How to make a boomerang with your own hands from paper, cardboard, plastic, which returns: step -by -step instructions, scheme

We make a boomerang with our own hands from paper, cardboard, plastic: step-by-step master class.

Content

Learning to make toys with your own hands from available materials! Today we will tell you how to make a boomerang with your own hands from available materials.

How to make a boomerang with your own hands from paper, cardboard?

Want to teach a child to create toys with your own hands? A little time and perseverance, and then you can run to the street to launch a boomerang, which returns, and at the same time it was created by the hands of the child!

How to make a boomerang with your own hands from paper, cardboard:

We study the boomerang scheme that we will create;

Do -it -yourself boomerang from paper: scheme

We take thick paper or cardboard, scissors, pencil, PVA glue and ruler;

Cooking everything necessary for the manufacture of boomerang

On a sheet of paper or cardboard we draw a rectangle in the size of 17*14 cm;

We cut out a rectangle and divide it into four parts in a size of 17*3.5 cm;

Cut the strips that are boomerang blasts;

Now fold the blades as in the figure;

Having folded the strips of overlap, we align the core, which should become a rectangle with dimensions of 1*2 cm;

We mark the lines of the "overlap" with a pencil;
Lubricate the blades with PVA glue in the joints and glue it according to the marked lines;

We put the glued boomerang on a flat surface for 5-12 hours, until completely dry;

On the edges of the blades we round the edges, placing any suitable round object on the blade. In our case, a small bottle of PVA glue. It is not recommended to make a semicircle with a circuit, since the hole from the needle will violate the integrity of the structure;

Cut the edges of the blade and cut off the irregularities so that the design is as smooth as possible. We go out into the street and try to run the boomerang so that it will return!

Video: How to make a boomerang paper?

How to make a boomerang with your own hands from plastic?

Want to make a boomerang that you can use for a long time? Do not know how to make a boomerang with your own hands from plastic? In this section, we give detailed instructions.

To work, we need:

Drawing paper;
Pencil and ruler;
Scissors;
Plastic cover or sheet of durable plastic 0.2-0.5 cm thick;
Jigsaw;
Sandpaper.

The course of work, how to make a boomerang with your own hands from plastic:

We study the drawing in the photo and recover or redraw in the appropriate proportions;

Cut the drawing and transfer to plastic;
We cut the plastic with a jigsaw. If there is no jigsaw, you can go the other way - heat the knife and cut along the contour with a hot knife;

We clean the edges with sandpaper so that it is comfortable to throw and catch, the better the edge is cleaned, the better the boomerang flies along the trajectory.