Beading technique: Methods. What can be weaved from beads with your own hands: ideas, schemes, photos

Beadwear is extremely popular today, and there are a huge number of crafts. In our article you will find out what there are beadwork techniques and what can be done.

Content

Beading technique: methods, diagrams, instructions
That you can make their beads with your own hands are simple crafts for beginners: ideas, instructions, description
Video: Beading how to make a bead tree-a master class (apple tree). Present. Crafts. Ideas of needlework

Beadwear is a whole art, and needlewomen create real masterpieces. Learning to do this is not very difficult yourself, it is important to understand the main techniques of work. If you really have a desire to do something beautiful, then beadwork is a very good choice, as products from this material are interesting and very attractive. If you firmly decide for yourself that you want to master the beadwork, then do not stop, and you will achieve excellent results.

Beading technique: methods, diagrams, instructions

Before starting work, decide on the overall equipment. It is best for beginners to use big beads, because it is much more convenient in work and the drawing will be clear.

For the first time it is better not to take very large products, because they require more skills, or at least just time. In most cases, the finished work gets a beautiful look, but much more depends on the material used. So if you come across beads with some interspersed, it is better to refuse it.

Choosing suitable materials is not difficult, just adhere to some recommendations:

Pick up beads exactly what you need according to the selected scheme
Before purchasing, inspect the beads for marriage
Beads are different and numbered. So large beads have small numbers and vice versa
It is better for beginner masters to work not with a fishing line, but with wire, because it is easier to set her shape with her
The fishing line differs with thickness and coloring, and it also needs a special needle

There are several types of weaving and we will talk further about each of them.

Mosaic weaving beads

Such a technique involves the location of beads in a checkerboard pattern. This allows you to get a dense canvas. Its main principle is that:

You can work with only one thread
An even number of beads is gained for work
If an odd number is gained, you will have to make extra transitions to the extreme beads

Creation Scheme:

So, for starters, we collect beads for wire or fishing line. Do not forget that its number should be even
From the second row, weaving is already directly beginning. We put a bead on the thread, and then let it through the second
Then we repeat all the actions and you will get a drawing through one bead
To make the third and further rows, pass the bead through the latter, which was in the previous row
Before completing the work, the thread must be drawn through the entire canvas to strengthen it

Brick weaving beads

This type of weaving is similar to the previous one, but its implementation is completely different. It is done in a different direction and it takes more time. Both techniques are similar, so they often meet in one work, and the compounds are not visible. Weaving is done as follows:

The first row is made of five beads. First you need to put three beads on a needle and draw a needle through the second to meet the first, and then through the third, to continue to weave on
Then we put on the fourth bead on the needle, and we spend the needle through the third
We repeat the process with the fifth bead and return to the beginning to go through all the beads again
You can expand the second level. We put on two beads and hook the thread, which connects the two beads of the first row, and remove the second from the bead.
Then we put on the third bead, and draw the stitch through the bead 2 and 3 of the previous row
Do the same with subsequent beads, and when you type the sixth, then enter the needle through the fifth bead, and withdraw it after the fourth

Expansion at the third level is also done, but only to the fifth. Then the narrowing begins. We collect two beads, and draw the stitches through the fourth row, beads 6 and 7. And through the second bead of the fifth row the needle goes back.

After that, we lead a needle in the direction of weaving on the fifth row through the first bead, and then through the second. In the fifth level, we dwell on seven beads and continue on.

Circular technique

Circular weaving, or French, is also popular. And this is not at all surprising, because all the crafts are beautiful and, as it were, air. This technique involves the use of a thick wire rod. Several beads are put on its base, and the wire is added from below.

The location of both wires is parallel, but they are fastened with one curl. This allows you to get one half of the arc. On the other side of the rod, another arc with beads is attached.

So, if you do it a couple more times, then you will get a whole sheet. From the back row the wire will be attached already with two turns, and the end is cut off. We cut one side so that a little end remains about half a centimeter. At the end, it must be bent inside.

Parallel weaving

Another well -known bead -saving technique is parallel weaving. It is considered the most convenient for weaving figures, and it is easy for beginners with it. Its essence is that the beads are put on only one side, and the second fishing line is then passed through the entire row towards. It turns out that they seem to change places.

Both rows are well tightened with such weaving and it turns out to be parallel.

By the way, in this way you can do not only flat figures, but also voluminous. In the latter case, weaving will be a little different, because the ranks will be located under each other.

That you can make their beads with your own hands are simple crafts for beginners: ideas, instructions, description

Despite the fact that beadwork has existed for a long time, it still remains relevant. Today, many fashion houses often decorate their products with beads or make certain elements for clothes. Women also actively make different jewelry, because any such little thing becomes original, unique and no one has such. And besides, it turns out inexpensive.

To learn how to make crafts beads a newcomer, you will need such materials as:

In addition, be sure to prepare a workplace for yourself so that it is convenient for you to work and do not have to clean everything every time. The lighting should be comfortable so that everything is visible, and materials and tools should also be placed on the table. So that your eyes are not difficult, it is better to make medium lighting.

Remember that if you are just learning to weave from beads, it is better to try from simple figures, and learn all the complicated slowly later, when everything is easy to turn out easily.

Bracelet from beads

Simple flagella from beads look great if you use monastery weaving to create them. Simply speaking, then this is a cross with a cross that will simply make any newcomer. So, for execution:

Take a piece of fishing line and in the center place 6 beads. Pass the fishing line from any side against weaving to get a cross.

Take one on the right, and on the left are two beads. In addition, draw the right end through the last bead to get another cross.
So we do this until the end of the row, and to go to the second, put on the right three beads and weave according to the scheme so that the upper bead from the second row is located at the first level of the first.

Put a couple more beads to the right end and in the second row you will have two crosses.
Thus, we make the right number of rows and complete weaving.

Beaded tree

Many newcomers can count that weaving trees is very easy. This is true, but the main thing is to observe the sequence:

First, make the leaves. They require a wire 80 cm long for each sheet
We type 7 cm of green beads by one, and then retreat from the edge of 20 cm and make twisting 3 beads
After that, the wire is twisted with a zigzag and the twig is obtained
You need to make seven such twigs and finally twist them into a single composition

To do this, twist two branches, and after 3 mm add the following
Such gradual twisting allows you to get beautiful twigs in the end
The barrel can be made more noble so that it does not look very thin
To do this, use the floral ribbon. Wind it on the barrel and gradually add the remaining branches

At the end of the work, you need to place a tree in a pot with a plaster base. And if you want to make a birch, then draw strips of brown color that will imitate the birch bark.

In the same way, other trees can be weaved.

Rose from beads

Coloring weaving is also very popular. Even newcomers can cope with such a task. Again, it is important to comply with the instructions:

Cut a small piece of wire 10 cm long. It is required for the base. The second piece will be 50 cm
Put on 5 beads on the base, and then wrap them
Get 2/3 wires with beads and make an arc out of them. In this case, the axis is covered sequentially with a thread

From all sides we make 5 such arcs. We will have a rose bud
Observing the principle, make a few more petals, at least 5, you can, and for severity, hug them at an angle of 45 degrees

Now you can collect a rose. To do this, we bend the three petals horizontally twice and bend it slightly
So that the middle does not crumble, squeeze the wire as tightly as possible
Still needed a thick wire. It is placed between the petals to harden the stem
In conclusion, take the thread of the muline and with its help attach all the petals to the stem

Fenechka from beads

To make an interesting bauble as a gift or just for yourself, you can use a simple scheme. Among the youth, different types of baubles are very popular today, because they look very interesting and beautiful. We will consider an example of how to weave a bailiff with flowers:

First of all, you need to fix part of the lock on a thin fishing line so that you can fasten the bracelet
Put on small beads into two pieces of fishing line. Each of the segments should not be more than 3 cm
Next, take a transparent bead through each fishing line and put on the beads again on each side
Longer instead of a small, put on a big bead. So you get the middle for the flower
Expand the fishing lines and follow after two blue beads
Observe the same principle when creating the rest of the links, then you will get the same sides of the baubles

Crocodile from beads

It is not necessary to make jewelry from beads. You can do just interesting figures, for example, a crocodile. It can be used as a keychain, suspension, brooch or even earrings. In other words, a universal thing and at the same time is very original.

So, put one dark bead into the wire. It will be a nose. The weaving begins with it

Put on the bead and place it in the center of the fishing line
Put on on one side two green beads and then through them pass the second wire
When you fix the structure, you will get a second row
Then you will add one bead to the fifth row.
In the fifth row alternate green and other beads to get eyes to the animal
The sixth row will be less, since the head must be narrowed

When you have three beads left, add two loops to make the legs
Bruck the crocodile make more head, so beads need to add more
After that, the belly taps, and at the end the paws are also made
The tail is made by one side of two beads, and at the end only one is used

Sakura from beads

Many people know what Sakura is is a Japanese tree that looks very beautiful and its flowers have a pink color. You can do it yourself from beads and plunge a little into Japanese culture. Despite the fact that making such a craft is not difficult, you should be attentive and patient, because for the most part the work will be monotonous. However, all efforts are worth spending them. After all, such a tree fits perfectly into any interior.

For work, you will need different materials:

The weaving scheme is quite simple and looks like this:

The photo shows how a branch for Sakura is made:

So, now you have studied all the schemes and you can start working itself.

We begin to make twigs, as they are the most important elements of the tree. For them, mix pink and green beads in some kind
Cut 70 cm of wire and start working 15 cm from the edge. You need to make a small loop and you can start stringing the beads

Make leaflets in the form of loops. They should be located at a distance of a centimeter from each other. For each leaflet, 5 beads are strung each

The resulting roots need to be twisted
When you reach the location of the loop, then stop the work and fold the workpiece in half
Now give all the loops a shape and straighten them. Similarly, you need to make another 53 branches

Now divide all twigs into several groups, so that in each it turns out 6 branches each
Now we make the main branch. To do this, twist three large blanks. Each will have 6 branches

Make three twigs on the side. Each should have two large blanks
Now you can make side branches from the main
Decorate the barrel with a floristic tape

Sakura is almost ready here, but we need to make a pot for her. Take a small pot and pour gypsum
Until it has dried, we place our tree in a container and leave to dry out

Now decorate the pot with a tree itself. Light the gypsum with glue and sprinkle with beads. You can make pebbles, sand or something else there. Here you can show imagination and use what will like more.

A brooch from beads

Beautiful brooches are obtained from beads if you embroider weaving on a felt. Take for example a simple option - watermelon. It is performed according to the following scheme:

First, apply a drawing on the felt. Be sure to draw the internal contours so that it is more convenient for you to navigate.

Additionally, make retroenses 1-1.5 cm, and draw another circuit. So it will be easier for you to remove all the extra.
On the wrong side, fix the knot with a thread and take it to the front side.

Embroidery of the elements begins with a seam ago with a needle. For example, first make part of the peel of green.
Repeat all the bends of the circuit and type two beads each time.
When everything is ready inside, you can proceed to the design of the outer circuit. Take beads of a different color or just more for him.

Try to have no gaps, and you do not need to embroider the allowances.
Separate each segment with different colors so that you have clear outlines of the watermelon, and the colors look brighter.

Now you need to remove the extra felt. This must be done carefully so as not to hurt the drawing and not damage the thread. If this happened, then use a transparent varnish or glue to fix beads. After that, go the bead with threads.
It remains to cover all the threads so that they do not spoil the view from behind. To do this, make a template on cardboard and cut it. It should turn out a little less than the main image.

Lubricate the brooch well with glue. This will allow you to fix all nodules, transitions and glue the cardboard.
Still glue the pin on the cardboard and give time to dry.
On a leather or suede piece, make holes for a pin. Light slightly spread with glue and fix the material.

Sew the felt and the wrong material along the edges. The knot should turn out from the inside.

If you can’t get something at once, then you should not worry and throw this business. Everyone starts with something and even the largest professionals had mistakes. Beadwear is an interesting and at the same time complex needlework that needs to be studied and patient. Over time, you can do more complex things, so try and you will succeed!