How and how to wash off the whitewashing from the ceiling quickly: methods, best means to remove whitewashing, useful tips, videos. How to prepare the ceiling for whitewashing: removing the old whitewash, sealing cracks, putty for whitewashing, instructions

Ways to remove whitewashing from the ceiling.

Removing whitewashing from the ceiling is a rather painstaking business, which takes time and a certain endurance. You will also have to face a large amount of garbage and dust therefore. Be prepared to get dirty and prepare work clothes. Below we will consider the best ways to remove white whitewashing.

How and how to wash off the whitewashing from the ceiling quickly: methods

If you are not ready to spend a lot of money on removing whitewashing, you can use the traditional ways.

Ways to delete whitewashing:

• With the help of sponge and water. This method is suitable only if you use chalk whitewashing. It is removed much faster and easier than lime. You just need to moisten the sponge in the water, apply a layer of water to whitewashing with a spray gun, wait a bit. Next, just wash the whitewashing, thoroughly erasing it from the surface.
• Experienced craftsmen advise removing lime whitewashing using calcified soda and soap. To prepare the solution, you need to grind the laundry soap on a grater and dissolve two tablespoons of chips in a liter of water. Further, 5 tablespoons of soda soda are introduced into this mixture. This solution is impregnated with a sponge, a little substance is applied with a spray gun on the ceiling, and is also washed off. If the layer is thick enough, you need to apply a lot of solution to the ceiling so that it is cutting off, and then with a spatula, remove the white white layer.
• Another good way is to use a spatula. Suitable if you were whitewashing the ceiling several times and a decent layer of whitewashing on it. In this case, it is quite difficult to wash it off by friction. Therefore, it is easiest for you to remove wet whitewashing with a spatula. To do this, moisten the ceiling with water and scrape everything from its surface. It is necessary that the whitewash is well wetted.
• One of the interesting and unusual ways is the use of Clayster and newspapers. In order to remove the whitewashing, you will need to lubricate the newspapers with a cooked clayer and glue their ceiling. Do not forget to leave the edges. After the Shcerer is completely dry, the edges of the newspapers remain. Thus, the whitewashing will be removed along with the newspapers. This is the easiest way that helps to avoid a large amount of dust and in a short time to remove whitewashing from the ceiling with the least efforts.

The best means for quick removal of the old white whitewash: a list with names and recipes for use

There are many means to remove whitewashing that can be purchased in the store. They are quite effective, intended in order to minimize the time and forces for repairs. Below is a list of such funds:

• Alpha 20. This is a special solution, which is sold in five -liter cans. It is intended not only to remove whitewashing, but also for the implementation of some other manipulations related to the repair. It is necessary to dilute the product in water in a ratio of 1:10 to 1: 100 and apply the product to the ceiling. After that, the surface is blurred, that is, whitewashing, which is then removed by a spatula. It is worth noting that this tool is most often used to remove lime whitewashing, not Cretaceous.
• Metilan. It is implemented in small canister and is sold in small containers of half a liter. It is divorced with water in a proportion of 1:10. It is applied to the surface of the ceiling and removed using a spatula.
• Space. A special tool for removing whitewashing from the ceiling. It is divorced in water and washing the coating with a washcloth. Next, the already wet layer of coating is removed by a spatula.

How to prepare the ceiling for whitewashing: sealing cracks, instructions

Cracks are sealing with starting putty, as well as alabastr. It is used if you changed the wiring and you have enough deep cracks in the ceiling.

Instructions:

• After you completely remove the whitewashing from the ceiling, you need to prepare the surface for further whitewashing or staining. Therefore, if there are small cracks or cavities on the ceiling, you need to level them.
• If you have a suspicion that on the ceiling there are areas with void inside, you need to use tapping these places and remove the material from them that is poorly held. To do this, you can use a spatula or screwdriver. Roll up their putty, which holds well.
• After that, you can fix the reinforcing mesh on the ceiling and align the starting putty.
• You can buy a ready -made mixture diluted with water in a bucket in the form of a paste. You can cook yourself from a dry mixture with the addition of water. Sometimes cracks are formed at the junction of the ceiling and walls, so you can use a screwdriver to detect them. Just spend at the place of joints.
• Next, using an angular spatula, a thick layer of starting putty is applied. Only after drying is the final processing and grinding of the ceiling.

How to prepare the ceiling for whitewashing: putty for whitewashing, instructions

Instructions:

• You need to apply a thick layer of starting putty. Its thickness should be large enough. Do not try to align everything smoothly as possible. You will not be able to do this, because the material itself is not intended for this. Your task is to maximize the difference in the changes in the ceiling level and completely put the holes and cracks.
• After that, when the putty dries, you need to apply a primer layer. Next, a thin layer of finish putty is applied directly. It contains finely dispersed particles, so alignment occurs very simply.
• When the finish putty dries, it is necessary to fabble the ceiling with sandpaper. If the cracks were large enough or the differences are significant, and there are also very deep, large cracks in the ceiling, then it is best to use a reinforcing grid for alignment.
• It is fixed on the ceiling and a layer of putty is already applied directly to it. At the final stage, after emphasizing, it is necessary to apply two layers of primer. Only after the complete drying of these layers is painting or whitewashing the ceiling.

How and what to wash off the whitewashing from the ceiling quickly and prepare the ceiling for whitewashing: useful tips

Removing whitewashing is a rather painstaking dirty process, so it is necessary to protect the rest of the rooms and yourself from dust.

Adviсe:

• Before you wash the whitewashing from the ceiling, it will be necessary to cover and wrap the furniture with a film or remove it from the room. It is also imperative to attach the film to the window, because you risk scratching the windows and spoiling the double -glazed window.
• Protect the door, you need to glue the film on the tape to the door. There are special films that are sold in construction stores and are very inexpensive. But this will help protect your furniture, windows and doors from pollution. Put on overalls, you can put on a mask and plastic glasses to protect your eyes from dust. Choose methods that involve the formation of a minimum amount of dust
• If possible, then purchase special tools for washing. Because they much accelerate the repair process and reduce the costs of carrying out these works.
• After applying such funds, whitewashing is removed with layers with a spatula. You will need two different spatulas, the first with a wide blade, and the second with a narrow one. In order to remove whitewashing from hard -to -reach places.

Removing whitewashing from the ceiling is a rather painstaking process. Therefore, you will have to work hard to simplify the task. Use one of our ways. We recommend that you delete the whitewashing using the Clayster and newspapers, as well as with the help of special tools.

Video: Removing the whitewashing from the ceiling