How to knit a crossed loop on the wrong side, front side? Ornaments using crossed loops. Recommendations for beginners on the implementation of crossed loops

You can find out how to create wonderful knitting products using this article.

Content

It is simply impossible to remember every pattern that is performed on knitting needles. However, each such pattern is a combination of certain loops, which are only a few. If you are just starting to learn the skill of knitting, and are familiar only with the facial and wrong loops, you can very quickly perform an elastic band on the knitting needles, tie a small product from stocking or scarlet knitting. Trying carefully, you can get embossed pigtails.

In the manufacture of which products can you use crossed loops?

Crowned loops have several appointments. Thanks to them, Arana in ornaments with moved loops are much more expressive. In this case, the UPP (crossed loops) are performed along the contour in the areas where the first loops and the last loops are intertwined. The weaves themselves come out outlined. If you use them in the manufacture of harnesses, rhombuses and braids, then the patterns come out neat, convex, embossed. Professional craftswomen are familiar with this technique. They can use it even when this is not indicated in the schemes.

Rezniki with the UPP are not so elastic, therefore, they can better keep their shape during knitting. The product with such an elastic band is almost not deformed during socks, and therefore can serve the owner longer. But here it is necessary to take into account another important point - the resulting elastic bands of the pattern more than the usual options.

Accordingly, during the calculation of the number of loops when recruitment instead of a control pattern, an elastic band is performed using SCP. During the addition, when holes for the Nikids are not required, the crochets themselves are performed using UPP. This method makes it possible to fill in empty places using a special structure of the UPP.

Important: with the help of UPP, flowers, stems, leaves are clear. This can be achieved if you knit a variety of openwork drawings on LP and IP.

The last method is very often used in those Japanese patterns where it is necessary to make a clearer texture of the pattern, for example, a leaf, vein and so on on a common product.

It must be remembered that the SCP knitting needles are very rare. This special option has its own clearly defined goals of application, although it is often used by craftsmen. Consequently, ordinary patterns do not need to be performed with such a technique, because because of this, the appearance of the drawing can change quite strongly or even deteriorate, and therefore the result can turn out to be completely different. Although, when many contours are executed on the front side using the UPP, then the texture begins to stand out against the background of a product made by a stocking knit.

With this method, you can, for example, make a product on which your initials will be depicted. They will not spoil the thing, make an unusual accent on it.

Designations:

P is the loop
P is a row
KP - AMMOL loop.
LP - front loop.
IP - the wrong loop.
SCP - crossed loop.
LSKP - front crossed loop.
SKAP - the wrong clipped loop.

How to knit a crossed loop on the wrong side?

To perform the pattern you will have to stock up:

Knitting needles
Yarn

CRUSP is performed with 2 methods.

Method 1

Type a certain number P at your own discretion. As a rule, such UKPs on the wrong side are rarely used, can be combined with some ornaments. If you want to perform a shaped pattern using UPP, then it is better to use the LP:

Remove KP.
Make a knitting needle to the right side. It should be located with you from the edge. Direct the knitting needle to the right to the left. Make sure that the working thread is always in work.
Using the right knitting needle, grab the working thread, pull it on the face.
Reset the P of the past P, as you do while performing ordinary P.
Thus, you should get UPP.

If you want to tie a continuous canvas, then you must constantly use the working thread during the knitting of the wrong way of the UPP. This differs from the ordinary IP UPP - you need to enter the right knitting needle starting from the left side to the right in P., therefore, this type P is still called "IP for the back wall." This name can not be found often. Especially the term was used by our grandmothers and old knitting magazines.

Enter the needle to the right, which is in the right palm on the left side.
The working thread, at the same time, place on the other knitting needle that you hold in your left palm.
Capture the working thread, stretch n on the face.
From the past P you need to reset.

Method 2

UGP URP can also be performed by the following method:

Remove KP.
Enter the working thread on the right side on the left side to P, using the same method as during the execution of ordinary IPs.
Bring the working thread to the end of the knitting needle in the right palm.
Turn the thread into it by stretching onto the face.

Such SCP is quite simple. You will spend quite little time on the manufacture of the product. But you should know that most often the LP is performed precisely by the crossed method, and the IP are made the most common. But sometimes many craftswomen do the opposite. The pattern turns out to be very dense, but it is made no faster than a stocking ornament.

How to knit a crossed loop on the front side?

While working with knitting needles, a large number of diverse P. They can serve for a variety of purposes. The most common species is the SCP facial. The walls of such P are located in the form of a cross. These n can be used during the manufacture of socks, gloves and other knitted products, where the canvas should turn out only dense, durable, not at all stretched. A distinctive feature of the UPP - they are tilted in one direction, therefore, the canvas is obtained, like skewed.

In order for you to get the UPP on the product’s face, begin to enter the end of the knitting needles of the right hand in the 2nd P, located on the knitting needle of the left palm behind. At the same time, stretch the knitting needle by the 1st P.
2nd P, perform on the face. Stitch the 1st p on the face, then dissolve these n-just remove the left hand from the knitting needle to the knitting needle of the right hand.

Ornaments using crossed loops

SCP can be attributed to a separate category. They are obtained due to the execution of P with a special method or combining simultaneously LP and IP different types. Thanks to such P, you can get beautiful ornaments. In addition, UKP you can make a sweater or blouse with a facial canvas. As a result, the product will have an unusual decoration.

Gum from UPP

1 p - “1 LSKP, 1 SKAP”. Repeat from "to".
2 p - “1 LSKP, 1 SKAP”. Repeat from "to" and so on.

Relief using SCP

From 1 p to 9 r inclusive, all dishonest P, knit as follows: “1 LSKP, 3 SKAP, 1 LSKP, 1 SKAP, 1 LSKP, 1 SKAP”. Repeat from "to".
From 2 p to 10 r inclusive, knit all even P as follows: “1 SKAP, 1 LSKP, 1 SCAP, 1 P Remove (the thread should be in front of the work), 3 lp, 1 p remove.” Repeat from "to".
From 11 p to 19 r inclusive, all odd P, knit as follows: “1 LSKP, 1 SKAP, 1 LP, 1 IP, 1 LSKP, 3 IP”. Repeat from "to".
From 12 r to 20 r inclusive, knit all even R Ras: “3 lp, 1 p remove, 1 IP, 1 LP, 1 IP, 1 p remove”. Repeat from "to".

Column using SCP

1 p - “1 LSKP, 1 SKAP, 1 LSKP, 1 SKAP, 1 LP, 1 IP”. Repeat from "to".
2 p - “2 LSKP, 1 IP, 2 lp, 1 SKAP”. Repeat from "to".

Corners using SCP

1 p - “1 IP, 1 LSKP, 1 IP, 1 LSKP, 1 IP, 4 lp, 1 IP”. Repeat from "to".
Hell all even R as indicated in the diagram. (LSKP knit a City).
3 p and 15 p - “1 IP, 1 LSKP, 1 IP, 1 LSKP, 1 IP, 3 lp, 1 IP, 1 lp”. Repeat from "to".

Recommendations for beginners on the implementation of crossed loops

So that you do not get a bad result at the end of the work, try to take the necessary threads and those tools that are indicated in the description for knitting.
You should always have a hook nearby. With the help of him, you can catch the loop that you lost.
During the use of SCP to threads, special requirements are absent. Get the yarn that you use during ordinary knitting. The presence in the PCP pattern on the consumption of threads practically does not affect.
In various schemes, the “crossed loop” value has differences. Sometimes such Ps are indicated “IP behind the back wall” or “LP behind the back wall”. Therefore, before knitting, carefully get acquainted with the diagram, description.
Never knit complex things using SCP. First, try to tie something simple, for example, a scarf.

You already know how LSKP and ISP are knitted. Therefore, you can easily use your own knowledge, making canvases. If you don’t understand something, then you can use training video tutorials.