How to make a large, magnificent and beautiful bow from the tape on the head, for a gift, for discharge from the hospital? How to make a bow from a wide, narrow and thin tape with your own hands?

To make a beautiful bow from a satin or nylon tape is simple. Such an accessory can decorate a gift, clothing or interior item.

• Each woman has its own secrets and tricks that allow you to facilitate and decorate our life
• Bows from tape and other materials are able to add festive mood and supplement the outfit, hairstyle, gift set, table setting and other interior and clothing items
• Many women think that it is difficult to make a beautiful bow on their own
• But this is not so, all people are able to create a beautiful masterpiece
• You just have to prepare materials and you can proceed to such an interesting type of needlework

How to make a simple beautiful bow from the tape with your own hands?

Previously, bows and long ribbons weaved for girls into braids. Currently, first -graders are attached ready -made lush bows made of satin or nylon ribbons.

How to make a simple beautiful bow from the tape with your own hands? The simplest and most beautiful bow is obtained from a two -tone satin tape.

To make such a decoration, you need to perform the following stages:

1. Prepare 20 cm with a wide tape (5 cm) of a light shade, and 40 cm of a dark tower of a width of 2 or 3 cm
2. Fold a wide tape and glue the ends as shown in the figure
3. At the top, attach 20 cm of thin tape and also glue the ends. Glue them to the folded ends of the wide tape
4. Wrap the remaining 20 cm of thin tape in the middle of the resulting “sandwich” and make a not tight knot
5. Bet the ends of the tape into the node or leave them free so that you can tie the bow to clothes, hair or gift packaging

Here are a few more ways to make simple bows:

Another way to make a simple bow can be seen in this video.

Video: How to make a bow from a tape of any size?

You can make a beautiful bow from thin braid, folding its segments in the form of an “eight”, and then sewing them in the middle. The more details, the more beautiful the bow will turn out.

Important: making a simple bow is easy. Show fantasy and in a few minutes the accessory for the holiday will be ready.

How to make a large lush tape bow?

To make such a bow is easy:

1. Buy a tape of the desired width. The length depends on how magnificent the bow should be - 1 or 2 meters
2. Fold the tape "accordion"
3. Tie in the middle of the Kapron thread. Leave the ends free so that the product can be tied to a gift or to the hair
4. You can make a "sandwich" from separate glued elements, bandaging in the middle

Another way to make a magnificent bow. Prepare 2 meters of white tape and small beads.

Such a “royal” bow consists of separate small banks, which are sewn to the base of white felt. In order to make small elements, take such steps:

1. Cut the tape into equal segments 10-20 cm, depending on what size a bow is needed
2. Fold in half, out of the wrong way
3. From a bent line, at a distance of 2 cm, you should drop the glue and press this place with tweezers so that the tape is glued
4. When the glue dries, turn out the bows, and make a fold at the ends
5. Fix the ends with a thread and sew to the base
6. You can decorate such a bow with rhinestones by gluing them to the middle or beads of different colors. Everything - the product is ready

How to make such a "royal" bow can be seen in the video.

Video: Listen Banting for a Kindergarten

It is worth noting: such a jewelry can be put on a daughter in a graduation in kindergarten or on September 1. It will perfectly complement both a magnificent dress or school uniform.

How to make a bow from a wide tape?

Often, a “butterfly” tie needs to choose a suit of an adult or child. Of course, you can buy it in a store, but not always in the assortment there is a suitable color. Therefore, you need to make such a tie yourself.

Full the following stages:

1. Prepare 20 cm of tape 5cm wide and 18 cm tape 3 cm wide
2. Fold the segments in half and glue the ends. Fixed them with a needle so that the glue holds well the edges
3. When the glue dries, put one element on the other and make the stitches in the middle
4. Pull the thread and fix the thread
5. In principle, this is enough, but you can bandage the seam location with a thin tape to match. "Butterfly" is ready

Beautiful "roses" are obtained from the wide tape. How to make such an original bow from a wide tape? Everything is simple.

Full the following stages:

1. Wind the tape on the hand, as shown in the figure
2. Make a knot and remove the product from the hand
3. Straighten the rose petals, bending them inside
4. Do all this to the last petal
5. The more magnificent the rose, the longer the tape should be

How to make a bow from a thin tape?

Stylish and attractive on any interior or clothing item looks like a bow made of thin tape. He adds sophistication and elegance. How to make a bow from a thin tape?

To decorate gifts, a festive table and a Bant Dior Bant is often used as an accessory for clothes.

To make such an accessory, follow the following steps:

1. Prepare 1m tape 1-2 cm wide
2. It must be cut into segments of different lengths. The number of these segments will depend on how magnificent the bow you want to do. The length of the turns make such a size that this bow goes along the entire length of the packaging box, the longer the coils, the more beautiful
3. Place the finished turns on each other, gradually reducing the size of each turn
4. The last turn should be no more than 1 cm in diameter
5. Fix the resulting bow with a thin ribbon to match, hanging it into the last round
6. Such an accessory can be attached to any surface: flat or round

Sometimes you need to make many small bows from a thin tape. An ordinary fork will help this. Full the following stages:

1. Prepare a satin ribbon with a width of 0.6 cm and a dining plug
2. Put the tape on the fork, leave the ends of at least 4-5 cm
3. Wrap the left edge of the tape around the fork and get in advance, sticking it between the middle teeth
4. It turned out a loop. Without tightening this loop, stick the end of the tape, but already on top of the fork between the teeth
5. Make the end of the tape into the loop from the bottom and tighten
6. Remove the bow from the fork and cut the excess tape along the edges
7. Burn the cut ends of the tape with fire (lighter or match) so that the tape does not crumble. Such bows can be done as much as necessary - quickly and easy

More detailed instructions on how to make a bow with a fork and thin tape can be seen in the next video.

Video: How to make a cute bow from a satin tape and a regular fork in 2 minutes?

How to make a bow from a narrow tape?

Such an elegant accessory can decorate a gift, clothing item, table setting or even hair. An elegant and magnificent bow is obtained from the thin tape. How to make a bow from a narrow tape?

Full the following stages:

1. Prepare a narrow tape of two colors and cut a circle of 2 cm from cardboard with a cardboard
2. It is necessary to cut the tape into segments 5-7 cm.
3. Now apply a drop of glue to a cardboard circle with a glue gun and glue the edge of one of the segments of the tape. After 0.5 cm, apply a drop of glue again and glue the second end of the tape
4. Between the glued ends of the tape, apply glue again and glue the end of the tape of a different color. Glue its second edge next to the edge of the tape, which was glued before
5. Repeat so until several rows of such turns are pasted. The last 2-3 rows can be made smaller, and attach a bead or rhinestones in the middle

Important: when you glue the segments of the tape, thread each end through the previous round. Thanks to this reception, the bow will turn out lush and beautiful.

A good example of how to make such a bow can be seen in the following video.

Video: lush bow from narrow satin tape / kanzashi master class

How to make a bow to your hair?

Do -it -yourself bow to decorate the hairstyle is original and beautiful. You can be sure that only you will have such a decoration.

How to make a bow to your hair? Follow the following steps:

1. Prepare 2 segments of a tape 5 cm wide and 25 cm long, and a thin tape for the middle
2. Take one segment of the tape and bend the corner at one end
3. Fold the second edge with a corner near the first folded end. Then bend the resulting corners to each other. Fix the folded round with a needle
4. Now next to the folded corners, make another round and fix it with a needle
5. As if turning the resulting product, make a corner again to get the "rhombus". Do this until one small triangle of the tape is left
6. Fold the "rhombus" in half, and once again in half. Now you need to fold the remaining edge of the tape. The result was a triangle
7. Keep him by the center so that everything that we fold is not opened. Remove all the needles
8. Bend the internal triangle to the center to get the original "petal"
9. Fixed with a needle and thread in the place where you hold your fingers
10. Such details need to be made two pieces
11. Sew these details and bandage in the middle with a thin tape
12. Sew this bow to the elastic band or glue it to a hairpin, and a unique hair accessory is ready

Detailed instructions are in the video, thanks to which it will be easier for you to make a beautiful hair bow.

Video: MK - how to make a hair bow from a satin tape?

How to make a bow from a kapron tape?

If your daughter goes to first grade, then she should have the most beautiful and magnificent bows. How to make a bow from a kapron tape?

Making a magnificent and beautiful bow is simple. If the store does not have a tape, you need width, instead of it you can use a piece from an organza.

To make a bow, perform such step -by -step actions:

1. Prepare two tapes 7.5 cm wide and 140 cm long
2. Fold it in length in half. Now stripped the folded edge on a thread with a needle
3. When the whole tape is stitched, pull the thread until the strip turns into a product 40 cm long
4. Fix the thread and straighten the product along the entire length
5. Do the same with the second tape
6. Cut the circle of felt or from a dense tape with a diameter of 7.5 cm
7. Make two holes in a circle, and insert a thin tape or a banter in them in them
8. Apply glue along the edge of the base and glue the first chosen tape
9. We continue to smear the base with glue and glue the tape along the spiral. When the first tape is over, continue to stick the second tape thus
10. Когда останется немного места на основе, отрежьте лишнюю ленту и закрепите нитку
11. Stick the entire tape, smearing the base in the middle. Do not forget to cauterize the edges of the tape so that it does not crumble

See how it needs to be done in the video.

Video: Lush Bant from Organza. Master Class

How to make a bow of paper tape?

A paper bow can effectively decorate the gift box or table setting. How to make a bow of paper tape?

Performing a paper bow in stages:

1. Prepare 12 segments of the tape 2 cm wide and 25 cm long, and one tape 5 cm long for the middle
2. Start folding large segments "eight", as shown in the figure. The edges can be fastened with a stapler or glued with a heat mile. Stuff a small tape to get a ring
3. When all the details are ready, start collecting a bow, beautifully placing turns and gluing among themselves
4. The smallest turn is glued in the middle
5. On the reverse side, using a stapler, attach a thin braid or the same tape that was used to create a bow

The master class of manufacturing such an accessory can be seen in the video.

Video: DIY Gift Bant

You can make a paper bow and differently, as shown below.

In this method, the tape is not cut into segments, but is folded with “eights” into a single design. In the middle, the flower is bandaged with a thin paper tape.

How to make a bow from the tape for discharge?

When a newborn write out from the hospital - This is an important event, and everything should be flawless. Therefore, a bow for an envelope of a newborn can be done with your own hands. How to make a bow from the tape for discharge?

Tip: Choose a beautiful tape, for example, with gold edges, so that the flower turns out to be elegant.

Performing in stages:

1. Make segments from pink or blue satin tape, tape with gold edges of the same colors, ordinary satin thin tape and braid with a pattern
2. Start collecting a flower with a segment from a wide satin tape. Turn the tape in half and go with a thread with a needle. Also do with all satin segments, collecting them together in a circle. At the end, fix the thread
3. In the same way, collect all the ribbons. It should turn out 4 flowers
4. Apply thermocles to the felt base and begin to glue the flowers, first large, then in descending
5. In the middle, make the petals from a thin braid with a pattern, pre -gluing the edges of the segments of this braid
6. The last stage is the gluing of beads or rhinestones. Ban is ready

See how the girl in the master class in the following video does it

Video: Bant for discharge from the hospital. Master class from tapes

It is not difficult to learn how to make such bows with your own hands, and when there is a lot of experience, you can even make money on this type of needlework. For example, you can decorate banquet halls or create accessories for costumes and hair.

Video: How to make a tape bow made of tape?