The head of the bed: how to make, update and beautifully decorate with your own hands?

How to update the head of the bed with your own hands?

Now, both options with the backs and without them are sold. The most popular are beds with forged backs, or wood products. However, many owners still prefer to purchase a bed that is not complemented by the backs.

How to update the head of the bed with your own hands:

• In this case, it is necessary to provide for the headboard. This is due to the fact that the wallpaper that constantly contacts the hair is very quickly greasy and lose their appearance. It is for these purposes that it is necessary to decorate the headboard.
• There are a lot of options with which you can save the wallpaper, make the interior of the room exquisite, and turn into the road the most ordinary repair. 
• The simplest option is the mounting of the panel. It can be chipboard, or ordinary plywood. Further, it is necessary if desired is complemented by foam rubber, or overtake it with a cloth, a substitute for the skin or even skin.
• If there are buttons, you can supplement them by making a carriage screed. Thus, something similar to the upholstery of the sofa will turn out. Try to choose fabrics that can be removed, washed or washed.

How to arrange the head of the bed with your own hands?

The most affordable option is to fasten the pillows. They can be made and sewn independently.

How to arrange the head of the bed with your own hands:

• Be sure to provide for the presence of ties and fasteners with which they will be attached to the wall by the bed. To tie pillows, you can use metal fasteners that are sold in accessories for curtains.
• Now there is a very large selection of rings, decorative fasteners created for such purposes. Indeed, during operation, almost all the fabric is saturated, polluted, so from time to time it will have to be cleaned and washed.
• The most optimal option is upholstery from leatherette, and eco-leather. It can be washed using soft detergents. In addition, it has been serving for a long time. If the room is not very dry air, then the decor will last about 10 years.
• If this is not possible, you can use the simplest options. Typically, the bed area is somehow distinguished, or decorated with wallpaper of a different color, frames, and ordinary foam baguettes. They are attached to liquid nails, and in this way they decorate the back of the bed.  

DIY head of the head

You can also come up with something like a screen.

DIY head of the head of the bed:

• For these purposes, several sheets of plywood are fastened, it is best to fix them on the hinges so that the screen can be folded with an accordion. Further, each sheet is pasted over with wallpaper, which contrast with the main color scheme of the room, or ordinary silk fabric.
• Try that the width of the screen exceeds the width of the back of the bed. It is necessary that she goes beyond her limits. In height, it can be slightly larger than the height of human height, or a little less.
• It all depends on whether you are going to use the screen for its intended purpose or it will serve as the head of the room. 

DIY beds: ideas, options

If you do not have a huge amount of funds to decorate the bed, you can do something similar to curtains, only in the wall.

DIY bed, ideas, options:

• To do this, the fabric is selected quite dense, the cornice is attached to the wall, and the fabric is hung on it. It is best if it is folded several times, imitating folds.
• If desired, you can make lambrequins, or peculiar nodes, fasteners, beautiful ribbons, with which the head of the head is decorated.
• This is a kind of imitation of a canopy, which closes the part of the wall located at the back of the bed. At the same time, this design is very practical, since it can be removed and washed in a typewriter. 

DIY soft head

The soft head of the bed is an affordable option that can be used for decoration. It is very simple to make it with your own hands, without certain skills.

DIY soft headboard: with your own hands:

• To do this, you will need a sheet of plywood, size 120 by 240 cm or any other size that correspond to the parameters of your bed. Next, you need to deal with the upholstery and filler. It is best if the fabric is suitable for color or contrast with wallpaper in the room.
• As a filler, you can use ordinary synthetic winterizer, foam rubber, or in extreme cases the old down blanket. As experience shows, this is an excellent alternative, if there is no funds for some more expensive option. In this case, a cover made of fabric, which corresponds to the repair, is sewn on the down blanket.
• Further, the down blanket with a stapler or bracket is fixed on the faner. In turn, plywood is attached to the wall. Now there are many fasteners that can be used to fix the headboard on the wall.
• If desired, you can use buttons so that the filler does not go and does not get down with lumps. This is relevant if the down blanket is used. If it is a synthetic winterizer or foam, then even with prolonged operation it is not lost in pieces, and serves for a long time. 

DIY laminate head

It is very simple to arrange the head of the bed using a laminate. This method is ideal if the material remains after the repair.

DIY laminate head of the bed:

• Thus, the headboard will contrast with the floor, and in general will fit into the interior of the room. For these purposes, it is necessary to provide bars that will play the role of the crate. They must be installed around the perimeter, at a distance of about 30-50 cm from each other.
• In the lower part, with the help of small shoe cloves, the first leaf of the laminate is attached to the crate. Next, you can lay it using a lock connection. For reliability, you can glue it, or use boot cloves.
• However, the headboard made using a castle connection will look more interesting and accurate. After that, it is necessary to hide the side parts. They can be decorated with a laminate, or use foam or polyurethane foam baguettes. Now there are a lot of products, using which you can decorate the bed and its headboard. 

DIY covering case on the head of the bed

The simplest option is to make a cover on the headboard. For these purposes, use a fabric that is easily erased in a washing machine so that it can be easily cleaned of stains and pollution.

DIY covering case on the head of the bed:

• If the headboard is made in soft upholstery, you can use the fabric, and a synthetic winterizer inside. It will turn out something similar todefense For a crib.
• These are ordinary fabric canvases that can be attached to the headboard with Velcro, buttons or ordinary ties. The size of the cover should be slightly larger than the head of the bed.
• Additional fabric is left to fix the cover with ties or Velcro. Below we present the scheme manufacturing a cover for the head of the bed. 

DIY Brown Barbel

The head of the bed, made in the style of a carriage screed, is very popular. It looks like something like rhombics. For these purposes, you will have to make a new headboard, which is cut out of plywood.

DIY Brown Barbel Baying Switch: DIY:

• Cut a piece of plywood in size equal to the width of the head of the bed. The height can be any as you like. After that, a synthetic winterizer or foam rubber is taken, holes in the places where buttons will be located are drilled in the faner.
• The most time -consuming process is pasting or sheathing buttons with a cloth from which the main part of the headboard is made. It can be made using foam and furniture glue. It is better to take foam rubber with a thickness of about 5 cm. Initially, it is necessary to make markings with a ruler to determine the size of the rhombics. At the points of intersection of lines, it is necessary to make a hole in the faner and foam.
• It is best to do this with a special nozzle for a drill calleddigenbrane. If it is not, then the usual cookie form is suitable, which will be approximately equal to the holes that are necessary in size.
• Fabrics must be taken 20 cm larger on each side, since the folds also require a small amount of the canvas. There is no need to fix the fabric around the perimeter. It is best to do this, starting on the left side, moving to the center, forming folds.
• They must be fastened with a thread and a needle. On the reverse side, you can fix it with simple buttons or a stapler so that the threads do not slip and the carriage screed does not deteriorate. For decor, you can use buttons from the outside. Below you can see how the fold is formed and the brown screed looks. 

How to overtake the head of the bed with your own hands?

In order to make a soft headboard, you can use ordinary pillows. That is, it is not necessary to use plywood, and carry out wood work. It is enough to purchase a metal cornice in the form of a pipe, and fasteners. It is necessary to sew pillowcases on the pillows.

How to overtake the head of the bed with a cloth with your own hands:

• For these purposes, you can use old unnecessary pillows into which you can breathe a new life. It is best if they are filled with synthetic winterizer or some kind of light filler. Next, it is necessary to sew loops to the pillowcases.
• The same method as the curtains on such cornices are attached, it is necessary to fix the loops onto the tube. The cornice is attached with dowels in the wall, directly near the bed, so that the pillows are slightly higher than the bulging part of the bed.
• This is one of the most affordable methods to arrange the head of the bed, while spending a minimum of money. An ordinary housewife will deal with this. The man will only have to fix the cornice.

Head of the bed of eco -leggings with your own hands

The use of eco -leather is also a very simple option. You will need a sheet of plywood, which will be used as a basis.

Head of an eco -leather bed with your own hands:

• You can use a regular plastic sheet, or plywood, with a laminated surface. Next, you need to purchase a sticky tape in the fittings store, which is attached to adhesive tape, these are standard Velcro.
• The first part must be attached to the surface of the plywood with Velcro, and sew the second to the pillows. Oddly enough, but you can vary the position of the pillows of eco -leather, build them in a checkerboard pattern, or use a variety of patterns.
• It is best if pillowcases from the pillows are removable in order to be able to wash them. By changing pillowcases, you can significantly change the interior in the room. Of course, now there are many shops that implement the head of the head, and is engaged in their installation.
• However, having even small knowledge in construction and sewing, you can make a fairly decent product that looks good.

DIY bed with a doggy from wood

Another unusual option is the head of wood. It is best to use a beam, or boards for these purposes.

DIY bed with your own hands from wood:

• Please note that it is best to paint them first, or cover them with a stain. Unfortunately, such a headboard will not fit into any interior, but only in the style of grunge or country.
• However, if you plan to make repairs in this style, then you can try to carry out this using acrylic paints, and a tree that is available. Wooden beams are fixed on the crate, covered with a layer of paint, decorated with stickers, or stencils.
• As paint you can use acrylic, or water -based. Below we present the option of decorating the head of the bed with wood. 

DIY head of the head of the head

First of all, it is worth focusing on the design of the room and the general style. The dimensions of the box are also taken into account. Below we present the drawings of the head of the bed with our own hands.

The best head of the bed with your own hands: Ideas, photo

Of course, the most beautiful option is the carriage screed, but it takes a lot of time for its implementation, and certain skills. In addition, you will have to purchase a plywood, a stapler, some devices, as well as tools in a construction store. You can, before starting to make the head of the bed with your own hands, the photo of which is lower, choose an acceptable option in magazines or store.