DIY carnival costume for a boy: Instructions, photo

Sewing a carnival costume flashlight for a boy with your own hands is simple. Look for instructions in the article.

Content

Soon the carnival and your baby participates in it, but there is no suit? Do not be discouraged, your fantasy, a little skills, necessary materials, patience and, of course, helping the child, will make the process of creating a costume unforgettable to all participants.

Want to sew a carnival costume of a cheerful tiger –◄ Follow the instructions in the article on the link and you will be able to make an interesting outfit for your son.

In this article we will consider two options for making a costume "Torch" For a boy with your own hands. Read further.

How to sew a carnival costume for a boy with your own hands-yellow-green flashlight: instructions, photo

The carnival costume for the boy is a yellow-green flashlight consists of the following elements:

Hats
Jacket
Pants

DIY carnival costume for a boy-yellow-green flashlight

Here are the instructions on how to sew such an outfit with your own hands with a photo. For manufacture you will need:

Fabric: yellow and green. It is better to purchase an atlas or satin, since from synthetic fabrics in a child can be irritation on the skin and synthetic tissue is “poured”, that is, it has a cut of the cut out when cutting and sewing. With width of the fabric 150 cmTake green fabric - 100 cm, and yellow - 50 cm
Satin tape - yellow, width 3 cm, length 3 m
Decorative cord - green with gold thread, length - 3 m
Clasp-lightning-green or yellow, length-25-30 cm. At the discretion
Elastic gum- green or white, width 2-3 cm, length- 40-50 cm

Tools:

Big scissors
Chalk or pencil
Soft centimeter
Ruler -40-50 cm
Pins for riding parts-40-50 pcs.
Threads - yellow, green, white - 1 coil
Compass
Notebook
Glue gun
Acrylic paint yellow and green
Brush
Sewing machine

Step-by-step instruction:

So that you succeed well, you need to remove the measurements from the child. Measure with a centimeter and write the measurements in a notebook with a column:

Waist
The volume of the hips
The length of the trousers - from the waist to the ankle
The length of the gear (shelves) - from the shoulder to the hips line
Back length - from shoulder to hips
Sleeve length - from shoulder to wrist, bending the hand at the elbow

Make a pattern according to the presented drawing of cardboard, watman or newspaper. If this is difficult to do for you, put a long sleeve t -shirt or a jacket, folding in half along the length, and circle with a pencil on the Whatman. Do it with trousers too. You will get patterns, cut them with scissors.

Pants (trousers) Swate like this:

Take a pattern of pants.
Mark the ruler or centimeter from the waist line, slightly above the middle and draw a line.
Cut the upper part of the pattern from the lower part with scissors.
Top part:fold the green fabric in the wrong side in the edge in half, attach and circle the upper part of the pants (front and back). Return from the resulting line by centimeter and cut the fabric. You should get two details of the program and two parts of the back of the pants.
Bottom part: We also fold the yellow fabric in the wrong side in half, put on top and circle the pattern of the lower part of the pants. Having retreated a centimeter from the line, we cut out along the perimeter of the pattern.
With pins, we roll all the details at the seams. You can carefully, so as not to prick, try on pants for the child. If there is no such possibility, then attach them to the trousers, compare at the seams. If everything turned out correctly, build, first, the upper and lower parts (green and yellow), and then the front and back of the trousers. Turn the bottom of the trousers and set up. Do not forget to remove all the pins.
By your standards recorded in a notebook, measure the length of the waist on an elastic elastic band, retreat 3-4 cm, for stretching, cut. Add both ends.
Pin on the waist line to one seam of the trousers, fold the elastic in half, attach the elastic to another seam in this place.
You 4 details pants, 4 seam, attach an elastic band to them with pins.
On the sewing machine, turn on the Sigzag Stoop and add the elastic band, stretching it with a line. Pants are almost ready.

Jacket (blouse):

On a jacket, you need to make a coquer. On the pattern of the front and back shelves measure 10 cm From the line of the shoulder down, draw a line and cut the upper one from the lower part.
The upper part of the jacket: from green fabric, folded by the wrong side, we cut 1 detail, folded in half, gear coquetr and 2 details The backs of the back. We retreat from the line to a centimeter and cut out.
The lower part of the jacket: From the yellow fabric, folded on the wrong side, by the pattern, circle the lower part of the gear and back, retreat from the line a centimeter and cut it out. The result was one part of the program, folded in half and two parts of the back.
Close the upper with pins (coquet) and the lower part of the gear, and then parts of the back. After that, collect the front of the jacket and back along the shoulder line and on the side seams. Gently try on the child or attach to his blouse. Seam and process the seams on a sewing machine, pin up the backs with pins and stimulate the zipper.
Sleeve: Divide the sleeves into three parts, as shown in the figure. Cut out of green fabric, top and bottom, sleeves, and from yellow - the middle part. Scot with pins, and then stitch on a sewing machine, treat the seams with a zigzag.
Pin the upper part of each sleeve to the shoulder seam, connect the lower part of the jacket of the jacket and sleeve. Wet the sleeve with a needle with a thread manually. Seam, process the seams.
"Flashlight" on the sleeve: Take it 2 m Satin tape, fold in half and build along the edges. Cut the tape in size of the yellow insert on the sleeve, plus 7-10 cm. On the sleeve, measure the length of the upper and lower seam of the yellow insert, set the length on the decorative lace, cut. Pill the cut pieces of green tape at a distance of 1cm from each other to the cord. Sew the ribbons to the cord or glue it with an adhesive gun. Also attach the finished flashlights to the sleeves of the jacket.
Finishing: Sew a decorative cord to the seams at the junction of green tissue with yellow. Also attach the cord with a cross to the costume details, as shown in the figure. For attaching to the cord tissue, you can use an adhesive gun.

Hat:

Hat rim: Draw a line equal to the volume of the child’s head on the cardboard. Put down down 3 cm And spend another line. Cut the rim.
The main part of the hat: stepping back from the corner of the cardboard, conduct a circle with a circuit, radius 20 cm. Put an end to the circle, put it off from it 7 cm. Combine both points with the center. Cut, glue, get a cone.
At the inside of the cone, attach the rim using an adhesive gun or painting tape.
Paint the upper part of the hat in two layers with acrylic paint, the lower part and the rim - yellow.
To the top of the cone, you can glue a metal ring or ring from the cord. On the edge of the hat, you can also glue a decorative cord, the suit is supplemented with a luminous stick or a flashlight, shiny beads and bracelets.

In the process of making a costume, use the help of a child, offering to cut off a tape or cord in the right place. Also put a cross with a cross on pants and a jacket, determine the size of the elastic band by tightening it at the waist. Let your baby help and measure the elements of the costume during sewing. Making a suit with a child will create a good mood, will allow the baby to do a feasible work, which will be proud of, which means that he will perform confidently on the matinee - the best.

Carnival costume flashlight for a boy with your own hands of red-yellow color: instructions, photo

Carnival costume flashlight for a boy with your own hands red-yellow color

Preparation for a carnival is a wonderful opportunity to show your creative abilities. Torch Be sure to burn, which means that the red-yellow lantern will be the most striking, the most noticeable and your child will be irresistible in it. Such a carnival costume for a boy consists of such things:

Overalls
Balakhon cape
A cap

Textile:

For the manufacture of a suit, you will need a bright, shiny fabric. It can be an atlas, silk, satin, velor red and yellow 1 m 50 cm Everyone.
To give stiffness, a hoodie - a hoodie needs any dense material.

Elastic:

Ordinary white elastic band - 1m.

Classes:

For fastening the suit, you can use zipper, buttons, hooks, Velcro, buttons or bows from a ribbon.

Finishing:

A beautiful gold or silver braid is suitable, small shiny fringe (when moving, combustion effect will be created)
Sequins
Decorative pebbles - any decoration at your discretion

Tools:

Big scissors
Chalk or pencil
Centimeter
Pins-40-50 pcs
Sewing threads - yellow and red
Compass
Glue gun
Sewing machine

Here is an instruction that will help sew a suit with your own hands. Progress:

Overalls:

Start working with the manufacture of the pattern.
Measure the length of the jumpsuit with a centimeter from the child’s shoulder to the ankle, write down the measurement on the leaf. If the length allows, then the pattern can be performed on a sheet of Whatman. If not, use old wallpapers.

Draw the pattern from the proposed drawing, checking with the standards removed from the child: the waist volume, the volume of the hips, the length of the front and back of the overalls, with the mark of the shelf and the back from the shoulder to the waist. Do not forget to measure the length and width of the sleeve. Cut all the details of the patterns.
Disable yellow fabric on the table along the shared thread (along the edge), fold along the length, inside.
On top, lay out the pattern of the front of the product, circle with chalk or pencil. Check with the standards of the child and if you need to correct the drawing. In the same way, perform a drawing of the back of the overalls.
Gently so that the fabric does not move, cut all the details, be sure to retreat from the edge of the drawing line.
Smam (sew), or skille with pins, two parts of the gear, then, the back of the overalls. Do not forget to leave your free back to then sew fasteners to it.
Be sure to make an fitting for a child. The overalls can be measured by the wrong side so that, if necessary, to cross the pins in the right place and they will not be injected.
Stitch all the seams on the sewing machine, remove the wrap or pins.
Combine the seams of the sleeves, sew.
Once again, put the overalls on the child, attach the sleeves. Add your sleeves.
Turn out the product, sweep all the seams.
Lay out on the table, draw the waist line with a pencil, retreat 7-8 cm Draw a line from the bottom of the sleeve, also do it with the trousers.
Power the edge of the elastic band to one of the seams on the waist line and set it up with a zigzag seam, slightly stretching with a line. Repeat this manipulation on the sleeves and trousers.
Sew a zipper or any fastener.
Turn your sleeves and trousers, you can stimulate golden braid.

Balakhon cape "flashlight". You will need red fabric. Do this:

Measure the volume of the child’s head so that the child can freely put on a cape-balcony through her.
Lay the dense tissue-seal on the table, draw a circle equal to the circumference of the child’s head, plus two centimeters ( 15-20 cm).
Step back five centimeters, draw another circle. Cut circles. From this ring, make two more red fabric to put your head from above and below ( 35-40 cm).
Fix the rings with pins so that they do not move. The inner circle (neck) is filled with braid. The “flashlight” coquette is ready.
By the measurement of the hips, cut the strip of dense fabric, width 4-5 cm. Cut the strip of the same length from the red fabric, put the seal, fix it.
Cut the fabric with strips wide 6-7 cm, combine two, can be sheathed along the edge of a shiny braid.
Pin one edge of the stripes along the outer circle of the coquet. Another, to the belt that you did.
Add, coal with braid.

Hat:

It can be performed according to the description of the previous costume, only painted red.
From the fabric you can also make a headdress. To determine the size, take a large plate, attach the boy’s head to the crown. The size of the plate should be slightly larger than the volume of the head.
Use dense fabric for sealing so that the hat holds the shape. Circle the plate along the edge on dense fabric and on red fabric, connect them. By the drawing, cut out the rest of the details.
Fold all the details and connect. In order for the hat to hold well, set up a piece of elastic band from the inside of the rim (behind).

The costume can be supplemented with a luminous flashlight, attached to the cake of the braking cape luminous balls. Open the designer-designer in yourself, believe me, you will succeed. A successful and interesting creative process!