How to make paper claws out of paper: origami, video

Paper claws are simple. You will need paper and scissors. As a result, you will get an excellent accessory for a suit for any holiday.

Content

Paper claws will be able to decorate and give a touch of piquancy to any suit on Halloween, New Year or another theme holiday. Making them is simple. You will find below 5 options Origami to create such claws. Choose anyone and create a “highlight” for your festive suit.

Materials for creating paper claws: List

The materials that are needed to create paper claws are simple and everyone has in the house. Here is their list:

Paper - Any will suit: format A4 Or a notebook sheet. You can use more dense in texture. It is worth knowing that it is easy to make claws out of plain paper, but they will turn out not wear -resistant. Thick paper is difficult to fold, but the product will turn out to be persistent and last longer.
Ruler and pencil.
Glue - Suitable PVA Or another for paper.
Scissors.
Gouesh or acrylic paint. It will be necessary if you want to change the color of white claws.

Now make comfortable at the table, and proceed to the process of creating the product.

Paper claws on the fingers - option 1: how to make paper?

Your attention is presented to one of the simplest and most affordable ways to create realistic paper claws on the fingers in the style of origami. To perform such a product, you will need a square from a paper sheet. If it is rectangular, you can give it the desired shape with the help of scissors, and then to make claws of paper, you just need to follow the instructions:

Bend the sheet diagonally in half. It is better not to bend the paper abruptly, otherwise the probability of mating it is to perform the process smoothly, but clearly.
Then turn the sheet and draw a straight line along the fold line. You can not do this if the line is already visible, but for convenience, you should still draw it.
Bend the side sides of the square to the strip, which was carried out before. You got a figure consisting of two isosceles triangles - from above and below.
Fold the created quadrangle in half, bending 2 side sides to a strip of bend drawn in p. 1. On this straight axis of symmetry, bend the sheet from left to right.
Put the point in the middle of the longest side, then connect this point to the top opposite to this side.
After that, bend the sheet on the resulting fold. You can draw a segment with a pencil, this will facilitate the work.
Wrap the lower three-angle around and season its tip inside so that the paper is fixed.
Spread the resulting product.

Create again 9 clawsSo that the effect of this accessory is stunning. Read more this instruction in the video below.

Video: Light Origami on Halloween. Claws

How to make paper claws on your fingers - option 2: from paper, origami

Here is another interesting option for creating paper claws on the fingers of origami paper. Stages of creating such a stylish accessory:

Draw a triangle on A4 leaf. It will be a template workpiece. The base of the figure with three corners should have the correct size so that the claw later endow the finger well.
Remove the measurement from all your fingers in diameter, and this indicator will be the main dimension.
Consider the following: you will wear an accessory on naked limbs or gloves. To the size you need, add more 5 mm on the allowances that are necessary for gluing the parties.

Cut the resulting template workpiece and draw its contours on cardboard paper. The resulting figure with three corners, cut and turn the “tube” in the form of a cone.
Now glue the sides with each other. For this we added 5 mm To the width to the sides.
Leave the conical tube for a while so that the glue is well dried.
After drying the workpiece, apply two marks diagonally on the cone.
Cut the part on them on them 3 parts. For this process, it is recommended to use a stationery knife. If you have it, use scissors.

Insert these details - one into the other, adhering to the correct order, namely the one in which the connection was made until this moment.
It is worth noting that the elements are inserted at a small angle, otherwise the effect of “real claws” will not work.
Complete the "joints" using adhesive tape or any Clayster.

Advice: If you are mistaken with the dimensions, then you can cut a little so that the claws do not fall from your fingers.

In order for these elements to look more reliable and interesting, and it is convenient to wear them, you can glue the claws to the old gloves. To do this, follow the following actions:

Put on the accessory (glove) on the hand and apply glue to the surface of the nail inside.
Then put it on the finger of gloves.
Wait a little while the glue dries.

Important: If the gloves are made of materials such as leather, leather -altitude or rubber fabric, then gluing can be performed directly on the arm, since such products are not able to pass glue. If gloves are made of tissue material, before gluing parts, put them on a pencil. This technique will help to better glue the details and do not stain your fingers.

When all the claws are glued, make coloring using gua. Instead, you can use acrylic paints.

Video: How to make paper claws?

How to make paper claws on your fingers - option 3: from paper, origami

Soon holidays on which you can take part in different scenes, carnivals, but in thematic costumes. Therefore, it's time to think about creating a costume for you or a child. Paper claws on the fingers will be an ideal addition to many types of robes.

In order to create such a product, you need to prepare materials from the list above. Here are the instructions for performing such origami from paper:

First, make a square blank from a rectangular sheet. To do this, put the sheet with the smaller side to yourself. Take the right upper corner and pull down so that the upper side is applied to the left.
After that, a small rectangle will remain, which will protrude beyond the edges of the paper, cut it. It is only very important to bend the paper exactly so that the claw is neat.
Next, bend the square so that a rectangular triangle forms.

Paper claws on the fingers - the process of creating

Fold this triangle diagonally, after which it will become equal -pin.
Then fold again along the diagonal line, starting from the upper point, while the lower point of the bend should be between the lower sides.

Put the triangle with a sharp fragment in the left side.
Draw a strip from the base of the tip of the claw to its upper point and bend a smaller corner to it.
Press all the bends well, and expand the last.

If you did everything correctly according to the instructions, then as a result you will get a claw that you can put on your finger.

How to make paper claws on your fingers - option 4: from paper, origami, video

Another option for creating unusual paper claws on fingers in style Freddy Kruger, for which neither special paper folding skills, nor material costs, or a large amount of time are required. The method is simple, and the resulting result will be able to surprise. It will only need a4 paper.

Follow the instructions below, and you will definitely get this product using the origami technique:

Take the album sheet and make a square out of it. To do this, bend the paper so that it turns out a quadrangle, at the top of which there is a triangle, from the bottom - a rectangle.
Cut the rectangle and expand the sheet.
Bend the square in half - you should get a rectangle.
Turn the resulting rectangle in half - it turned out a four -layer square.
Cut the paper on the fold lines to get four identical squares. Each small square is a blank for a claw, as a result you get four claws.
Bend the square in half diagonally - you get a triangle. Carefully rewrite it along the fold lines. After that, expand the sheet.
Bend the side side of the square to the fold line.
Turn the paper over the back and bend the lower (that is, the top of which lies on the bend line) the triangle up.
Wrap the untouched side of the triangle that you did in paragraph 6. If you bend the left side, wrap the right. If you bend the right - left.
Take the angle in the “pocket” formed in paragraph 7.
Do all the points three more times with the remaining blanks. Make the claws as much as you need. Ready.

Video: how to make claws out of paper? Origami Claws.

How to make a paper claw origami - option 5: from paper, video

With the release of the film "People x", the number of fans has increased Wolverinewho want to have the same legendary claws as his. This led to an increase in demand for various types of accessories. But why spend a lot of money if an accessory can be created at home from simple materials that are always at hand. In order to create paper claws for origami for one hand, you will need:

6 sheets of A4 (it is better to take a dark color paper so that they look more realistic). If this is not, then white is suitable.
Scissors.
Subtle adhesive tape.
Insulating tape.

After you prepare the necessary materials, you can start work:

To begin with, put the paper sheet in a horizontal position, roll it in half and reward in the bending strip so that it is clearly visible.
Accelerate it and see that it is divided into two fragments - to the upper and lower.

Then bend the lower fragment, while leaving 5 mm From the edge of the leaf to the fold.
Spread the workpiece and you will see two strips of bend.
Bend the lower fragment of paper in half, and then turn it to the middle of the sheet 2 times.
Turn off the second side in the same way, but first turn over the sheet.
Take one of the extreme corners of the already folded turn and bend it so that the direct triangle comes out in the end.
Fold in the same way the angle of the second side.
Then we make sharp spears from them. To do this, turn the bends on both sides.
Now take the fold lines and smooth them out. It turned out on 2 stripes Backing. Take the scissors and cut the edge of the paper along the top lines.
The edges that remained again bent and fold the sheet in half. The edge that was cut and lower, glue with adhesive tape, and leave the third one not touched.
You got a kind of “arrows”, for safety take scissors and make a rounded edge rounded. There are three pieces of similar blanks - for one hand.

Take a white sheet A4. The corner on the right and below, bend and start turning it into a tight tube along the diagonal line. So that such a workpiece does not unfold, glue the tip with tape or glue.

Now make a semblance of a snail shell, turning the tube, as in the photo above. Take the tube by the edge and bend it four times. Take a piece of adhesive tape and swap this “snail” with it so that it does not unwind.
Do the same 2 the same blanks.
Take these “snails” and glue them with tape so that you can comfortably hold them between the fingers. With the help of adhesive tape, strengthen them again.
When glue the sticks, you will get a trident and three shot blanks.
Now take one blank and put it on a stick with a cut edge.
Fasten the places where the sticks are connected to the blanks.

The claws are ready. You can please fans of Wolverine with such an amazing gift or supplement your outfit for a costume party.