How to clean the Teflon iron steam, with a ceramic coating from scale, soot and rust at home?

Is your iron covered with a solid plaque and ugly burning? However, do not despair! From our article you will learn how to clean the iron from dirt, both outside and inside.

Even the highest quality and expensive iron over time begins to work poorly and leave ugly spots on clean things.

And, although most often the reason for the appearance of soot and scale is the use of not distilled water, in some cases the appearance of a problem can provoke woolen or synthetic fabrics.

The proper use of the device and regular cleaning both inside and outside will help you to avoid such problems.

How to clean a Teflon iron at home?

The Teflon iron is quite a delicate and capricious thing, so it should in no way be subjected to mechanical cleaning. This effect can irrevocably ruin the thin layer of Teflon, and you simply will have to buy a new device.
To clean the soles of such an iron, it is best to use liquid cleaners.

Cope with this problem will help you ammonia. This fairly effective tool does not require any additional preparation. All you need to do is buy ampoule of ammonia in a pharmacy and treat them with the sole of the iron.

Advice: If you want to get rid of scale for a long time, then after removal, pour exclusively distilled water into the steam tank.

So:
• Take a pure, not diluted ammonia.
• Moisten a cotton swab in it.
• Wipe them the sole of the device.
• If the habit and soot did not disappear the first time, repeat the manipulation again.
• Rinse the surface with clean water, without the use of detergents.

How to clean an iron with ceramic coating?

A ceramic iron is considered the most convenient to use. He strokes any fabric pretty well, practically does not overheat and does not cover with a scope. It is also quite easy to clean it, but as in the case of Teflon devices, it is best not to use means containing rude abrasive substances for these purposes.

The best option for removing soot from this home assistant is considered ready -made fiberglass cleaning tools. It can also be safely used as a measure of prevention.

Advice: Take it a rule to process the sole with this tool every 10 days. So you can avoid the appearance of any problems with the ironing device.

• Disconnect the iron from the network and wait until it cools down.
• Apply a cleaning liquid to the sole of the ironing agent.
• Wait for about thirty minutes and wipe everything with a soft sponge.
• Additionally process the surface of the iron with a clean, damp cloth.

How to clean the iron from the scale inside with citric acid?

Unfortunately, scale can appear not only outside the iron, but also inside. Its appearance in the steam compartment leads to the fact that the liquid that is poured into it is polluted and begins to leave spots on all things.

Therefore, if you noticed small pieces of salt deposits during ironing, do not wait until they completely clog the steam holes, and immediately clean the internal tank.
Ordinary citric acid will help you get rid of scale inside the iron.

• Dilute 25 g of citric acid in a glass of distilled water.
• Pour the resulting tool in a steam tank.
• Connect the iron to the electricity and set the maximum heating temperature.
• As soon as you see that the device is heated as much as possible press the “steam blow” button.
• If you did everything right, then pieces of scale will begin to come out with the steam.
• Repeat the manipulation until salt deposits stop falling.
• After the iron is cleaned, drain a solution of citric acid and pour distilled water instead.
• Wipe the sole of the iron with a soft, damp cloth.

How to clean the iron with a pencil?

If home remedies do not help you, you can try to get rid of scale and soot with a special pencil. You can buy this miracle tool in any household store.

Advice: Only before starting directly to the removal of dirt, be sure to prepare all the necessary materials in advance.

After all, after the pencil begins to melt, you will literally have a couple of seconds to remove the soot. If you miss the right moment, then the molten tin falls into the steam holes and, subsequently, will paint the water in yellow.

So:
• Warm up the iron.
• Process absolutely the entire sole with a pencil.
• Pay special attention to the scenes of the carbon fiber.
• Wait until the pencil starts to melt and start removing it from the sole with a soft sponge.
• When the iron is completely cleaned, turn it off from the network and put it to cool.
• Wipe the completely cold device with a damp cloth.

How to clean the iron with vinegar?

Cleaning the iron vinegar does not require any special accessories and knowledge. All that you need ordinary dining vinegar and, of course, patience. And, although vinegar does not differ quite strong activity, it will still cope with burning and scope.

• If you remove dirt with this particular method, take care of security measures.
• Since vinegar will be applied to the preheated sole, it will be evaporated quite intensively.
• Therefore, you need to protect your respiratory tract from these fumes.
• If you don’t have a protective mask at home, then do cleaning, for example, under a kitchen hood.

• Heat the iron to the maximum temperature.
• Moisten a cotton pad or a piece of a rag in not diluted vinegar.
• Wipe the sole thoroughly.
• If the scale layer is quite large, then you can leave a rag a little to lie on the sole.
• Treat the steam holes with cotton sticks moistened in vinegar.
• As soon as you see that the scale is softened and began to disappear, take a wet tissue and begin to iron it.
• After the scale is completely disappeared, iron the dry fabric and put the iron to cool.

How to clean the steam iron?

If you bought a high -quality steam iron, then he must have a self -cleaning function.
If it is, then you are very lucky. You do not have to mess with cleaning funds and patiently remove the consequences of not entirely correct use of the iron.

In this case, it will only be necessary to heat the device as much as possible, and after it turns on the second time (as almost all manufacturers advise), you must sharply press on a special button and wait until all deposits from salt and calcium are released.
If you have chosen a model without this function, then use the following method.

• Heat the device.
• Moisten a cotton swab in peroxide.
• Process all places of clusters of scale and soot.
• If this does not help, then moisten a piece of fabric in peroxide and reward it with a little pressure.
• Repeat manipulation until the sole is completely clean.

How can you clean the iron from burnt fabric?

Every woman is familiar with the situation when, for some unknown reasons, a favorite blouse or dress is burned.
When this nuisance happens almost all ladies first think about a spoiled thing. Although in this case the iron itself suffers.

Usually, after that, pieces of fabric remain on its sole, which require immediate removal. If they are not removed in a timely manner, then there is a probability that after cooling the iron they tightly clog the steam holes and the device can no longer work normally.

Methods of cleaning the iron from steamed fabric:

• If the right moment is not missed, then the problem can be dealt with using an ordinary waffle towel. First, heat the device as much as possible and wait until the pieces of fabric begin to melt. As soon as this moment comes, wipe the sole with a towel thoroughly.

• Take the candle, wrap it in a piece of fabric, draw it in contaminated places, after heating the iron. Together with the melted paraffin, pieces of burnt fabric will also move.

• Also for these purposes you can use hydraitite tablets. It is necessary to take a whole tablet and rub it with a well -heated sole with it. The remnants of the tablets and burned fabric can be removed with a damp sponge

How to clean the iron from rust?

Typically, rust on the iron appears due to the regular use of unpeeled tap water. Therefore, if you want to avoid the appearance of such problems, then pour exclusively distilled water into the steam tank.

Some housewives do not bother and get rid of this problem with an ordinary powder cleaning agent or even fine sandpaper.

But if you, for example, have a Teflon or ceramic iron, then these methods can scratch the sole of the device quite strongly. If a layer of rust is large enough and is no longer washed off with soapy solution, then try to remove it with a special means of the hoarse.

So:
• Heat the iron.
• Apply hoars on the sole of the device.
• Through the places of contamination with a sponge or an old toothbrush.
• Wash off the remaining rust with a damp cloth.

How to clean the iron with salt?

It is quite possible to clean the sole of the iron in an old folk way - salt.

If you do not want to spoil the iron, then use small salt to clean it. It is best to grind sea salt first in a mortar and only then use to remove dirt.

• Find a thick sheet of paper and spread it on the table.
• Pour salt on it with a slide.
• Heat the device and walk it several times on the slide.
• Make the same movements as in time ironing, just a little stronger.
• Press the iron to the surface of the table.
• After the salt is darkened, you can stop cleaning

Video: How to clean the sole of the iron? Also tips on how to remove subpalins