How and how to seal wooden and plastic windows for the winter: methods, instructions

Heat in the modern world is expensive, so with the onset of cold weather, most of us are thinking about how to minimize its losses. And what could be worse for warmth and comfort than window drafts?

Let's look at the methods of insulation of classic, wooden frames and metal -plastic windows, which will help to significantly reduce heating costs without large additional costs.

Window insulation: Start by washing

• Before as to start warming the window - wooden or metal -plastic - It should be thoroughly washed to provide unhindered access to the infrared radiation house.
• Better and easiest wash windows using special tools, containing ammonia, which not only allow with ease get rid of fatty, sticky spots, But they do not give divorces.
• Naturally, not only the transparent part of the window, but also the frame, window sill, slopes should be cleaned of pollution-firstly, for hygiene reasons, And secondly, to Seals and putty Subsequently, they did not fall off from the application to the mud.

Window insulation outside

If you have the opportunity to engage in warming windows outside (you live in an apartment on the ground floor or in a private house), then you can say that you are lucky. After all, having performed a simple algorithm of actions, you will receive significant heat savings:

1. Remove unnecessary from slopes parts of building materials.
2. Found glue the cracks with a foam with a foam, immediately deleting the excess.
3. Set on slopes construction grid and whisper them.
4. The last stage of working with slopes is their primer and staining.
5. If you have wooden windows, then paint and cover the cracks On wooden structures.

Attention: external work should be performed in dry weather at air temperatures above zero.

Insulation of wooden windows indoors

• First you need to decide if you want clog the windows Only for the period of cold weather or for a long time? Depending on this, the appropriate insulation is selected, which we will talk about later.
• We have to work differently with each of these materials, so we will consider an algorithm for actions to warm windows in more detail.

Winging wooden windows with cotton and cloth

• This method is rightfully considered the most economical and environmentally friendly, In addition, he even causes some nostalgia - which of us in childhood did not push cotton to the window gaps under the wise guidance of his grandmother?
• First you need to fill all the gaps with cotton, Using a dumb knife, screwdriver or any other suitable tool.
• Then the cracks filled with cotton wool are glued on top prepared in advance stripes of fabric like bandages, which are first soaked in water, then squeezed and rubbed with household soap, which is an excellent additional insulator with air -permeable properties.
• Attention: at strong temperature changes, the strips of fabric can be peeled off - this must be carefully monitored. But in the spring, removing such a heater will be easier!

Insulation of wooden windows with silicone sealant

If you are ready to spend a little money and time for insulation of windows, then feel free to buy a silicone sealant and a construction gun in a construction store, with which you can very effectively get rid of drafts in the house:

1. Wash and degrease the window thoroughly.
2. Remove stacks supporting glass.
3. Using a pistol, enter a sealant into the opening between the glasses and the window frame.
4. After drying the sealant, set the headaces.

Attention: when buying a sealant, pay attention to it is necessarily transparent!

Wooding wooden windows paraffin

• Paraffin for window insulation - A very reliable substance that allows clogging everything, even the smallest, holes in a tree, so that not only from drafts can be guaranteed to get rid of, but also not to allow the glasses to freeze in severe frosts.
• The secret of this technology - the need for preliminary kindling of paraffin followed by uniform application on a wooden surface.

Attention: this method of insulation is very convenient, because after the onset of heat paraffin is easy to remove.

Insulation of wooden windows with a rubber seal

• One of the most effective and durable materials for insulation of wooden windows - These are rubber seals. They are either a hollow tube or a tape like a medical burning with a strip specially applied on one side, which is glued on the internal surfaces of the window.
• It should be noted that the seal glued in this way will hold about two years, In this case, the window can be opened and closed as you like.

Attention: a rubber seal will cost more than cotton wool and fabric. When buying, you should pay attention to its quality, and during use, make sure that it does not disappear.

Insulation of wooden windows with foam rubber and painting tape

• In this method, two types of materials are used - foam rubber (strips or special tape with an adhesive strip) and painting tape.
• If you use ordinary foam rubber, then you should act like a cotton - stuff it into all crevices, and also lay it along the window sash.

But a special foam tape with adhesive tape should be used as follows:

1. Pull the window frame.
2. Invest foam tape In crevices in several layers.
3. Maximum seal the tape Pressing on it, and return the frame to its place.
4. Close the places of the foam rubber with a painting ribbon so as not to spoil the appearance of the window.

Attention: foam rubber is a very good material to save heat, but it will not provide you with sound insulation!

Insulation of wooden windows with painting tape

• Many people for insulation of wooden windows They prefer to use maslar tape, which glue all weaknesses.
• This is a very fast and not too expensive method, but, unfortunately, and his effectiveness is very low. In addition, with temperature extremes and strong drafts, tape can often be peeled off.

Winging wooden windows with improvised materials

• In fact, warm wooden windows You can do anything - old newspapers and unnecessary shreds, bubble film, remaining from the purchase of household appliances and even soap.
• For example, if you have accumulated a lot of old newspapers then you can dissolve them on the strips, apply to them soap solution and stick on window frames.
• if you have puberny film, Then it needs to be cut according to the size of the transparent part of the window, thoroughly wet and glued with bubbles outward.

Insulation of wooden windows using innovative technologies

Progress does not stand still - and then even applies to window insulation! The Swedes, for example, use Eurostrine for these purposes - a special seal that is laid in special grooves and fixed by holders.

For this you need:

1. Completely extract the entire window.
2. Make grooves in the places of fitting the wings to the frame.
3. Put Eurostrine using a special tool.
4. Return back and window back.

Attention: Eurostrine is a material that will serve you with faith and truth for about two decades, without losing its fairly high thermal insulation properties. But keep in mind that his purchase will fly into a pretty penny, and yourself, without the help of specialists, you are unlikely to be able to carry out such insulation.

Insulation of wooden and plastic windows with a heat -shrink film

To increase the energy conservation of the dwelling, you can use a specially created heat -shaped film, which will stay qualitatively for the cold, “clogging” the incoming infrared radiation inside the house and creating an additional air layer.

This method differs from the previous ones in that the material is glued not only on the frame, but also on the entire glass surface of the window - both metal -plastic and wooden - as follows:

1. At first, the frame is cleaned of everything foreign debris and degrease.
2. The entire perimeter of the transparent part of the window is glued double-sided tape.
3. Cloves that exactly are cut out of the film suitable in size.
4. The film is applied close to the glass so that the edges are completely visited by adhesive tape.
5. Process the film warm hairdryerto level the surface.

Attention: both outside and indoors, the heat -assembly film is clearly visible, so be prepared for a not too aesthetic appearance. But the amount of heat saved will increase sharply.

Insulation of plastic windows indoors

• To effectively insulate plastic windows, First, find the foci of drafts - with your own hand, lighter fire or paper strip.
• It is believed that in the metal -plastic windows of drafts should not be by default, but in reality this is far from the case. The cracks in them may appear for various reasons: due to poor-quality installation, distortion of the frame, cheapness of materials, From which the window is made, wear of the seal, improper operation, and so on.
• To reduce heat loss, you can try adjust the window loops with a screwdriver, sometimes - completely replace the seal (This will require the help of a specialist).
• To get rid of condensate, you can stick Heat -saving film (Watch the methodology of working with it above), mount the glass heating system or simply curtain the window with warm curtains or fabric blinds.

Insulation of plastic window sills

• As a rule, metal -plastic windows are mounted on a foam, which eventually sags, which leads to drafts.
• If a from under the window sill hesitates strongly, It needs to be dismantled, cleaned up the remnants of the old foam and re -pierced, and all kinds of cracks and cracks are poured with silicone sealant. After that, return the windowsill to its place.

Window insulation errors

We offer you some tips that will help you avoid the most common mistakes when warming windows - both wooden and metal -plastic:

1. Do not use the classic medical plasty - He is very difficult to rip off over time.
2. If a wooden frames are very old, dry, it is better not to take a foam tape - it will not help you.
3. Do not glue energy -saving film on dirty glass.
4. Start insulation from external slopes.

Useful articles about the house:

• Zoning the living room and kitchen 12-15, 16, 17, 18.20, 25, 30, 40 square meters. m
• Design of the court of private house: Ideas
• How can you make a corridor with your own hands
• DIY artificial lawn installation
• Beautiful decorative shrubs frost -resistant, windproof