A chocker on the neck with your own hands: from velvet, satin tape, lace, beads, fabric and skin. How to make a chocker with a suspension?

A chocker on the neck with your own hands: from velvet, satin tape, lace, beads, fabric and skin. How to make a chocker with a suspension?

The necklaces are different. If the tattoo-chopper is persistently associated with shocking and rebellion, then the elegant velvet on the lady's neck or Ribbon Choker is stylish and very fashionable. What is important - a chocker on the neck is easy to make with your own hand. Study the workshops on the manufacture of Choker, presented in the article, and create jewelry that emphasize your personality.

How to make a chocker on the neck of velvet?

Perhaps this is the simplest mocker of all possible options

Choker on the neck of velvet
Choker on the neck of velvet

Materials and tools

Materials for the manufacture of a choker
Materials for the manufacture of a choker
  • velvet tape 50-60 cm long can be purchased in stores with materials for needlework

Tip: If you prefer velvet with dense fixation, buy an elastic velvet tape

  • counters - special latches for the ends of the ribbons - allow you to beautifully and carefully arrange stars, without resorting to the help of glue or needles. As a rule, such accessories are sold in stores with materials for needlework / for jewelry
  • plafers and scissors

Production instructions:

  1. Cut the required tape length
  2. Fix the ends
Tin-items with teeth are fixed using pliers
Tin-items with teeth are fixed using pliers

 

Wear a chocker, tying a beautiful bow in the back

How to make a black chocker on the neck of velvet?

Choker on the neck of velvet
Choker on the neck of velvet

Materials and tools

  • the tape is velvet
  • counters
  • connecting rings
  • lacking with a chain that helps adjust the neck of the neck
  • suspension or medallion (optional)
  • plafers and scissors
  • sewing needle, sewing threads (tone tape)

Production instructions

  1. Measure the neck volume (Osh). For example, Osh was 33 cm
Take into account: the neck should be measured where the choker will be located
Take into account: the neck should be measured where the choker will be located
  1. Collect the castle. Using the connecting rings, attach to the lock lock. You must get the collected element of fixation of the velvet
  2. Lay out the resulting mount on any solid and flat surface. Measure its length (DZ). For example, the length of the collected fixing element (see photo) is 3 cm
Left: a fixing element of a necklace in a collected form
Left: a fixing element of a necklace in a collected form
  1. Taking into account the length of the fixing element, the pure tape length (BC) should be

CD \u003d Osh-DZ or BC \u003d 33-3 \u003d 30 (cm)

  1. Be sure to make allowances for attaching the ends (1 cm each on both sides). As a result, the length of the tape will be 30+2 \u003d 32 cm
  2. Cut the required length of the tape. If you plan to decorate the chocker with a suspension with a special ear, put it on the tape
  3. Fix the ends
  4. If your chosen suspension/pendant/medallion does not have an ears, sew or attach a decorative element using a connecting ring (first noting the middle of the tape)

A fashionable necklace-chopper is ready. Such a choker can be worn And as a daytime decoration, and as an evening accessory

Choker design option. In the manufacture, they used: velvet tape (width - 1.5 cm); suspension with a wide ear (the color of the stone corresponds to the color of the tape); Labber-Lobster with a control chain
Choker design option. In the manufacture, they used: velvet tape (width - 1.5 cm); suspension with a wide ear (the color of the stone corresponds to the color of the tape); Labber-Lobster with a control chain
Choker design option. In the manufacture, they used: velvet tape (width - 1.7 cm); Hanger suspension (handmade) and a rocky glass bead; Labber-Lobster with a control chain
Choker design option. In the manufacture, they used: velvet tape (width - 1.7 cm); Hanger suspension (handmade) and a rocky glass bead; Labber-Lobster with a control chain

How to make a chocker with your own hands from a satin and velvet tape?

Squirer from a satin or velvet tape
Squirer from a satin or velvet tape

Materials and tools

  • velvet tape/satin length 50-60 cm
  • counters
  • large connecting ring (the diameter of the ring should exceed the width of the tape by 1 cm)
  • plafers and scissors
  • glue for fabric

Production instructions

  1. Lay the tape on a flat hard surface
  2. Cut into two identical halves
  3. Put the connecting ring on top of the average cut
Fixation of the ring with glue for fabric
The location of the connecting ring
  1. Wrap the free ends of the tape, forming the holders for the ring. Fix the loops with glue
Fixation of the ring with glue for fabric
Fixation of the ring with glue for fabric

Tip #1: If there was no special glue at hand - do not despair. Loops can be fixed by making several neat stitches using a needle with a thread

Tip #2: If a needle with a thread, the stitches are not your best friends, arrange the edges of the tape using beautiful endings. Be sure to make sure that there are loops for attaching connecting rings on the ending. Fix the ring using connecting rings

Unusual idea: a transparent chocker with a ring looks interesting

Transparent chocker with a ring
Transparent chocker with a ring

To make such a necklace, use silicone straps suitable in width. You can buy them in stores with materials for needlework. Fasten the ring with rivets. The chocker is fixed on the neck using ordinary buttons. Rivets and buttons will help you install in the clothing/shoes/bag repair workshop

How to make a velvet -velvet black with a suspension? Do -it -yourself chocker

Agree, it is the suspension that determines the character of Choker.

The suspension is possible

  • buy in a jewelry store if you like expensive jewelry
  • buy in the department "Everything for jewelry" if you prefer a democratic style
  • find on a flea market or in an antique shop (for lovers of jewelry with history)
  • do it yourself. Handmade suspension is a great way to stand out from the total mass and even a little fucking

For the manufacture of an original pendant for a choker, you will need

  • a tin cover from a bottle (for example, beer). The cover should not be deformed
  • decorative elements: beads, beads, stone crumbs for jewelry, cords, etc.
  • the glue is quick -drying. In this case, it is convenient to use an adhesive gun, which can be bought in the department of building materials
  • awl
  • jewelry wire (5 cm) or connecting ring
  • pliers
  • file

Choker suspension instructions

      1. With the help of an awl, make a through hole in the side of the lid
      2. Spery metal burrs with a file
      3. From the wire with the help of pliers, form a loop. If you decide to use the connecting ring, miss this step
      4. Fix the loop in the hole of the lid / insert the connecting ring

Tip: At this stage, you can also paint the outer side of the lid with acrylic paint

Production of a suspension from a tin cover
Production of a suspension from a tin cover
      1. Decorate the suspension using decorative elements and glue. In the case of using sequins or drawings/photos to decorate the suspension, use transparent epoxy resin for jewelry and jewelry to fill the void and create a protective screen
Suspens of tin covers decorated using stone jewelry crumbs
Suspens of tin covers decorated using stone jewelry crumbs
Do -it -yourself Choker suspension: design option
Do -it -yourself Choker suspension: design option

How to make a black tattoo black

Options for making a choker tattoo houselots of

The simplest scheme of weaving tattoo choker is presented in the photo below

Classical Choker tattoo scheme
Classical Choker tattoo scheme

A step-by-step photo instruction will tell the main stages of decoration manufacturing

1. Start by preparing materials

The main material for the manufacture of a tattoo chocker is Spandex, known among choker-pounds as a silicone thread or a vein thread
The main material for the manufacture of a tattoo chocker is Spandex, known among choker-pounds as a silicone thread or a vein thread

Tip: You will need Spandex with a thickness of 1 mm and a length of 3 m. You can purchase a special fishing line for weaving choker in stores with materials for needlework

2. Fold the vein in half and fix it with tape or a large stationery clamp

Spandex fixation with tape
Spandex fixation with tape
Spandex fixation with a stationery clamp
Spandex fixation with a stationery clamp

3. Focusing on the diagram, proceed to weaving tattoo chok

Focusing on the scheme, proceed to weaving tattoo chok
Weaving tattoo chocker

Photo21

As soon as the snake reaches the required length, fix the last node and cut the ends of the spandex
As soon as the snake reaches the required length, fix the last node and cut the ends of the spandex

The tattoo chopper stretches well, so there is no need to use a special lock for choke. Many choker -fibers fix the last node in the first loop of the snake. Such a jewelry through the head is put on

If there is a need to adjust the length of the jewelry, use jet locks with chains and special endwriters for decorative cords

How to make a chocker tattoo from beads?

Tattoo chocker from beads
Tattoo chocker from beads

Tattoo from beads combines elegance and originality

A simple way to make a bead tattoo tattoo

      1. Take two strong threads (fishing lines) 1.5 m each
      2. String the beads to each of the threads
      3. Tie the chock using beads instead of spandex (you will find a knitting scheme in the section “How to make a black tattoo”)

Advice. Beaded tattoo-chopper It is worth decorated with a special lock lock

Tattoo chocker from beads (scheme)

For beginner needlewomen, such simple schemes are suitable

Choker weaving schemes (or bracelet) from beads
Choker weaving schemes (or bracelet) from beads

The weaving technique from beads is quite simple, and the techniques are repeated. After reading the description of the work according to the first scheme, you will easily create many beautiful accessories

You will need

  • blissworm fishing line - 3 m
  • large beads of various shapes and colors (blue hearts or other curly beads-10-15 pcs, round blue beads-2 pcs., Round brown beads-2 pcs.)
  • flasping for jewelry
  • scissors

Production instructions

      1. Put the lock on the fishing line, fix the fishing line in the middle of the fishing line. So you get two identical working threads in length
      2. String blue and then brown beads on both threads
      3. Divide the threads and string on each 9 beads
      4. Combine the threads and string the curly bead (heart)
      5. Continue knitting, alternating the actions of paragraph 3 and paragraph 4
      6. As soon as the chocker reaches the required length, first string the brown and then blue beads on both threads
      7. Fasten the castle ring with a double node. For the reliability of fixing the tips of the fishing line, season in a curly bead

The third scheme can cause difficulties, since it uses a reception of parallel weaving. A more detailed scheme of technology is presented at the bottom

Parallel weaving technique
Parallel weaving technique

How to make a beads a scraper: a weaving scheme

The scheme of the beads below is for experienced beads. However, for the sake of such beauty, it is worth a little work

Biser necklace diagram
Biser necklace diagram

How to make a mug from lace?

Chocker from lace
Chocker from lace
      1. Buy a lace tape of the required length. How to determine the length of the tape (lace or velvet) is told in the section "How to make a black chocker on the neck of velvet?"
      2. Fix the ends, attach the jet lock or sew the buttons

The decoration is ready. If desired, the chocker can be decorated with beautiful beads or medallion

Coker made of lace, decorated with beads
Coker made of lace, decorated with beads

How to make a white lace chocker?

Delicate mud will fit well into the summer wardrobe

White lace choker
White lace choker
      1. Cut the lace of the required length
How to make a lace choker: step1
How to make a lace choker: step1
      1. Fasten the ends
How to make a lace choker: Step2
How to make a lace choker: Step2
How to fix the ending on the chocker?
How to fix the ending on the chocker?
      1. Fasten the connecting ring and lock
How to make a lace choker: Step 3
How to make a lace choker: Step 3

Your decoration is ready

Choker is white lace
Choker is white lace

How to make a black lace mocker?

The manufacture of this choker will require certain efforts, but see how beautiful this accessory is!

Choker black lace
Choker black lace

Materials and tools

  • black felt (for a flower)
  • black lace ribbon (Choker base)
  • thin red braid (for decorating the base)
  • black braid 1 cm wide (for ties and slices)
  • black chain (for decoration)
  • scissors
  • pins
  • needle and thread

Production instructions

      1. Make a flower template
How to make a lace choker: creating a template
How to make a lace choker: creating a template
      1. Cut out of felt
  • 6 elongated elements (for petals)
  • 2 circles (for the middle)

Fold the elongated elements so that the lower part is slightly longer than the upper, and fix it with pins

How to make a lace choker: Flower assembly
How to make a lace choker: Flower assembly
      1. Take one of the blanks of future petals and lay a stitch along the fold line
How to make a lace choker: Flower assembly
How to make a lace choker: Flower assembly
      1. Pull the thread a little: a small fold is formed on the fabric. Without cutting off the threads, do the same manipulation with all the blanks
How to make a lace choker: Flower assembly
How to make a lace choker: Flower assembly
      1. Collect all the petals, the shape of the flower. Sew a circle on top. Decorate a circle-invention with beads (black and red) or sequins
How to make a lace chocker: a finished flower
How to make a lace chocker: a finished flower
      1. Decorate black lace with red braid
How to make a lace chocker: decorating lace-one
How to make a lace chocker: decorating lace-one
      1. Fasten the red braid, while sewing the black braid tastes. Make a slice by sheathing along the entire length of the braid
How to make a lace chocker
How to make a lace chocker
      1. Measure the chocker. Sew a flower at a point that will conditionally divide the tape by 2/3 and 1/3. In place of fastening of the flower on the wrong side, sew the remaining circle. If desired, fix the decorative chain
How to make a lace chocker
How to make a lace chocker

How to make a chocker on the neck of fabric

Such a vintage choker looks unusually elegant

Fabric neck
Fabric neck

Materials and tools

Choker materials and tools and tools
Choker materials and tools and tools
  • wide lace (lace length is equal to the girth of the neck)
  • black tape 1.5-1.7 cm wide. The length is if desired, but not less than 60-70 cm
  • beads or beads for decoration
  • scissors
  • needle and thread

Production instructions

      1. Make figure sections at the end of the black tape
Fabric neck
Fabric neck
      1. Mark the middle of the tape and lace cut. Combine these points by laying the ribbon on the lace from the wrong side. Fasten the pin. Moving from the center, fasten the tape and lace along the entire length of the lace element
Fabric neck
Fabric neck
      1. Gently sew the tape and lace
Fabric neck
Fabric neck

The long ends of the tape will give the accessory a special charm

Choker on the neck of fabric: rear view
Choker on the neck of fabric: rear view
      1. Decorate the chocker bead
Fabric neck
Fabric neck

How to make a leather chocker with your own hands?

Such shocking decoration is suitable for real rebels, and to make it easier

DIY leather chocker
DIY leather chocker
      1. Select a suitable width belt
      2. Try on the neck belt
DIY leather chocker
DIY leather chocker
      1. Cut the excess. Place the cut place with a suitable ending
DIY leather chocker
DIY leather chocker
      1. Decorate the chocker at your own discretion

Advice. The medallions made of lightning will look good on a leather chocker

Photo55
Video: Ribbon on the neck. Decoration for the image of a witch or woman of a vamp. Anna’s Perlen. Beads with Anna



Author:
Evaluate the article

Add a comment

Your e-mail will not be published. Mandatory fields are marked *