How to make a pedicure at home gel polish? How to make a pedicure gel polish to yourself?

Instructions for applying pedicure gel polish to itself.

Content

Pedicure is the necessary manipulation for beauties that monitor their appearance. Recently, it has become quite popular to cover the nails with gel polish, which is carried out not only on the arms, but also on the legs. This allows you to significantly extend the socks of the coating, and make the nails perfectly even and beautiful. We will tell you how to make a pedicure gel polish to yourself.

How to make a pedicure gel polish: processing stop

Many girls know that the pedicure procedure with nails with gel polish is expensive. The price can increase significantly, depending on the complexity of the design and condition of the nail plate. Now many masters are engaged not only in hygienic pedicure, but also by the restoration of the nail plate. After all, modern materials, such as solid gels, Fayber-gel, and alsoacrylate allow you to increase and prosthetize the nail plate in case of damage.

This gives a second chance to those people who underwent surgery to remove a growing nail, or suffering from fungal ailments, onycholysis. Thanks to new modern materials, it is possible to make aesthetic pedicure, which hides all the disadvantages of the nail plate. Read more about the prosthetics of nails and materials used for this, you can find here.

How to make a pedicure gel polish:

If everything is in order with the nails, there are no broken corners, you can proceed to the pedicure. The most initial stage is the removal of coarse skin and corns. There are several options for the implementation of this procedure.
The simplest for home users is a classic pedicure, during which the feet are soaked in water with soap for 15 minutes. After softening the skin and cuticles, everything is cut off using tweezers or scissors with bent blades. The processing of heels can be carried out using a special machine with blades, or a file.
The file is suitable if the heels are not coarse, and a lot of skin is growing on them. However, in the summer, when the beach season is in full swing, the skin on the heels is very quickly rude, even among those who do not face thick and dense heels.
In this case, it is best to use keratolytics and a special gel for softening of coarse skin. Acidly have shown themselves acidic products and gels based on fruit acids.
They are applied with a brush to the entire foot, including in the area of \u200b\u200bcuticle and corns, heels and withstand for 5-10 minutes. After that, the legs are soaked for 15 minutes in warm water, and loaded skin is removed using a file, orange sticks and tongs.

How to make a pedicure at home gel polish: handle and nail processing

Thanks to keratolytic, the phergy softens perfectly, it can easily be removed using an orange stick or cannon.

How to make a pedicure at home gel polish:

After the corns and feet are treated, it is necessary to proceed with the processing of the fingers. Before applying gel polish, it is imperative to remove phergy, as well as the cuticle. If you do not use acidic products, then you can remove and process this zone using the device.
For these purposes, you should use a regular cheap handle, which can be purchased for Aliexpress. At the initial stage, with the help of a ceramic milling cutter, the old material is removed to the thin substrate of the base.
After that, the nails are treated for removal of phergy. This manipulation is best done with the help of corundum truncated cone. The phrase is pleased soft, but excellent allows you to remove the cuticle sticking to the nail, and raise it for further removal.
Indeed, in the nails on the legs there can be a huge amount of cuticle, which is coarse dry skin that needs to be removed. Afterphergy It will be removed using the corundum cone, you can start working in sinuses and side rollers.

How to make yourself a pedicure gel-lacker: removal of the cuticle

To do this, it is best to use a cutter of flame, which is deeply selected in the side rollers, and the area of \u200b\u200bsinuses. Remember, unlike manicure, there is no nails on the legs under the legscutile Space, therefore, manipulation must be performed with minimal pressure.

How to make yourself a pedicure with gel polish:

Indeed, even with a weak press on the cutter, you can carry out a cut or undermine the nail, as a result of everything you get bleeding. In no case do not try to climb under the cuticle. There is no this space on the legs.
With a milling flame, they try to remove only a small amountpERGIA And remove small scales in the area of \u200b\u200bsinuses, side rollers. As soon as the cuticle is raised, it can be cut off using a scissors orcutile Schipchikov. If you perform a hardware pedicure, then it is best to use a fire cutter.
It can be with a blue or red notch. Since in the nails on the legs there is a very dry skin, a large amount of it, it is best to use a ball with a blue notch. Remember that the speed of the cutter when processing nails with a cutter flame should be 15-20 thousand revolutions.
If the cuticle is removed using the ball, the rotation speed must be reduced to 7 thousand revolutions per minute.
After these manipulations, you can grind with the use of a soft silicone polisher using some kind of antiseptic, most often used AHD, or bacillol.
This allows you to remove small scales and residues of the skin, which is glued in the area of \u200b\u200bnails and side rollers. For better cleaning in sinuses and side rollers, you can moistenmicrorach alcohol and walk in these areas.

How to make a pedicure with gel polish: nail preparation and coating

After that, nail degreasing is carried out. If you used an acid solution before the manipulation, and withstanding your legs in water, the use is a prerequisitedehydratoras well as acidicpriramer. Indeed, when soaking, the nails are saturated with water, which can further lead to peeling gel polish.

How to make a pedicure with gel polish:

After processing, a thin, rubbing layer of the base is applied. Remember, in the area of \u200b\u200bthe nail plate on the legs is not aligned. This is due to the fact that most often the thickness of the nails on the legs is greater than on the hands, and does not require alignment.
Try to do it only in extreme cases, if you have a flat nail plate, refrain from applying a large amount of material. Artificial material exerts pressure on a natural nail, which in the future can lead to twisting the nail or its construction.
Therefore, be sure to remove the corners on your legs, try to fight growing nails. Many expertspodologists They do not recommend using gel polish on the legs, because it can lead to the appearance of corns in the linesvrost, as well as contribute to the appearance of a growing nail.
After you apply a thin layer of the base, you can start a decorative coating in the form of gel polish. Usually try to choose well -pigmented varnishes that are applied to one layer.
Remember, the smaller the material on the nails of the legs, the better. After you perform the design, the coating is overlapped with a top. Do not forget to seal the end, this will extend the period of socks of the pedicure. Remember that the optimal period of pedicure socks is 21 days.
It is such a period of time that developers and manufacturers of gel varnishes give a guarantee for their material. After that, the covalent bonds in the polymer coating are bursting, and gel polish can roll off the nails.

How to make a pedicure gel-varnish: tips

To facilitate the procedure for performing pedicure on the nails, you can use special spacers. itit prevents contact of nails with skin and with each other. Try to choose thick flower beds that can be applied immediately to all fingers on each leg. This will reduce time, as well as minimize the effects of ultraviolet rays on the skin. Ideas for fashionable pedicure 2019 can be found here.

How to make a pedicure gel polish, tips:

Try to choose the shape of nails that is ideal for you and do not cause discomfort. Now most women are in pursuit of beauty, so they seek to change their physiological data, including changing the shape of nails on their feet.
Yes, indeed, long -colored nails look much more beautiful, but in ladies with a short nail bed it is not recommended to grow too long nails.
During the sock of the closed shoes, the nails can rest against shoes, thereby provoking pain and pressure onmatrix. In the future, such nails can be twisted, or the fingers are deformed even.
In no case do not cut out all the corners deeply, because it can provoke bleeding or a nail. If you saw during the pedicure at the points of the linevrost A lot of scales and dry skin, which means that strong pressure is carried out in this area.
Get free shoes, and in these places try to cut your nails a little. In addition, reduce the amount of material applied, perhaps it is the gel polish that presses on the nail, provoking the formation of corns.

Materials for pedicure gel polish

Remember, an ideal option for performing gel polish on the legs is the use of a liquid base, as well as a top.

Materials for pedicure gel-varnish:

This is due to the fact that they are very quickly aligned, the thickness of the layer is minimal. This allows minimizing the pressure on the nail and to prevent the occurrence of coarseness under the nail, and also reduces the pressure on the nail plate. As a result of this, the likelihood of a growing nail, or a large amount of dry skin in the area of \u200b\u200bthe nails of the nails, is reduced.
Rubber base and top- this is Not the best option for applying to the feet. These materials are very well aligned, while they are thick enough, forming a thick layer.
Thus, such materials will exert strong pressure on the nail plate and space under it. Which in the future can lead to problems with the nails.
When performing prosthetics of the nail on the legs, try to apply the material only to the area in which there is no nail. In the area of \u200b\u200ba natural nail, try to reduce the thickness of the product at least.
This will reduce pressure on the nail bed. Usually the amount of material is reducedto nothing In the area of \u200b\u200bnatural nail. This can be done by stretching.

The ideal material for prosthetics on the legs isacrylate, or Fayber Gel, with a slight fiberglass content. They are quite strong, strong, so with their help you can make the nail very thin, but strong enough.