How to knit female, male and children's socks on 2 knitting needles: a simple way for beginners with a detailed description, shov in front, without a seam, seam behind, from a mouse, a description scheme, video

How to knit female, male and children's socks on 2 knitting needles: a simple way for beginners with a detailed description, shov in front, without a seam, seam behind, from a mouse, a description scheme, video

This article will teach you how to knit socks on 2 knitting needles. It's simple, follow the instructions and you will succeed.

If you have only 2 knitting knitting needles in your house, then you can knit socks - beautiful, stylish. The process of such knitting is very simple and even a beginner craftswoman will be able to master the technique.

  • Previously, for knitting socks, needlewoman used 5 spokes, and it was difficult for many, especially for beginners.
  • Now there are enough 2 knitting needles and after half an hour you will have a couple of socks.
  • Below there are schemes with a description for knitting products in different ways on two knitting needles.
  • Therefore, you can learn to knit socks - fast and simple. Read further.

How to knit socks on 2 knitting needles: a simple way for beginners, a diagram with a detailed description

This knitting technology has appeared recently. It is very simple - this is a classic knitting method, which is available even for beginners. The socks will turn out in the end very convenient, comfortable and neat in appearance. The product consists of only 4 parts that are knitted one after another-sequentially.

Four parts of the product are knitted with a single canvas on two knitting needles
Four parts of the product are knitted with a single canvas on two knitting needles

Here is a scheme for building a knitting product. You will find a detailed description of this scheme below.

Schematic image of sock parts
Schematic image of sock parts
Write down the parameters of the leg to knit socks on two knitting needles
Write down the parameters of the leg to knit socks on two knitting needles

First, remove 3 measurements: the size of the leg (measured on the foot), the height of the rise, the height of the sock itself.

When all the measurements are removed, you can start work:

  • First prepare the back of the elastic band.
  • For 2 knitting needles, dial 22 Petes.
  • Stitch 4 cm with a pattern “Glastic 1x1”. Alternate the front Pet. With the wrong side.
The back side of the cuff - elastic bands
The back of the cuff is elastic bands
  • Now you can change the color of the thread or continue to knit the same yarn as they knitted the elastic band. Stitch 4 cm with the front surface.
  • It turned out the back of the sock.
Knit another 4 cm with facial loops
Knit another 4 cm with facial loops

Continue knitting. The queue of creating the heel came:

  • Knit with the front stitch and reduce the 2nd, 3rd and 2nd of the penultimate loops in each row.
  • When there are 12 Petes, stop reducing.
  • Now you need to add loops to increase the size of the knitting canvas.
Figging heels
Figging heels
  • Knit the next row by adding a loop from the edge of the previous row.
  • As a result, you should have 22 Petes again. In a row. It will be the bottom of the heel.

The line of knitting the sole came:

  • Knit with a front surface of 8-9 cm. This is 37-38 leg size. If your leg size is larger, then add another 0.5-1 cm.
  • Now you have a part of the cuff, heel and sole.
The process of knitting the sole
The process of knitting the sole

Start the knitting of the toe:

  • Knit the same way as the heel, reducing up to 12 loops.
  • Then again add from the edge to the initial number.
The process of knitting the top of the product
The process of knitting the top of the product
  • Knit the top of the toe approximately 8 cm.
  • In each front row, connect the first and last Petes. With the edge.
  • The sole and top will be connected, and the knitting will acquire a complete look.
  • Now, in the front of the ascent, knit with the front surface. Connect the rise with the back of the product as well as the top with the bottom.
  • Then knit 4 cm of elastic bands.
The process of knitting the front of the elastic band
The process of knitting the front of the elastic band

The product is ready. Similarly, tie a couple of products. After that, you can wear and wear socks created by yourself - simple, warm and beautiful.

The product is ready
The product is ready

Of course, if you are just starting to learn to knit, then you will spend more time than experienced craftswomen. But, having tied one pair of socks, you will understand how simple it is and the second pair will be possible to create much faster. When you gain experience in the simplest knitting of socks, you can try to attach different ornaments and patterns, as in descriptions below.

Socks on 2 knitting needles - front seam: scheme and description of knitting

This knitting style is suitable for those needlewomen who do not like to knit socks on 5 knitting needles. In addition, it is more convenient to create ornaments and drawings on two knitting needles. You will get a whole canvas, which then you need to sew on the front of the sock - simply and quickly.

So, get to work. Prepare the threads of any colors, you can several balls that you have left from the previous knitting, you can only 2 or 3 balls. Here is a knitting scheme:

Schematic image of a pattern for knitting a toe
Schematic image of a pattern for knitting a toe

We will use threads of three contrasting colors to create an interesting ornament.

Prepare the thread for knitting the sock
Prepare the thread for knitting the sock

Do the work like this:

  • Type 50 loops on two knitting needles.
  • Tie the cuff with a pattern "Gum 1x1". The height of such a knit is not more than 8 cm.
  • The ornament will be simple, but in order not to get confused and do everything right, use the scheme that is indicated above in the text.
Tie the elastic band and begin to bind the pattern
Tie the elastic band and begin to bind the pattern
  • In the first and second row, ornaments every three green loops are knitted with a yellow loop.
  • Then, on the contrary, every three yellow loops are one - green.
  • Then the combination of yellow and white (repetition, as with green and yellow threads), and white and green. The ornament begins with one colored loop every 3 green loops and also ends - 3 green loops, 1 loop of white color.

After you knit one pattern, you will understand how simple it is and it is easy to create it. We continue:

  • Divide all loops into 3 parts: 2 - on the sides of 10 loops and 1 part - 30 loops - this is a heel.
  • Put the side parts on the knitting needles or collect on the pin and so far leave, and knit only part in the middle - the heel.
  • Knit 5 cm in height with the “Gum 1x1” pattern.
  • Then you need to create a bend on the heel from below. To do this, divide the loops into 3 parts: 10 - on the sides and 1 part - in the middle.
  • Knit the central ten loops with an elastic band, capturing the latter and knitting it along with the first loop from the part, which is located on the side. The knitting technique in this way is the same as when knitting the toe on 5 knitting needles.
The heel on 2 knitting needles is knitted, as when creating a toe on 5 knitting needles
The heel on 2 knitting needles is knitted, as when creating a toe on 5 knitting needles
  • After knitting the heel, you should get 30 loops in total: 10 from sides and 10 - in the middle.
  • Now add 7 loops along the edge of the heel. This is necessary in order for the product to fit the leg well. As a result, you should have 44 loops.
  • Now again came the turn of knitting the pattern. Depending on the parameters of the foot, the number of patterns can be different. For example, for the size of the legs 36-37 size-3 patterns, 37-38-4 patterns and so on. The main thing is to knit the pattern completely, do not break it. It's okay if the sock is 0.5-0.7 mm more-this is not critical.
Again knit an ornament that will be located on the sole
Again knit an ornament that will be located on the sole
  • The line of narrowing of the canvas came. Little by little reduce the loops evenly: knit every 5 loop together.
  • On the fourth row of such knitting, exactly 10 loops should remain.
  • Now close the loops - it turned out a toe.
  • The center needs to be sewn - this seam will turn out in front.
Sew the product in the center
Sew the product in the center
  • The seam will look like part of the ornament. It is almost invisible. By analogy, tie the second sock.
Lay out the second toe similarly
Lay out the second toe similarly
  • Now you can wear these beautiful socks, with interesting ornaments and related by unique, but simple technology.

Watch the video how the craftswoman creates a couple of socks in just half an hour. One seam - in front and the whole product is ready.

Video: socks with one seam on two knitting needles (1st option)

Socks on 2 knitting needles: seam in the back

Such socks are original and beautiful. They look beautiful and interesting on the leg. They can be knitted with both a plain thread, and combining different colors (remains from another knitting) creating a unique ornament.

Knitted product with a seam in the back
Knitted product with a seam in the back
  • First dial 49 loops on knitting needles No. 3.
  • Stitch with an elastic band (1x1).
  • Find the middle and mark with a marker or just a thread of another contrasting color.
  • Now in each facial row from the middle, knit 5 loops: facial, united, facial, united, facial.
  • Knit the wrong rows, as the knitting requires this, that is, by the picture.
  • When you get 97 loops on the knitting needle, knit another 6 row with the front surface.
  • Now tie the sole on 13 loops, as the heel is knitted on 5 knitting needles.
  • Sew the knitting canvas behind. All - socks are ready.

Advice: Do not tie 6 loops, reducing the average 3 loops on the sole in each facial row. How 1 loop remains, do not sew a needle like behind, but simply connect with knitting needles, knitting like a border on other products. Be sure to reduce one loop every 5 rows on the sides.

Watch in the video how the craftswoman knit socks with the seam from behind. It turns out very interesting and simple. If you did not understand something in the description, then you can watch the video and answer for yourself all the questions in the process of work.

Video: socks with one seam on two knitting needles (2nd version)

How to knit socks on 2 knitting needles: a simple way without a seam, a description scheme

Socks-cuts, tied in a simple way on 2 knitting needles without a seam
Socks-cuts, tied in a simple way on 2 knitting needles without a seam

Above, we have already described the sock knitting technique without a seam. Now we offer to connect beautiful socks without a seam, but with a decorative fastener on buttons. Believe me, there are no such socks, you will not see anyone. This product can be tied to yourself or for a gift. Knitting technology is simple, despite the fact that you will have to create a pattern and a bar for fasteners.

First prepare the necessary materials for work:

  • Any yarn can be any, but it is better to acryle in half with wool. Such socks will keep shape well and will remain beautiful even after several washes. 100 grams of such yarn is enough.
  • Buttons in the tone of the yarn are 6 pieces.
  • Kits of two types: flexible and circular - No. 3.
  • Needle and threads for sewing buttons.

Here is a knitting pattern of such socks:

Schematic image of knitting a picture
Schematic image of knitting a picture

When all the materials are prepared and studied the work scheme, you can start the knitting process:

  • If the thread is thin and in a 50-gram coil is about 300-350 meters, then knit in two threads. In two threads you need to knit and if the yarn is thick, because it is socks-sapers. They should turn out to be warm and should keep their shape well.
  • Take 33 loops on knitting needles with a flexible fishing line. Knit a couple of centimeters with a panting viscous.
  • Then, we will only have only 3 first and 3 last loops with a patch. Hind the rest of the pattern according to the schematic image.
  • The cuffs along the length should be equal to the foot cover - from 25 to 27 centimeters.
First tie the elastic band and the top of the product
First tie the elastic band and the top of the product
  • The cuff must be finished just as they started - knit 2 centimeters with a pantyer knit.
  • Do not forget to make holes for buttons: close the loop on the front side, and add on the wrong side.
  • Now tie the foot. In the central part of the upper half of the already knitted canvas, dial 11 loops.
  • Knit the center of the sole with straight and reverse rows. The length is not more than 11 centimeters.
Now proceed to knit the side of the product
Now proceed to knit the side of the product
  • Then you need knitting needles with a flexible fishing line. Take the rest of the loops on the upper part of the sole and 11 loops in the center. Get on the side (at the junction, without touching the first 3 loops).
  • Stitch with a gastard viscous three centimeters.
  • Now you need to sew the first and last loops. Also attach the cuff bottom, but overlap - 2 centimeters. How to do this correctly, look in the picture below.
Sew as shown in the picture
Sew as shown in the picture
  • Now you need to tie the lower part of the sole. Take 9 loops in the center from the side of the heel on an ordinary knitting needle.
  • Those loops that remain, string on knitting needles with a flexible ribbon. Look at the picture below.
  • The sole must be knitted with shortened rows on the hinges in the middle.
  • In the center, make the number of loops equal to 13.
  • Remove the first loop, 11 Pet. - Facial, knit the last loops together with the faces.
Enter the sole
Enter the sole
  • At this moment, you need to turn the work. Then one Pet. Remove, 11 - knit with facial loops, the last loop and loop on the knitting needle near (with a fishing line) knit the faces together. loop.
  • Continue to knit until there are 7 loops left on the knitting needles with a fishing line.
  • Next, knit 2 p. From an ordinary knitting needle and one loop from a knitting needle with a fishing line so that all the loops are gradually closed.
Sew buttons - the product is ready
Sew buttons - the product is ready
  • Everything - the toe is ready. Sew the buttons.
  • Knit the second toe similarly to the first.

Products related to this technique are beautifully fitting and have a stylish and interesting appearance.

We knit socks on 2 knitting needles: a simple way from a toe, a description scheme, video

A product connected by a simple way from the mouse
A product connected by a simple way from the mouse

Another simple way to create socks by knitting is starting from a toe, moving to the cuff. This knitting technique has long been known to everyone, but not every craftswoman knows about the use of an additional thread. However, everything is in order:

  • First, tie the thread of the main yarn and any nylon thread (length 35 cm) with a knot.
  • Calculate the number of loops according to the parameters of the leg. Measure the length of the circumference of the leg and divide by 3 (if the thread is thicker) or by 4 (if the thread is thin).
  • Do not tighten the hinges in the front row, so that later there are no problems with the backing for knitting the second row.
  • Now dial half of the resulting loops after your calculation. For example, you got 48 loops, then dial - 24. Look below in the picture how it should turn out: the loops are created using the main thread, and the additional (black) is a fixer at the bottom of the knit.
Take loops with an additional thread
Take loops with an additional thread
  • When all 24 loops are scored, tie the 1st row with the front stitch, and the 2nd is the wrong side. Do not touch the last loop, you do not need to knit it.
  • Turn the work and knit your faces again. Pet. The last loops in each row are left untouched.
  • As a result, in each row it will be knitted on one Pet. less. Knit so until you have 8 Petes.
8 loops should remain
8 loops should remain
  • Now start adding the loops. Those Pet. That were previously removed, knit in turn in every row.
  • If you get too large holes due to elongated Petes., Then use this method: Raise the side Peter on the left knitting needle., Bind it together on the left knitting needle. Then these loops are knitted: in faces. row - facial, and in the inside. - The wrong ones.
  • Knit so until all the loops are in work again and you will not get a toe, as in the picture below.
The mouse is ready
The mouse is ready
  • Then work with the loops that were fixed additional. Black in black. Take the first Pete on the knitting room. With additional. thread and transfer one Pete. From the left knitting needle to the right.
  • Do this until you have all loops to your right knitting needle. Now you can remove additional. thread.
Remove the additional thread
Remove the additional thread
  • Then knit as follows: 1 persons. Pet., Remove 1 loop, and get the thread in front of the loop. Again 1 persons. Pet. and 1 removed. So do it until the end of the row. Knit the last loop with the front.
  • Remove the 1st Pet. next row, tie 1 persons., 1 out. And repeat again until the end of the row.
  • As a result, it turns out that you tie in one row half of the loops, and in the other - the other half. A whole -glass canvas in the form of a tube should be obtained. So you need to knit the length of the equal length of your sole.
Knit the sole
Knit the sole
  • The turn of knitting the heel came: remove the loops for add. A needle through one. On those who stayed, tie the heel just as they knitted the mouse.
  • First, go to reduce the loops, moving gradually - 1 loop in each row. A third of the shafts from the total number should remain.
  • Then add the loops to get as much as it was to be reduced.
The process of knitting the heel
The process of knitting the heel
  • As a result, you should get a canvas, already similar to a toe - with a toe and a heel.
Mouse, heel and sole are ready
Mouse, heel and sole are ready
  • Now transfer all the loops to one knitting needle. Alternately knit 1 persons. Pet. From one knitting needle, and removing 1 Pet. With a thread before work with another knitting needle.
  • Bring the “pipe” again, as you knitted the sole. So do so on the height of the sock on the ankle, but so far without an elastic band.
  • The elastic band is knitted according to the 1x1 scheme, the length is not more than 8-10 cm.
  • Everything - the toe is ready. Similarly, make a second sock.
The product is ready
The product is ready

Children's socks can be knitted according to any of the described methods. The main thing is to choose bright yarn so that the baby is interested in wearing products, and correctly calculate the sock parameters. The same with socks for men: choose yarn in dark colors and correctly calculate the size of the sock. The calculation formulas are described above in the text.

Baby toe created by yourself
Baby toe created by yourself

Choose any of the above methods and knit socks to yourself and your loved ones. A simple knitting technique will create a couple of beautiful and stylish socks with your own hands. Good luck!

Video: Knitting with two knitting needles of the simplest children's socks!



Author:
Evaluate the article

Add a comment

Your e-mail will not be published. Mandatory fields are marked *