Knitted cap for men with knitting needles. Crochet cap and knitting needles for a boy - scheme. How to knit a male cap for the winter?

In this article you will find information on how to tie a male cap for both the boy with knitting needles and crochet. Knitted caps can be created in various ways. Some of them will be presented in the article.

Content

This season will be in the trend of caps, baseball caps, etc. They not only look great on their heads, but also perform different functions. Heat in the cold, and in the summer they save from the heat. For a child, a cap is just a necessary headdress. In the summer, the baby will feel comfortable and will not overheat in the sun. You can buy any model of cap in the store, but it will not be special. And a knitted cap with your own hands will be unique. Consider how to tie such hats for men and boys.

Knitted cap for men knitting

A warm knitted cap will warm you in cold weather. It will not be difficult to tie it with knitting needles if you are familiar with the technical side of knitting. Below, see the example of a knitted male cap, which not only looks beautiful under the common bow, but also warms perfectly in the cold season.

How to knit a cap for men with knitting needles?

The product is knitted with knitting needles of thick woolen threads. The usual pattern is platele knitting. That is, all loops tie the front in both even and odd rows. The cap consists of eight parts. Clin, share facial loops. The visor is knitted by the front surface. The shell is crocheted. A hats are laid on the bell. The visor is connected according to the scheme of the front stitch.

The size:

The main part of the cap is a radius of 12-13 centimeters
Frank 2 centimeters
Visorer 5 centimeters.

Process:

Start knitting the accessory from the center of the upper part. The product is knitted on the sock knitting needles. Start the process from the crown. You should first crochet a loop, and then make eight from it. Distribute these loops on the knitting needles two pieces for each.
Only these loops are always knitted with facial. The loops are all the time added in reverse crochet through one in 1-3 circle, in total it turns out 13 in each wedge.
After moving to another knitting scheme. All even rows knit persons. P., and odds.
The increase in the seventh, thirteenth, seventeenth, twenty -third and twenty -seventh round.
If you want more caps, add the loops more.
After that, make a decrease. In total, about 80 loops on all knitting needles should be released after the decreases. Moreover, reduction is made not in every circle, but in the first, fifth, seventh, eleventh and fifteenth row.
For a finished type of accessory, you will need a hook. Stitch all the loops in half -stolks, make three circles.

Knitting visor:

In general, visors are always doubled in order to hide the solid material that will give shape inside. You can add and reduce the loops by eye, but only experienced craftswomen can do this. Nakids are made by crossed loops, and reduction at the end of the row with knitting two loops.

Process:

Type about 39 loops.
In the second row, all the loops are exhausted.
The third row - persons are knitted. And first, the end of the row, reduce one loop from two sides. But before and after the center loop, make a crochet.
Further, everything is out of p.p. + reduction at the beginning and end of knitting.
Knit the front loops in the fifth row + decrease, still make two additions from the center loop after the first and fourth on both sides symmetrically.
In the sixth row, all the loops of the faces. + reduction at the beginning, end.
Then persons.p. And reduce two loops on each side, and make the increase symmetrically relative to the center loop.
In the eighth, all the loops are exhausted, reduce two loops.
Then persons.p. Make a decrease at the beginning, the end of the row.

At the end, take the hook and knit all the loops in half -stolks, connecting two parts of the product.

IMPORTANT: The number of loops in the row can be different, you can adjust the number yourself depending on your preferences.

Crochet cap and knitting needles for a boy - schemes

The knitted cap is essentially universal in use and is suitable for both men and women. And for children the accessory is indispensable. In winter he warms, in the summer it saves from the sun. Next, consider how to tie a children's cap with a visor with your own hands.

Tools, materials:

Black and gray yarn with swaps of acrylic. Two skeins of 148 grams.
Two hooks for the visor and for knitting the bottom. For a visor, use a smaller hook so that it comes out denser.
Cardboard or other material in order for the visor to keep in shape.
Scissors, threads.

Process:

You should first determine the size. To do this, measure the volume of the head, using such calculations as: OG: 3.14 - this will be diameter.
Now crochet a ring with amigurumi from 4 VP. Connect VP with connecting columns. Then knit SBN - 6 pieces. In the next row, 12 sbn. And so in each row increase the number of columns by six loops. Knit the strips in a circle, alternating colors.
So knit the base of the cap-beadballs to the desired diameter. When finish, tie the accessory with a rim below. You will need two circles of SBN for this.

Bind the peak for the baseball cap according to the scheme provided above.

It will require white yarn.

Dial 16VP, using a smaller hook than indicated on the labeling of threads.
In the first round of 1SBN in the second column from the edge. 1SBN in all loops + 3SBN, turn the canvas, knit 1SBN, and the last 2 columns knit 1SBN + Soid. pillar. + SBN. Turn knitting, knit 32SBN.
The second row: start with VP + 1SBN, 2SBN, 1SBN in 13 loops of the previous circle. 2SBN, 1SBN, 2SBN in the next column, 1SBN in columns of the base to the last loop. At the end of 2SBN, Soid. column., 1SBN. 36 loops will come out.
In the 3rd circular row-V.P., 2SBN, 15SBN, 2SBN in one loop, 1SBN, 2SBN, 2SBN in one loops of the previous circle. There will be 40 loops at the output.
In the fourth circle - V.P., 1SBN, 2SBN in the next column, 17SBN, 2SBN in one column of the previous circle. 2SBN, in the last two columns, knit 2SBN, 1SBN, SBN. The output is 44 loops.
In the fifth circle - 1VP, 2SBN, 1SBN, 18SBN, 2SBN, 1SBN, 2SBN in one column of the previous row. After knit the SBN, until 2 columns of the previous row remain. In them, knit 2SBN, 1SBN and Soid. pillar. There will be 48SBN in total.
In the sixth circle - VP, 1SBN, knit in each column of the previous circle. Turn the visor. Knit six more rows according to the same scheme, cut the thread, insert dense material into the canvas so that the visor holds the shape and sew the product.

In the end, it remains only to attach the visor to the cap, hide all the threads and all the baseball cap is ready.

Below will be presented schemes for knitting caps in various performance:

How to knit male cap for the winter with knitting needles?

Not only women, but men love to look beautiful. Fashionable new items attract almost everyone. Some male representatives are reverent to their species. It is important for them to wear to look attractive. Now the trend is knitted things (scarves, clamps, sweaters, hats). The caps came into fashion just recently. Of course, there is a large selection of such accessories on the market. But with your own hands, knitted caps will look at many times better than finished products. After all, you will create a model that will correspond to your preferences.

Men's knitted hat with a visor: how to tie with knitting needles | All about needlework — Insulated cap with pattern corn

Such a winter male cap, tied with a pattern of corn and insulated inside with a felt, can be tied to your husband, son, brother for a gift.

The product will be suitable for such sizes: the head of the head is 58-60 centimeters.

Tools, materials:

Suitable circular knitting needles
Yarn - for your choice
Fetr for warming caps inside
The material for the visor, which will give it the desired shape.

How to knit a cap with male knitting needles for the winter?

The following patterns will be used in this master class:

Knitting with the front stitch - only facial loops are knitted in all rows.
Knitting with a panting viscous - the rows alternate (in the even persons are knitted, and in the odd exhaustment)
Pattern of the corn - in an odd row, loops are knitted, alternating faces. and output. And in even over the faces. They knit out the outlet, over the output Persons.p.

Process:

For the upper part of the cap, pick up one hundred loops on circular or sock knitting needles and knit the first rows with a plate pattern. It is enough to knit 1.5-2 centimeters.
After switch to the pattern of the corn. Alternate and shift the faces. P. and output. In the ranks. And start making an addition. In the first circle of knitting, evenly add twenty loops.
Then knit thirteen centimeters, measure the height of the product from the very beginning of knitting. Then reduce three loops.
In the next row, still reduce 12 loops so that one hundred and eight left.
Then again reduce 12 pieces so that it is already 96.
Those still reduce 12 loops in a circle in a circle, until 12 pieces of loops are left at the exit. This turns out the last row of the upper part of the cap. To complete its knitting, pull all twelve loops into a circle with a thread.

Now it remains to knit visor.Craftswomen with extensive experience are advised to use thick threads and knitting needles for knitting less than indicated on the labeling of threads.

Type 38 loops on the knitting needles. For a visor, a pattern is used - a patch knitting. To make rounding, see the diagram below in the image, you need to knit shortened rows.
In each row left and right, one loop is reduced. Only 11 rows. The first row without decreases, the rest with decreases.
Repeat the last row again unchanged.
Start knitting another symmetrical visor.

When tie the product, insert a hard part into the visor, sew two parts of the product. Attach it to the hat. And inside the hat are insulated with felt.