Quilted blanket: pattern and calculation of materials. Quilted blanket: how to sew

How to flash a quilted blanket? Methods of stitches of blankets with a photo.

Content

Love to create unique things for your home? Sewing a quilted blanket is a great idea to give comfort and warmth to your loved ones! In this article, we will talk in detail about which materials to choose to sew a quilted blanket, as well as how to cut and fasten the blanket both on a typewriter and manually.

Quilted blanket: pattern and calculation of materials

For example, we will give a calculation for a children's quilted blanket in size 110*140. In order to sew such a blanket, you need:

A cut of the fabric;
Slanting head;
Synthetic winterizer or other blanket filler;
Threads.

So, on a blanket of 110*140 we need two cuts of 114*144 cm. The calculation is very simple, the length of the blanket + 2 cm per edge on each side. It will also require a synthetic winterizer in the amount of 110*140 cm, if it is a ballpoint filler, then a size of 110*140 cm is usually required 400-500 g.

The calculation of the oblique fake is the perimeter of the blanket: (110 + 140)*2 \u003d 500 cm \u003d 5 m + 5-10 cm per allowances.

The quilted blanket: how to sew?

The quilted blanket is most often sewn from cotton fabrics, which usually “sit down” after washing and ironing. Therefore, preliminarily, the fabric must be ironed with steam (carry out the WTO) so that it gives a natural shrinkage, and only after that make cutting.

Lay the fabric on the even surface so that the folds do not form, and measure 114 cm on the one hand, and 144 cm on the other, apply a small circuit and cut the fabric to the necessary details.
After that, on the front side, indicate the stitch with the rinseed felt -tip pen or tank. We will talk about the stitches in the next section.
The next step is on the upper and lower part of the cover on all sides, bend the edge along the edge (the same 2 cm) and light up so that the unprocessed sides look inside the wrong side. After that, you can "layered" the blanket.
The first and lower layer is the cotton fabric upwards up, the next layer is a synthetic winterizer or any other filler, the next layer cotton fabric is the wrong side and marked with a simple side. Sour the blanket around the perimeter so that the synthetic winterizer is evenly distributed along the area of \u200b\u200bthe blanket, and you can proceed to sewing.

Stock foot - the best assistant for quickly quilting blankets and bedspreads

For convenience, install the sewing machine on the laid out the table so that a large area remains on the left, and the blanket glides freely, not postponing movements. If possible, purchase a foot for stitches and install it on a machine. Start the stitch of the blankets from one of the edges, and continue the stitch until all the planned lines are stitched.

Check if everything is done and secure the slanting base around the perimeter. The corners can be made both mowed oval and left with angles of 90 degrees. Stitch around the perimeter, thoroughly fix the thread and wash the quilted blanket. The product is ready!

Patchwork blankets are also sewn in the same scheme, where shreds are sewn one to one until they go into a large canvas. The size can be changed depending on the wishes.

Stiring a blanket: 4 ways to flash a blanket

In production, all blankets are fastened with cars, but household sewing machines do not always cope with such a task, especially if the craftswoman decided to sew a thick quilted blanket. In this case, the stitch will be sewn with hands.

How to quickly and easily fasten the blanket manually, is shown in the video lesson below.