How to sew it correctly, stick an elastic band to a skirt on a sewing machine and manually: methods, instructions. How to sew an elastic band in the skirt belt, in the skirt of the sun, a chiffon skirt: instructions, tips. How to insert an elastic band into the skirt belt?

Ways to sew an elastic band to the skirt instead of a belt.

Most budget outfits are sewn from inexpensive fabric. To reduce the cost of the cost of the product and make it accessible to a wide audience, instead of classic lightning in the skirts and dresses, elastic bands are sutured. This option is ideal for the summer. After all, clothing on the elastic band is quite free and does not constrain movements.

How to sew a wide, decorative gum to the skirt, instead of a belt on a sewing machine: Instructions

In the summer, almost all women prefer clothes from light and flowing fabrics. Such outfits are pleasant to the body and do not contribute to excessive setting of sweat. If you love such fabrics very much and know how to sew a little, then we will help you sew an elastic band to your skirt.

The use of wide decorative elastic bands on skirts on the floor or short products made of chiffon in the “doll” style is relevant. These are skirts with folds that give the image of some romance.

Tools:

• Elastic band 5-8 cm wide and length equal to the waist
• Threads
• Scissors
• Pins

Instructions:

• Such an elastic band is sewn on top of the fabric by applying on the front side.
• You need to do all the additional work with a segment of the fabric, that is, to overwhelm it and outline the places of the back.
• After that, it is necessary to fix the beginning and end of the elastic and in several places on the fabric.
• In this case, it is necessary to pull the elastic slightly so that the fabric under it is a little larger in width. This will allow you to freely wear a skirt.
• After that, with slightly pulling, the elastic band is sewn on the typewriter. It is necessary to try to make the elastic be completely aligned to the places of fixation.

How to sew it correctly, to weed a wide, decorative gum to the skirt, instead of a belt manually: instructions

Manually this is quite problematic. The fact is that during sewing the elastic tape itself will have to be pulled all the time. The tension force is difficult to calculate so as not to pull. Otherwise, you will not pull the product on yourself or on the contrary will sit quite freely.

Materials:

• Threads
• Scissors
• Elastic
• Pins

Instructions:

• You need to process the main canvas with an overlock so that the fabric does not crumble. After that, make assemblies and outline them with a pin.
• Cut a piece of elastic band, slightly less than the waist. Sew the edge of the elastic band by the beginning and end of the skirt.
• Now pull the elastic a little so that the fabric is leveled and in 4 places, fix the elastic band on the fabric.
• With uniform stretching, sew the elastic to the fabric with a “forward needle” with small stitches.
• Repeat the procedure only in the empty places between the stitches. Ideally, you should get a seam similar to a line.

How to insert an elastic band into the skirt of the sun, chiffon skirt: tips

There are several ways to insert an elastic band into the sun-coat skirt. Usually a hole in order to wear a skirt is made equal to the volume of the hips. This allows you to freely put a skirt over the head or legs. Next, we will consider the easiest option.

Materials:

• Scissors
• Elastic
• The needle with a thread
• pins

Instructions:

• Measure the width of the elastic band and make a canal of the same width on the belt in the belt or 0.5 cm larger.
• After the move is ready, with the help of a pin, fix one end of the elastic on the belt.
• Strengthen the pin to the second tip and pull this elastic into the hole. Lying the elastic band until it starts with the tip.
• Sew both edges of the gum among themselves. Sew the hole in the skirt.

How to sew an elastic band in the belt of the fatin skirts: instructions

Many craftswomen who sew Fatin skirts sometimes do it with a lump method. That is, flashes of fabric are simply imposed on the straightened elastic band. It turns out a rather magnificent skirt, originally formed on the belt. But there are other options. Sometimes the gum is sewn in a classic way.

Tools:

• Scissors
• Threads
• Needle
• Pins
• Elastic

Instructions:

• Typically, a belt for a skirt pack of tulle is made overhead and decorative
• This is necessary in order to hide all the seams and places of fastening of the flaps of fabric
• It is necessary to pin an elastic band on the front edge of the skirt with pins.
• After that, the belt is fixed using pins at a distance every 10 cm
• After that, the belt is pulled and the elastic band is sewn using a sewing machine

Sewing an elastic band is not as difficult as it seems. This is the easiest option for decorating a belt for summer dresses and skirts.

Video: Sew an elastic band in a skirt