Turnout Origami from paper on a stick, plastic with your own hands: description, photo

How to make a turntable of paper and plastic with your own hands: step -by -step instructions, photos of the best works.

Content

How is a piece of paper made with your own hands? In our article you will find detailed instructions and master classes with photos to make a turntable of paper for young children, and for schoolchildren who sometimes give such a task.

Paper's turntable on a wooden stick

Making such a piece of paper is relatively simple because it is small. And she has only one rotating element on a wooden stick.

To make a piece of paper from paper with your own hands, you will need the following materials:

Colored paper, preferably bilateral, so that the turntable turns out to be beautiful.
Good glue to glue the paper. Better choose not stationery, but more sticky glue. For example, a transparent “Crystal moment”, glue for rubber or glue from an adhesive pistol.
How to make a piece of paper from paper so that it spins? Use a clerical button for this. Such as in the next photo.

Little steel washers will also help improve rotation. In our workshop on creating a piece of paper from paper, they are used 4. On each side of the paper, two goals are put on a clove. Some people say that they have such a turntable and without washers.

So that your turntable from paper on a stick spins well, check that there is no rust on cloves and washers. You can even lubricate them slightly with machine oil.

Another necessary part for a piece of paper is a wooden wand. It should be wide enough so that clove can be scored into it. You can use a round wooden barbecue skewer. Then you need to saw off the sharp edges from it. A narrow wooden bar is also suitable.

As a result, our Origami-Vertushka will turn out to be the same as in the next photo.

How to make a piece of paper from paper with your own hands: step -by -step instructions

How to make a piece of paper from paper with your own hands:

Step 1: Cut the square from colored paper. In our example, it is 15 by 15 centimeters. It is better to choose double -sided paper, because we will bend the corners of the paper, and the wrong part on some details will become the front side of the turntable.

Paper turntable is a diagram where each cell is equal to one centimeter.

Step 2: Speak with a simple pencil the diagonals of our square. We will need them for further work.

Step 3: Now you need to attach the ruler to the diagonal and count from each angle of 4 centimeters. Put in these places fat points. To these points, it will be necessary to cut our paper square for the turntable with scissors.

We determine the points to which you need to cut the paper — Determine the points to which the paper needs to be cut

Step 4: We cut the paper to the marks and glue the corners to the center of the future turntable. Use good sticky glue for this, it is desirable that it be transparent and does not leave noticeable traces on paper.

Glue the corners to the center of the turntable

Similarly, wrap and glue all four corners of the turntable. Try to make the fold lines soft, do not imagine the paper.

Step 5: Now is the time to do the core of our turntable from paper. Take the clerical clove and put on it two washers of the suitable size. After that, pierce the paper strictly in the center of the turntable. Move a little clove in paper so that the hole expands and it easily “walked”. After that, put on a clove two more steel washers.

Step 6: It remains only to attach our turntable to Origami to a wooden stick. This is the last and probably the most difficult stage of work. First, try to drive a clove into the tree a little with your hands, and then score it with a hammer.

Cut the clove carefully. It should stay in a tree, but you can’t clog cloves to the end. The turntable should have a place to spin freely.

Video: DIY piece of paper for children

Turnip from plastic with your own hands

Paper turntable is a very entertaining toy. But the paper has a significant drawback - it is short -lived. Store turntables are usually made of thin plastic. Do you think you will not be able to find material to make such a turntable with your own hands? In this part of the article, we will tell you how to make a turntable on a stick of ordinary plastic pacific papers.

Twal folders are suitable or with a button

The result of your efforts will be bright and durable turntables similar to those in the next photo. Such turntables are suitable for children's games, and for scaring birds in the garden.

To make a turntable for children with your own hands, you will need such devices and materials:

Six colorful pieces of plastic, the size of an album sheet.
Superwood or a pistol with hot glue.
The hole punch that makes round holes.
Long nail.
A straw for cocktails, inside which your nail will be free. It is better if this straw is made of fairly dense plastic.
A wooden stick that will be a pen of a plastic turntable.

The petals of flowers that will be blades of our turntable, cut off the same shape as in the next figure.

Turnout from plastic with your own hands scheme

We need six such petals. To fasten the petals simply chips with their carnations in the middle will not work. And glue them with ordinary glue too. Glue for connecting plastic should be very good. You can use either a superglley or a pistol with hot glue.

Cut out six identical turntables for children from plastic. And then pierce holes in them, in those places that are shown in the next photo.

After that, coat the place around the round holes with glue and glue the blades with each other. When all the petals are attached, let the glue dry well. Only after that begin to bend them and glue them from the other side.

We sequentially glue the petals of the turntable with each other

Now it's time to connect all the details of the turntable. You need to cut off a small piece from the tube. He will put on a nail behind the blades of the turntable.

Combine the details of the turntable made of plastic

As a result of these efforts, you can get a durable and functional turntable for children made by yourself.

Multi -colored piece of paper from paper for children

We bring to your attention the following way to make a piece of paper for children. This turntable is very bright.

To create such a turntable with your own hands, you need the following materials:

Colored paper 4 different colors.
A sheet of white paper to make a stick.
PVA glue or other.
A small sewing hairpin and a bead to close the sharp end of this hairpin, if it sticks.
A thin cocktail tube so that the turntable is spinning well.

Multi -colored piece of paper for children:

Step 1: Cut squares from colored paper with a size of 7.5 by 7.5 cm. It is better if your colored paper is bilateral, because its wrong side in some places will become facial.

Step 2: Fold each paper square in half diagonally. And then cut it with scissors along the fold line.

Cut the paper squares into two triangles

Step 3: We circle the coin and cut out a small circle from colored paper - it will be the middle of our turntable for children. We glue the paper triangles as shown in the next photo. Each triangle should close half the previous triangle.

Step 4: Alternate petals of different colors. As a result, you should turn out that the green color is opposite the green, pink opposite pink, and so on.

All the details of the turntable in place

Step 5: Now you need to apply a little glue to the outer corners of the triangles. We will wrap them and glue them to the middle of the turntable.

When all the petals are glued, our future turntable for children will look like this.

Step 6: We make a wand from a sheet of paper. Start turning the sheet from its corner diagonally. Try to twist the paper tightly so that the stick is strong. By turning the paper, smear it in places with glue. Glue the last corner well. After that, you need to cut the upper and lower edge of the wand for the turntable with scissors.

We make a wand for a piece of paper from paper

Step 7: It remains to attach the petals of the turntable to the stick. Use a small sewing hairpin and a piece of straw for cocktails for this. If you have a sharp edge of the hairpin from the back of the turntable, then close it with a bead planted on glue.