How to make a house from paper: voluminous, round, origami, from twisted paper - useful tips, instructions, photos

In order to get a beautiful house from paper, just follow our instructions.

The paper can be considered the most affordable and light material for creativity. Especially great joy gives the child joint work with parents.

We are sure that they will be pleased with the house that can be done with your own hands. Such a lesson will like  not only girls, but also to boys. Girls can make a doll house. How to make a simple paper house in a matter of minutes?

Volumetric paper house

First of all, stock up on a fantasy that will help create a unique masterpiece, sharp scissors, good glue and, of course, paper. You can choose a paper not only white, but also multi -colored and different density - it can even be a notebook or sheets from the album, paper for drawings (its price, of course, differs from simple, but it is convenient to work with it, it is well glued ).

Also:

• ruler
• sharp pencil
• stationery knife
• maslar tape

Glue can be diverse: PVA, hard in the form of a pencil or in tubes - the main thing is that it be of high quality.

To decorate the house you need to take:

• paints
• multi -colored pencils
• medical cotton wool
• lace
• beads

Prepare the surface for work, it can be a table or any other flat plane.

We make a sketch of the house

Before starting work, it is necessary to prepare a sketch of the future house. It will depend on size, volume, complexity or simplicity of design. If you have the opportunity, purchase a large sheet of paper on which you can immediately draw a house. If this is not possible, then take a smaller sheets and draw every part of the house on a separate sheet.

Cutting out The resulting drawing, you should not forget that the right side remains not bent for the subsequent application of the glue, and it should be renewed. Whether the floor is needed, this is already at your request, but the child will do well without it, if you put the finished house on a flat surface.

Connection of the details of the house, decoration

1. Before gluing the house, make windows and a door with a knife. From the windows, the paper needs to be removed, but on one side of the door do not cut the paper so that they go ajar.
2. The decoration stage is better to start before assembling the parts of the house, otherwise it will then be much more difficult to do. Give your child a chance to show his imagination, even if he himself decorate The walls of the house with paints or pencils.

   

3. To make a finger on the door, cut a rectangle out of cardboard and glue with a painted double -sided tape to the edge of the door. The roof can be decorated with tiles, making it from brown or green squares.
4. You need to start glue the tiles from the bottom in a checkerboard pattern. Listen daure a gli eat only half of the square and overlap each row - so to the very top. The roof can be decorated with cotton snow by gluing it on PVA glue.

   

5. We proceed to cut the house, make bends at the corners of the walls and grease the bend with glue that we left earlier. Let it dry. If you have too thin paper to give the house stability, glue its base to dense cardboard.
6. If you allow you to do time, make a second floor, balcony, porch.

Round houses for small gnomes from paper

The houses will be very original. They will become a wonderful housing for small gnomes. The houses can be made of different heights and widths and create a whole village.

Necessary materials:

• Cardboard or thick paper
• White paper
• Multi -colored paper
• Glue
• Glue gun

At the stage of drawing a sketch, you need to draw a large rectangle or take a ready -made sheet of rectangular paper.

• Fold the sheet in a tube and glue the junction. Cut the windows and doors from colored paper, glue them to the cylinder.

• Make a paper cone - this will be a roof. Combine it with the body with a glue gun. The roof can be decorated with sparkles.

House of twisted paper tubes

You need:

• Thin paper
• Cardboard
• Glue
• Sharp scissors
• Simple pencil
• Decor

Cut the A4 sheet into 3 equal parts in width. Twist rectangular pieces into the nightstand, smear the edge with glue so that it does not unwind.

• To make the tubes easier to twist and they were the same in diameter, take a pencil around which and twist the tubes. There are many tubes, they can be spinning during the construction process.

• If you make sticks of different lengths, then the house will be rectangular, if the sticks are the same - square.
• Take a cardboard of any color - it will be the base of the house. Before starting work, cut half the tubes on each side by 0.5 cm.
• We proceed to the construction of the walls. Put the tubes in the shape of a square and glue them to the base.
• The second layer: laid long tubes on the opposite sides, and short on other opposite sides.
• We make 3 layer the other way around - where there were long tubes, we put short ones, and where short ones are long.
• Already on the 4th row we cut out a hole in one wall for the door. We also lay 2 layers and cut out 2 windows. We cover the seats of the cuts with strips of paper or glue with double -sided tape.

• Using a toothpick or skewer, twist small tubes, glue them together and insert them into the doorway. We also divide the windows into 2 frames using small 2 tubes connected by glue.
• On the inside of the windows, glue a square of colored blue cardboard with curtains. To keep the square, glue it with tape.

• We make two sides of the roof from the tubes connected together and cut in the form of 2 triangles, we make the other two parts from multi-colored cardboard rectangular shape. Glue to the top of the house.

• At your discretion, you can decorate the window and the door.
• We make tiles from colored cardboard, cutting it with stripes, and cutting one side with waves. We begin to glue the roof below.
• We also make steps from tubes glued together and glued with adhesive tape. There should be three steps. By the same principle, you can make a windowsill.

We also make the railing on the steps from tubes. You can supplement the house with a balcony or other elements. The flight of imagination is not limited.

Paper house in the technique of origami

Such a small house is perfect for a paper doll.

You will need:

1. Color cardboard
2. Glue
3. Sharp scissors

• From a yellow cardboard, cut a square 15*15 cm. We bend it in half. Bend the upper and lower side to the center.
• Turn the sheet. Now we repeat the manipulations, but we already bend the other sides.
• We unfold, you should get small squares.

• Using a marker, mark the stripes on which it is necessary to make cuts.

• Combine two internal squares with one and the opposite side with glue.
• We glue the extreme squares in the joints of the joint to the first, already glued square.

• We make a roof from a square with a side of 8 cm. We bend the two edges in the middle. Glue the roof.

• We have to make a window and a door.

Paper House for the New Year

You need to take:

• White dense cardboard
• Paper
• Glue
• Sparkles
• Ruler
• Paints
• Pencil
• Scissors
• Sharp clerical knife
• Decorative jewelry (tinsel, small bells, miniature balls)

We start work:

1. Draw a house on a white sheet, cut it out or find a ready -made template on the Internet.
2. To make the house durable, glue it to the base of cardboard using a painted double -sided tape.
3. Cut the glued parts along the contour of cardboard. Make the doors and windows with a pencil, cut them out with a clerical knife.
4. Fold all the parts of the house on the fold lines and collect the house by gluing it with glue.

   

5. For the house to hold it, you can primed it.
6. Let the house dry and cover with paint.
7. Decorate the house at your discretion.

Video: Paper House Origami