DIY wedding decorations. How to decorate the car for a wedding with ribbons, flowers, balls, bow, tulle, hearts, rings: photo

Anyone can make a wedding decoration with your own hands. Choose an idea and make a wedding unique.

A wedding is a wonderful triumph that occurs in the life of every person. In order for this event to be perfect, you need to take into account all the little things, starting from the ransom of the bride, and ending with the design of the hall for the celebration.

• The decoration of the wedding motorcade is an important point, because guests and groom with the bride will go in the cars
• The task of designing cars is to create a special mood - a holiday, luxury and magnificence
• Wedding machines are an integral attribute of any wedding ceremony

How to decorate the car with tapes for a wedding with your own hands?

A stylish and original decoration will turn out if you use a combination of different textures and materials. Together with ribbons, an organza and atlas are often used to design cars. The fabric composition looks presentable and festive.

How to decorate the car with tapes for a wedding with your own hands? There are several ways:

The first type of decoration

• Take a tape in size of 2 hood lengths, and a width of 3cm to 5cm
• Stretch the tape through the radiator grill so that the average metal bar of this lattice is exactly in the middle of the tape
• Stretch the tape in different directions of the hood to get the letter V, and secure it under the hood with tape or linen elastic band. Can be tied to any internal part of the hood
• Now make bows or small flowers from organza or atlas. How to make original bows tells this article
• The number of bows depends on your imagination: a tightly located decor on the tape or at a distance of 10-15 cm. Fix the bows on the tape using a thread with a needle. Between the flowers, tie the tapes in the tone of the flowers (white or pink). When driving cars, they will develop beautifully
• Make a large bow from the cut of the white organza, and attach it to the radiator grill. The ends of this bow should hang almost to the level of the wheel

Instead of a bow, a bouquet of artificial colors can be attached to the radiator grill.

At the back of the car, make the same bow as the front, and attach it to the trunk door. If there are many flowers on the hood, then a small bouquet of flowers will look beautiful behind.

Remember: all jewelry by car should be made in one tone. It looks ugly when, in front of the decoration of a white-pink shade, and a blue behind.

The second method of decoration

• Take a section of the atlas or organza with a width of 20-30 cm. The length should be two lengths of the hood of the machine
• At a distance of 30 cm along the entire length of the cut, attach flowers from the satin tape
• Attach the jewelry to the hood and trunk door

The third way to decorate wedding machines

• Make flowers from white and green satin ribbons
• Collect several colors in a bouquet, and leave 7 or 9 pieces to decorate the tape
• Attach 4 air ribbons to the bouquet and fix them under the hood of the car. The bouquet should also be attached using tape
• Distribute the flowers along the entire length of the tapes and fix them

How to make a jewelry for a motorcade with your own hands is shown in the following video.

Video: Car Decoration_option B

Options for decorations from tapes are presented in a video located below.

Video: jewelry from ribbons to the car

DIY Big Bant

Every woman and even a man will be able to make a bow. It is enough to take a large section of the tulle, fold it and tie it arbitrarily. You will get a beautiful bow, but it must be attached from all sides to the car with tape, otherwise this beauty will develop in the wind, losing its original shape.

A harvesting of floristic felt will turn out to be much stronger and more beautiful. Stages of creating a large bow for a wedding car with your own hands:

• Take a piece of felt of the desired size
• Fold its edges to the middle and glue it, or sew
• Gather the workpiece with an accordion and tie a ribbon in the middle
• Now take a piece of smaller felt. Do the same with him as with the previous workpiece
• Fold the bows together and bandage the tape in the middle
• In the middle, sew a gold butterfly, heart or flower - bow is ready

In the video following, you can clearly see how the designer folds and collects the blanks together.

Video: easy, fast, cheap! DIY giant from felt for a wedding machine

How to decorate the hood of a wedding car with your own hands?

To make decorating a wedding machine, you do not need to be a designer. It is enough to have an idea, and be able to hold a thread with a needle in your hands. It is not necessary to be able to sew on a sewing machine, making the decoration easily manually.

How to decorate the hood of a wedding machine with your own hands told above. Here are a few ideas, how else you can decorate the car in front:

Jewelry for the hands of a car for a wedding with your own hands

Doors on wedding cars must be decorated with flowers or bows to match other decorative elements on the motorcade. Prepare the materials that you have from your hood decoration and trunk doors. Add a floristic grid, a little satin, felt and other fabrics that are in the house.

Follow such stages to make jewelry on the handles of the car for a wedding with your own hands:

• Take a section of organza in size 25x70 cm
• Collect Bant: With your left hand, Slender the fabric between the two fingers of the right hand. Fasten it in the middle with an elastic band
• Make the second same bow. Fasten two parts and tie several tapes of one or two colors
• In the middle of the bow, sew the flower from the satin, heart or other decorative element. To fasten parts, instead of a needle with a thread, you can use superglines

Tip: This method is suitable for creating jewelry for pens made of felt, satin or floristic grid.

Look clearly how to make such a bow in the video following.

Video: How to make a bow to the handles of a wedding machine yourself?

The length of the hood of the machine for wedding jewelry

Each brand of the car has certain dimensions of the hood. You need to make a wedding decoration of the machine, based on the dimensions of the hood and its other parts.

First measure the hood of the machine for wedding jewelry, and then proceed to their creation. The dimensions of the hood of some brands of cars:

• Toyota "Avalon": length in the center of the hood 105 cm, near the headlights 95 cm, width 145 cm
• Mercedes "W212": length 175 cm, width 150 cm, near the headlights 90 cm
• Ford "Focus": length 80 cm, width 60 cm
• Audi A3: length 100 cm, width 150 cm

Important: in order to prevent a mistake when creating jewelry, first measure the length and width of the hood of all machines that will be in the motorcade. Based on these sizes, the ribbon and other decor.

Do -it -yourself jewelry

The traditional decoration for the roof of the car is two ring rings. But now you can find a wedding motorcade with hearts, a basket of flowers and other decor.

Decoration on the roof of a wedding machine in the form of two rings is easy to make with your own hands. To do this, fulfill the following stages:

• Cut the soft water hose into 3 parts of different sizes. The small and middle part will be rings, and the largest part is the basis for the design
• At one end of the ring, insert the battery, hold it with your finger. Then put on it the second end of the hose and fix the joint with tape
• Make a second ring on this principle
• Wrap the rings of the gold floristic foil
• With the help of a superglue, fasten two rings. Glue them to the wooden ruler for 15 cm, and fix the blanks on the largest third wheelhouse
• Garnish the design with lively or artificial colors. The accessory is ready. Attach it to the roof of the car with tape

There are many other options for decorating the newlywed car:

In the following video, you will see many other options for decorating the roof of the newlywed car.

Video: Jewelry for the roof of a wedding machine

DIY wedding rings for a wedding car

The modern fashion for decorating wedding machines has gone so far that many people already prefer not only to make rings on a car of newlyweds. They come up with original jewelry that emphasize the individuality and high status of future husband and wife.

Make a crown with a veil of rings for a wedding car with your own hands:

• Make 6 rings: 2 - small, 3 - medium and 1 - large. Perform this decor according to the principle described above, as for two rings from a soft hose and special foil
• Glue the workpieces on a line of 50 cm long
• Attach the resulting design to the roof of the machine
• Make a design decor in the form of flowers in front and veil behind - the original decoration of the rings is ready

Tip: the crown can be made from cardboard by painting it in gold or silver. Do not be afraid to fantasize, and your wedding will be remembered by guests for a long time!

Jewelry for wedding mirrors

Now in a wedding procession they are decorated with car mirrors, earlier only by decor for the hood and roof. Do the jewelry for the mirrors of wedding machines the same as jewelry for the hood. Thanks to this, the entire decor in front of the car will be in harmony.

Tip: If you made a bouquet of 15 colors on the hood, then a bouquet of the same colors, but smaller size, is suitable for the mirror. 5 or 7 pieces are enough by the number.

Flowers and bouquets for a wedding car with your own hands

To create a bouquet, you will need cardboard, superclles, artificial flowers and a little matter of a contrasting color. Cardboard is necessary for the base on which the entire bouquet will be attached.

So, prepare the flowers to make bouquets for a wedding car with your own hands:

• Pull the cardboard with fabric and fix with adhesive tape or glue
• Large, and small flowers in the middle of the base. Glue one large bud in the center, but you can do without it. Do everything as fantasy tells you
• If leaves remain from the flowers, glue them along the edges of the workpiece
• Now attach the bouquet to the tape by car - the decor is ready

Tip: a bouquet of flowers of contrasting shades, for example, white and red, pink and red, white and pink and so on, will look beautiful.

Video: Wedding budonier on the door of the car with your own hands video master class

Video: DIY Wedding Wedding.

How to decorate a wedding car with your own hands by Fatin?

As mentioned above, along with ribbons, the newlyweds car is decorated with tulle. Bows, flowers, imitation of veil and more are made from it.

Here is another way to decorate the wedding car with your own hands by Fatin - pompons attached to the satin ribbon:

• Cut the tulle into rectangles 10-20 cm wide, depending on what size pompom will be, 50 cm long
• Fold all the rectangles together and add one rectangle of a contrasting color
• Fold the fabric with an accordion
• Fix the middle with a ribbon
• Straighten each layer so that the workpiece is lush
• Cut the edges with a semicircle or zigzag, according to your imagination
• Straighten all the layers again - the pompom is ready

In the video, the designer tells how to make a beautiful pompom of tulle.

Video:How to make pompons from Fatin?

Another way to make a pompom from tulle is described in this video.

Video: How easy to make a tulle pompon - DIY style - Guidecentral?

How to make hearts for a wedding car with your own hands?

The newlyweds like to decorate the car with big hearts, because this is a symbol of long and true love. To make such a heart is easy both from artificial colors and from living roses.

Important: if you make such a decor from living material, then choose fresh, just blossomed buds. Otherwise, flowers can quickly wake up.

How to make hearts for a wedding car with your own hands:

• First make the basis: cut the heart out of paper, and then transfer the pattern to cardboard
• Apply glue to the cardboard heart. Comers the old newspapers or sheets of magazines, straighten them a little, and attach to a cardboard workpiece with glue - this is necessary to give volume to the heart. When the entire cardboard is filled with paper lumps, swing the entire workpiece with tape
• Wrap the future heart with red lining paper or floristic felt, and fix all the edges with a stapler
• In flowers, cut the tails to get a smooth base
• Now glue one flower to the red blank, pressing the flowers tightly to each other
• When the entire surface of the heart is filled with flowers, spray the buds with water and sprinkle with a floristic sheen. After that, you can attach the heart to the car
• Make a white heart using the same technology, but wrap the paper blanket not with red, but with a white cloth

The next video shows how to make a large heart from tissue roses, which are also made with your own hands.

Video: How to make a big heart with your own hands?

Decorating a car for a wedding with your own hands step by step

Wedding chores are pleasant, but this fuss is a little out of the rut, and the newlyweds themselves and their parents often do not know what to take on and where to start, for example, when decorating cars. Step -step stages will help outline the front of work and their sequence.

Decorating a car for a wedding with your own hands step by step:

• If the machine is decorated with tulle and artificial flowers, then you need to make roses buds in advance
• Measure the hood length and cut the required size of the tape or tulle. Prepare a linen gum for ties
• Make two rings on the roof of the car, as described above, or any other decor
• From smaller flowers, perform bouquets for car handles and its mirrors
• If there is a basket with flowers on the trunk door, then do it in advance. How to make such a basket, read in an article about dIY bouquets
• If, as planned, a bow is located on the trunk door, then buy a tulle in advance, and make this decor
• In the morning, on the day of the wedding, start making the design of the car from the hood: pull the tapes or tulle, and fix it under the hood. Attach the flowers along the entire length of the tape, and on the radiator grille, install a bouquet with flowers
• Now proceed to the design of the back of the machine: fix the ribbons, attach a bow with a stapler or using tape, or install a basket with flowers
• Make the roof of the machine: install the structure with rings or other decor, fix it
• After that, you can start designing door handles and mirrors
• Check if all the details are fixed well. If there are doubts, strengthen the mount, because it is important that the structures and bouquets are installed beautifully, correctly and firmly

How to fix the fabric on the hood of a wedding machine, and attach jewelry?

The hood of the newlywed car must be perfectly decorated, because people immediately pay attention to this part of the wedding car when the motorcade drives up to the bride’s house or to the registry office.

How to properly and firmly fix the fabric on the hood of a wedding machine, and attach jewelry? Some nuances should be taken into account:

• A high -quality decoration of a car for newlyweds is a difficult task that requires certain skills and devices. But you can handle it yourself
• In order for the ribbons to hold well on the hood, it is necessary to process one edge and sew underwear to it. The second end of the gum is tied with a tape under the hood or sewn to the other edge of the tape
• Attach the decor to tapes (bows, flowers, and more) with superglue
• Large jewelry in the form of hearts, baskets with flowers or bouquets, tightly tie to the details of the car: to the radiator grille, to handles and mirrors
• To attach a large bow to the trunk door, pull the tapes first, and then tie the bow to them

Wedding machine decoration with fresh flowers

Living as a decor for a car look great. They create a special festive energy, publishing a unique aroma.

If you think that dolls, artificial flowers and just a few ribbons on the hood, this is trite, then make the decoration of the wedding machine with fresh flowers.

Important: a bouquet of fragrant roses in the bride, flowers in her hairstyle, decorating the hall with live bouquets and decorating the newlyweds of newlyweds recently torn buds, emphasize the high status of young people.

Tip: if the car is large (convertible or limousine), decorate it with flowers from the inside. The unique aroma will accompany you all the way.

Even delicate flowers will withstand the test of movement if you use a special sponge of water to compose bouquets. You can buy it in any flower store.

Tip: DO NEWS in such a way as not to close the review to the driver.

If you think that you yourself will not be able to make such an original decoration, contact an experienced florist who knows the language of flowers and understands the decoration.

Wedding machines decoration with balls

Balloons are the most inexpensive type of wedding motorcade.

Tip: buy only high -quality latex balls from trusted or well -known manufacturers. Chinese analogues can be busted when the machines are moving.

Decorating wedding machines with balls just do it with your own hands:

• Make a garland of balls, tied them to each other. Make this decor of balls of two colors, for example, red and white, pink and white and so on
• Tie the garland on the hood of the car and several of these products to the handles of doors and mirrors

Remember: jewelry should not interfere with the driver while driving!

If you plan to make a retro style or the theme of your celebration “Love Is ...”, then the design of the machines with balls will be the most striking decoration for the motorcade.

How to make a heart out of the balls is described in detail in the following video.

Video: heart from balls - wedding design

How to dress up, decorate guests for a wedding?

Much attention is paid to the decor of the newlyweds car when designing a wedding motorcade. Therefore, the question often arises: how to dress up, decorate guests for a wedding?

Remember: all cars should be decorated in the same style.

It is enough to attach bouquets with flowers on the door of the handles and mirrors to the guests' cars. If you want, then you can finish the hood with ribbons. In any case, guests should look more modest than cars with young.

Examples of wedding machines decoration: photo

Think about the decoration of the cars in advance so that before the wedding itself do not fuss, worrying about what design will be and what materials to buy.

Here are examples of decoration of wedding machines - photo:

There are a great many options for decorating cars, and even a carriage for a wedding. Choose a suitable option, add your imagination, and create real design masterpieces!

Video: original and beautiful decoration of wedding machines.