How to wash, clean, sharpen a grater for vegetables? How to wash a grater so as not to rust? How to clean the grater with apple, lemon, soda? Is it possible to clean the grater in the microwave?

Methods of cleaning, washing and sharpening graters for vegetables.

Content

Cleaning the grater at home is quite simple. The difficulty lies in the fact that the product quickly rusts, and if you wait a bit with cleaning, then the rest of the food dries. Therefore, it is quite difficult to clean. In this article, we will tell you how to clean the grater and return it to the original appearance again.

How to wash a grater so as not to rust?

Of course, the simplest option is immediately after work to load the product into a container with warm water and leave for several minutes.

Instructions:

You do not need to leave a grater for a long time, because many models are made of food tin, which over time can rust and even roll it out. Accordingly, there is no need to keep in water for a long time. 10 minutes are enough, if the remnants of the food are dried up, then it is necessary to add a few drops of the dishwasher to wash the dishes to the water. After this, the grater is extracted from the liquid and the cleaning begins. This can be done using a conventional food sponge.
If the pollution is not possible, you have just used kitchen utensils, in which case, you need to move in the direction of the location of the holes with a sponge. Not like you are a trip, but in the opposite direction. This is done in order to avoid cuts and damage to the hands.
On the reverse side, you can clean with a toothbrush. An old, unnecessary brush is taken and cleaning is performed, just as in the direction of the location of the holes. This is done if the pollution is strong and dried up, or a grater was performed on the smallest cells that resemble holes made with a nail. The fact is that such holes are very prickly, fibrous vegetables are usually greatly clogged in them.
Accordingly, cleaning the grater is quite problematic, it is best for these purposes to use an old toothbrush, a tool for washing dishes, a soft nylon brush is quite suitable, which brush the remnants of food, and removes them from hard -to -reach places. Please note that immediately after you have cleaned and washing the graters, you need to dry it in order to avoid corrosion. To do this, it is enough to put a grater on a towel or a paper cloth so that the remaining water of the glass and the corrosion process does not begin.

How to clean the grater with apple, lemon, soda?

You can also clean the grater with lemon, potatoes or baking soda. It is quite simple to do it.

Instructions:

After you have grown products with a grater, do not rush to immerse it in the water. Take the potatoes peeled from the peel, divide it in half and slices both from the back of the grater, and from the one on which the trip, only in the opposite direction, so that the potatoes do not grind, and its juice only covers the holes in the grater.
Thus, it turns out that starch, which is located directly in potatoes, carefully cleanses the product and prevents its corrosion. The same manipulation with lemon is carried out. It is cut into two parts or cut a slice.
You can use the already used lemon that you threw into tea. Pull the slice of tea and rub the inner and outer side of the grater with it in the same way, so that the lemon does not grind. That is, in the opposite direction.
After that, it is enough to rinse the product with warm water and dry.

Cleaning with soda:

If you have a grater that for many years and you want to return it to the original appearance, or particles of food have dried up, you can use soda. To do this, pour a little water into a metal bowl, add a teaspoon of soda and immerse the grater in the solution. Put a bowl on the fire and boil for 5 minutes. After such manipulations, even the small remains of rust and dark plaque will move away from the product and it will shine with initial cleanliness.
Please note that such manipulations cannot be repeated more often than once a month. Because the high temperature and aggressive substances can adversely affect the quality of the graters, and lead to its destruction.
If you have a very old, darkened, rusty grater that works poorly enough, we advise you to purchase a new one. This product is not so expensive, so you should not spend a huge amount of your free time. Perhaps after falling off from such a grater, pieces of tin will begin to fall off, which is associated with a long service life and its aging.

Is it possible to clean the grater in the microwave?

Many advise to perform such a manipulation using a microwave. To do this, you need to take a deep bowl, pour a little water into it, adding a dishwasher. After that, dip the grater so that the blade is directly in the water. Next, it is necessary to put the product of the microwave for several minutes. As a result of such manipulations, all the sugary food should quickly depart from the blades.

In fact, it is very difficult to predict how the tin grater in the microwave behaves. Most likely, the grater will begin to spark, as a result of this you will receive a non -working microwave. Accordingly, we cannot advise this method. After all, the grater costs an order of magnitude cheaper than the microwave, it is easier to buy a new one than to ruin an expensive household device.

How to extend the grater service life?

Adviсe:

To extend the grater service life, we recommend that you use it correctly, accordingly clean it after you have worked on it.
The remains of contaminants are removed much faster and easier. Only by placing in a container of water, food residues are easily removed with a sponge or a soft nylon brush, without additional friction, and the use of chemicals.
Please note that it is best to immediately dry the grater after washing. It should be placed on a soft, dry towel or a paper towel, so that the water does not accumulate, and evenly drains. This will prevent rust and damage on the surface of the product.

How to sharpen a grater with sandpaper and a file?

It happens that the grater is quickly stupid enough, but it looks pretty good, made of good steel, so it’s a pity to throw it away. In this case, we recommend sharpening it. The fact that the grater needs sharpening is indicated by difficulties in grinding products, and a decent effort that you have to make in order to make the products grated. For sharpening graters, you can use several methods. The simplest and fastest is sandpaper.

Sharpening methods:

Sandpaper. The ideal option is nulevka, that is, the smallest, with the size of grains 500. It is necessary to cut off a strip, a length that is 2 times larger than the width of the grater itself, and a width slightly exceeding the length of the row. Now it is necessary to drive away from the side with sandpaper, the grater directly in convexis. Thus, if you look from the end, it will be seen that these cells become much thinner, and sharper. After that, when all rows are sharpened, you can re -pass other sandpaper with a smaller grain size. Fighting is ideal for 1200. Thus, additional polishing is carried out. As a result of such manipulations, you will get a perfectly brilliant and smooth, as well as a sharp grater. Now it is necessary to protect your fingers so that they do not cut them in the process of grinding products.
You can sharpen graters with the help nadphers or special file. In this case, you will have to process each hole directly. It is necessary to enter the file directly into the hole and move it towards the top. Thus, the thickness of the metal itself will decrease. Accordingly, each hole is sharpened. This method is longer, because you will have to process each hole. If you have plenty of time and you want to work hard, you can use this method. When using this technique, very sharp holes are obtained.

As you can see, the easiest way to clean the graters immediately after work. This will simplify the removal of food residues and extend the life of the kitchen utensils.