft cloth. The plaque will soften well and will be excellent even with a napkin.
• Apple vinegar. Dissolve 20 grams of this product in a glass of water. Moisten a napkin in the solution and wipe the surface of the bathtub. Then rinse the bath with running cold water.
• Baking soda. Add a little water to the powder and apply the mixture to the surface of the bath - you do not need to rub! Wash off in 10 minutes.
• Toothpaste. Squeeze a little of this product for soft rags and wipe the contaminated areas. Wash off the paste with water and wipe the surface of the bath dry.

These natural remedies do not harm health and do not have negative properties. Therefore, many housewives often use them to clean plumbing in the bathroom.

How to quickly clean, wash the van of acrylic, enameled and cast -iron from lime plaque by household chemicals?

The funds with which you can clean the acrylic bathtub were published above. All of them do not contain abrasive substances, they have a soft structure and there is no acid and alkali in the composition. But how to quickly cleanse, wash the bath enamel or cast -iron from lime plaque of household chemicals? Below you will read the tips.

The cast -iron bathtub has an enamel coating, so it can be safely attributed to the type of enameled types of plumbing, and the funds for cleaning cast iron with enamel will be the same as for ordinary metal with enamel. The enameled and cast -iron bathtub has a more durable layer of coating than that of acrylic plumbing. But still, such a bathroom must also carefully care for so as not to damage the enameled coating.

• Do not use solid and metal brushes for cleaning - Only a soft fabric or sponge.
• Do not use abrasive productsthat can scratch the surface.
• It is forbidden to use chlorine -containing fluids, since the enamel can turn yellow from them over time and the bath will look dirty and groomed.

Household chemicals for cleaning the enameled bath:

•   Mister Muscle. Perfectly not only cleans, but also disinfects.
• CIF. A popular remedy that has been actively used by housewives for many years.
• Comet-gel. The enamel does not scratch and perfectly removes all the pollution.
• Sanct. Powerful detergent. Removes even the most complex pollution.
• San Clin. Without phosphates and solid abrasives. Suitable for any type of coatings.
• Frosh. Unable to cope with complex contamination, but is great for daily cleaning.

Advice: All these products are easily washed off with water and do not harm human health. But still put on gloves during cleaning so as not to damage the skin of the hands.

How to quickly clean, wash the van of acrylic, enameled and cast -iron from lime plaque with folk remedies?

The lime plaque makes the snow -white surface of the enamel ugly and dull, sometimes even adds yellowness. But there is not always a store for cleaning at hand, and you need to whiten a bath urgently. In this case, folk methods come to the rescue. How to quickly clean, wash the van of acrylic, enameled and cast -iron from lime plaque with folk remedies? Here are recipes:

• Mix salt and soda, add a little water to make a gruel. With light movements and a soft sponge, apply the mixture to the contaminated areas of the bath and leave for 30 minutes. Then rinse with warm water and wipe dry.
• Dilute sorrel acid with water 1:10. Lubricate the plaque with a solution and leave for 30-40 minutes. Rinse and wipe with a soft cloth.
• Pour a little baking soda on a sponge, sprinkle on it with water and treat the bath with light movements. This method is not suitable for acrylic baths. Do not use calcified soda, since when interacting with water, it turns into a rigid abrasive agent.

Advice: If you doubt, use a particular tool for cleaning the bath, then apply it to a small area of \u200b\u200benamel and wait a while. If enamel has not changed color and structure, then the product can be used.

How to clean a bathtub with baking soda and citric acid: recipe

Among the folk methods of cleaning baths there are those who are most popular among hostesses due to their effectiveness. These include a mixture of soda and citric acid. Recipe for a tool that helps to clean the bath:

• Drill soda and citric acid. First, apply a soda solution to the surface of the bath and a little water. Wait a few minutes. Then apply a solution of citric acid and water (the solution should be in the form of gruel). Leave it for 30-40 minutes, and rinse with running water.

After using this product, the bath will become snow -white and brilliant.

How to clean a bath with vinegar?

Vinegar has long been used for disinfection and cleaning of kitchen utensils and plumbing. If it is used, for example, with soda, you will get an effective cleaning agent - sparing for the surface and not harmful to health. How to clean a bath with vinegar? Recipe:

• First apply a solution of baking soda and water in the form of gruel to the surface of the bath. After 20 minutes, apply 9%vinegar on top of the soda mixture. Vinegar will immediately react with soda. It helps to perfectly cope with any raid on white enamel.

When it passes for 30-60 minutes, rinse with soda and vinegar with water and wipe the surface with a napkin.

How to clean the bath with ammonia?

Facular alcohol is another effective tool for cleaning the surface of the bathtubs. A recipe that helps quickly and easily clean the bath with ammonia:

• Stir soda with ammonia to get a thick gruel. Apply the mixture to the surface of the bath and leave for an hour. If necessary, then increase the time by another hour - to remove persistent pollution. Then rinse with water and wipe dry.

Using this method, you can easily get rid of severe pollution - yellowness and rust.

How to wash a bath with soda?

As mentioned above, it is better not to use soda soda for cleaning baths, as it is a rigid abrasive. But, if you have calcified soda and you want to wash the bath with its use, then first dissolve this powder in the water. The stones formed will have to be removed, as they poorly dissolve in water. Apply the resulting mixture to the surface of the bath, and then wipe it with 9%vinegar. Leave it for half an hour and rinse with cold water.

Attention: Before using the product, test it on a small section of the tank!

How to wash, clean an acrylic, enameled bath to glisten: an AMVei gently cleaning remedy - Soft Cleaner

AMVei is known for offering cleaning and detergents that are harmless to human health, but effective to use. How to wash, clean an acrylic, enameled bath to shine?

Soft cleaning agent Amvei - Soft Cleaner It copes with any pollution and gives the surface shine. The composition of this tool has highly active ingredients, but there are no caustic alkalis and acids. In addition, using such a tool is profitable, since only one drop can cope with great contamination.

Bath care advice

Many people like to take a bath with sea salt and essential oils. These products leave fat and dirty traces that need to be removed immediately. If this is not done, then the bath will lose its splendor and will seem dirty and groomed. What else needs to be done so that the snow -white reservoir always shines clean? Tips for care and cleaning baths:

• After each bath or shower Wash off the dirt with water using products suitable for daily care.
• Disinfection once a week or less. This will help prevent mold.
• If the bath needs to be washed or cleaned, but there was no household chemicals at hand, use folk remedies.
• Conduct a general cleaning in the bathroom every week. Be sure to clean the pipe in a timely manner. This will help to avoid their clogging, which leads to stagnation of water in the bath and the appearance of an unpleasant plaque and smell.
• Store shampoos and other detergents closed, So that you do not accidentally pour them. Each remedy leaves a mark on enamel and then you will have to clean the bath once again.

Information in this article and tips will help not only with pleasure to take a bath, but also to maintain the health of all households.

Video: how to wash the acrylic bathtub, Life -hack (How to Clean Acrylic Bathtub)