Crafts from old car tires with your own hands - a path, a flowerbed, a pond, a swan, a sandbox, furniture, frog: instructions

In this article we will get acquainted with the ideas of crafts for a garden plot from old tires. There can be a lot of craft options.

Crafts from old tires today can be seen in the dachas, near the house, on playgrounds. Since these jewelry are easily made, plus they are durable and convenient in operation.

Old car tires

The paths to the garden of unnecessary tires have amazing qualities. For example, they are completely not slippery, simple during cleaning, resistant to negative influences.

For very narrow paths, take tires for a car. If you want to make a wide track, then you better take tires from trucks for work.

In order to make a track, perform the following manipulations:

Separate the side of the tires from the tread.
Divide the protector across so that you get long ribbons.
Lay the tapes in several rows. It all depends on what length of the path you want to get.
Prepare the base for this path.
Place wooden bars in the ground. Attach treads to them using self -tapping screws.

Please note that the distance between the ribbons should be a maximum of 5 cm so that the sprouted plants can decorate the path.

DIY flowerbed

Often, the tires that have outlived their own term are used by summer residents instead of flower beds. Here you must turn on your own imagination. We suggest you use the following options:

Put the tire on the place where the flowerbed will be located. Pour the tire with the earth, plant flowers into it. In order for the flowerbed to have an attractive appearance, paint it in advance the right color, apply patterns, ornaments and so on.
Put a few tires on each other. Pour the tires with earth, just do not forget about the decor. Such a flowerbed always looks unusual and beautiful from the outside.
Attach a strong plywood to the tire of the desired diameter, then attach 3 legs. You will eventually receive an original flowerpot that you can transfer to another place in the future.
Apply a zigzag or wave to one tire. Make a cut along this circuit. Remove the cut part, and turn the main half.

Use better tires that have maximum tread wear, so that your work is much easier. The color of the flowerpot and the shape of the petals choose at your discretion. And use the part that you cut off instead of a stand.

DIY car tire pond

The tire can become a small pond. If you have chosen a small place, but at the same time really want to build a cool hearth, then select the tire from the passenger car. In order to bring your more grandiose plans to life, then take the tire from the truck so that its diameter exceeds the growth of a person.

You will have to work at the following stages:

Clean the tire. Cut the upper part of the tire.
Dig a hole so that its diameter is equal to the diameter of the tire. Burring it so that the tire peeps over a couple of centimeters above the surface of the earth.
Level the bottom, fill the sand with a layer of about 15 cm. Remember the sand well, check the evenness of the sand surface using the level. After that, immerse the tire.
Make waterproofing using polyethylene. Distribute the material along the bottom of the recess, remove the film outside the tire by 50 cm.
Close the covering material especially carefully. You can press the film for convenience in the inside of the tire in large stones. Put the edges of the film in the gap between the ground and the tire, fill it with sand with gravel.

Decorate the design. You can take stones, flowers, shrubs for work. Try to completely hide the origin of the pond.

Swan from old tires

Swan is a classic tire craft. The main difficulty of work is the cutting of the product and alignment of the tire. Take better a tire that does not have a metal cord, so that your edges are perfectly smooth. The sequence of work is this:

Apply markings. Take chamomiles, draw a bird's beak, a head with a neck so that it goes into the body. Make the neck and beak so that their length is more than half of the circle.
Cut the tire along the contours. Do cuts alternately from both sides.
Turn out the side parts, lower the side half rings.

Strengthen your neck with wire. Make pair holes along the line every 15 cm. Insert the metal brackets, fix them with a rod.
Decorate the product: paint the beak, body, make your eyes, wings and so on.

Video: swan from tires with your own hands

Sandbox from old car tires: Instructions

The next unique craft for the garden is the sandbox from the tire. She will be able to decorate any children's playing area. Organize the sandbox with the following methods.

Take a large tire. Cut the top from it, attach a rubber hose to the edges, cutting it in advance. Paint the design in any color, you can apply patterns and ornaments. Set the sandbox in a small recess, pour sand.

Cut small tires, fasten their halves between each other to get an interesting flower. Attach to the ground. Pour sand.

DIY swing from car tires

Of the old tires, you can get wonderful swings of various shapes and levels of complexity. Here everything will depend on your imagination and experience.

Method 1

Place the tire vertically.
As a support, use a thick bitch on a tree so that its diameter is at least 15 cm. Scroll in 2 places of qm-bolt, then self-tapping screws with hooks on hats.
Tie the ropes or a chain to these self -tapping screws, attaching it with carbines.
Place the lower edge of the tire from the ground at a distance of no more than 40 cm, so that the children are more comfortable to sit on the swing themselves.
At the bottom of the tire, make drainage holes so that rainwater leaves better.

Method 2

Fix the tire horizontally - so you get a strong seat
With the help of rym bolt, make 4 mounts at the same distance from each other on the tire
Attach a rope or chain to the base, then attach to the tire itself
Tie the tie in several places with a rope, attach to the tree

Old tire furniture

The most unusual and practical furniture elements are considered. Use our recommendations, create a cozy corner for relaxation in your own dacha.

Fold for each other 2 tires. Paint them in advance in pleasant shades, cover with a soft and comfortable seat. You can make a table of several tires to the kit. Just take the tires those that have a smaller diameter. For countertops, use plywood or hardened glass.
Take the tire. Fasten 2 plywood of the desired diameter on it. From the central part of the plywood, glue the scourge in a spiral. This table will be the perfect decoration of a summer cottage and even living room.
Build the chair with the following method. Fasten 2 tires to each other. Using screws, attach the back to tires from another tire. Take separate protectors, make the railing from them. Instead of sitting, take a soft pillow.
Paint the tire with gold paint. Place the product on strong legs made of metal, cover with a glass of glass. As a result, you will get a stylish table.

Take the tires. Cut one into 2 equal parts so that you get semicircles. Connect the whole bus with half. Process carefully sections of the tire.
Build a comfortable place for a pet from the old tire. Paint the tire with bright paint, put a soft pillow or blanket in the inside.

Video: Garden furniture from car tires

Frog

An unusual solution for the garden is a frog made of tires.

Option 1

Make the head of a frog from a large tire
Put it on the side, fix it with a cement or layer of earth
Pour the fertile soil into the void, plant low and thick plants
Make your eyes to an animal of small tires, bicycle
Install them vertically, attach with screws
Glue the void of the tires with a film, draw pupils on it
Cover the structure with green paint, draw all the irregularities present
Plant around the plant, break the flower bed that will look like a fabulous swamp

Option 2

For the next craft, take 3 identical tires, then follow the following actions:

Place the tires so that 2 are below, and 3 tires lay on top of the center of the structure
Fix tires, cover with paint
The wheels that are below, paint so that they resemble the legs of the animal. Paint the upper tire in the form of a head
In the void of tires located horizontally below, put the pillows
Make your eyes from bicycle tires, install vertically, fix in the form of a bench back

Option 3

Take a large tire. Put it horizontally
Cut rubber on the edges of the tire, process from bumps
Pour sand inside the product
Take two small tires. Install them horizontally so that they resemble eyes
Paint the product in green

From the frog you get a great flower bed

Different crafts for a summer residence, a garden of tires

You were already able to get acquainted with those designs that can be made from old tires. In addition to them, you can make the following products for a summer residence.