Restoration and updating of the entrance metal door outside with your own hands: ideas, tips, photos. Restoration of the external spraying of a metal door with your own hands: ideas, tips, photos. Beautifully decorated entrance doors with your own hands outside: photo

Options for finishing the entrance door from the outside with your own hands.

The entrance metal door prevents the penetration of attackers into the house, and also protects housing from extraneous sounds, heat loss. In this article we will tell you how to update the front doors if they have lost their original appearance.

Restoration and updating of the entrance metal door outside with your own hands: ideas, tips, photos

It often happens that after a few years of use, the front door loses its presentable appearance. Therefore, the owners want to replace it. But if high -quality materials were used in the manufacture of doors, whether it is a tree or metal, then you can save a little, and not install a new door, but carry out a restoration.

Now this is done with old doors with a very thick metal canvas. Because the current metal doors, especially cheap, Chinese -made, have a metal thickness as a tin can. They are easy to open with a regular knife. Therefore, if you have a fairly high -quality door that has lost its appearance, do not rush to engage in replacement. Restore it.

Materials for the restoration of a metal door outside:

• Laminate
• Veneer
• MDF panel
• Self -adhesive
• Dye

Each of the restoration methods has its own advantages and disadvantages. Now almost all bases have many materials for the restoration of doors. Therefore, you can purchase MDF panels for updating. There is one of the simplest and cheapest options - this is a restoration using a laminate. Of course, this material is not the best, as it will not serve long, due to the fact that it is weakly resistant to mechanical damage.

It is easy to scratch, also break off a piece of casing. Therefore, such doors are not recommended to be installed in apartments if the entrance does not close on the door with a code lock and outsiders can often be in it. But if the door is guarded or you have a concierge in the entrance, you also live in a protected residential complex, you can allow you to update the door in this way.

Laminate restoration:

• To do this, the metal door is treated with an antibacterial composition and primer to hide all the irregularities.
• Next, the insulation is glued. This is foamed polyethylene.
• After that, the laminate is glued. The ends and joints can be sealed with plastic or metal corners.
• Masters recommend immediately collecting a laminate shield carefully fastening the locks of the material panels with each other. After you collect the shield, transfer it to the door, and install some load on top until it dries completely.

Restoration of MDF:

• Also, a good option for lining the front door is the use of MDF panels. They are sold standard sizes and with a variety of patterns.
• In order to cope with work, it is necessary to remove the front door from the loops, wash and clean for applying the adhesive composition.
• To do this, it is degraded and washed out. After that, the holes are cut out for the lock, for the eye and handle. The glue is applied to the door and MDF panels are tightly pressed to it. Further, this material is pressed by the load and is left until completely dry.
• Suitable for standard and non -standard doors. There are special MDF panels of such a size as standard doors.

Restoration of self -adhesive:

• Restoration with self -adhesive is the cheapest option. But one of the most unreliable, because a self -adhesive film may not be dense enough.
• Therefore, it will repeat all the bumps of your front door. In addition, the coating is soft and, if desired, it can be scratched with a key or a large bag of purchases.
• But if you do not have a decent amount of money now, you can use this method.

You can also ennoble the metal door outside with eco -leather or vinyl. How to do this can be read in this article.

Also, one of the options for updating the entrance doors is painting. Unfortunately, this method is now used extremely rarely, because there are more reliable, economical and pretty options. Painting does not always look perfect and can emphasize some kind of door flaws.

Restoration of the external spraying of a metal door with your own hands: ideas, tips, photos

A large number of doors are already sold with a metal coating. Such a coating looks very pretty, it is stable both to atmospheric influences and mechanical damage. Many owners of the metal door are wondering how to make such a perfectly even and beautiful coating. The fact is that you will not be able to restore the door yourself with the help of powder coating.

This powder composition is a mixture of metal powder and polymers. The door is covered with a dry mixture and placed in a special furnace in which the composition melts, enveloping the surface. At home, you cannot do this, because there is no suitable equipment and, accordingly, the furnace in which the powder coating can be melted.

Therefore, if you have a metal door with spraying, and it has already worn out, you can use the services of special workshops. Or update the outer side of the door using some other method. One of the best options is the use of MDF panels.

Beautifully decorated entrance doors with your own hands outside: photo

Even if you have a little money to restore the door, you can do everything with your own hands. In most cases, this is not difficult to do. Options with paint staining and sticking a self -adhesive film is the most economical, but less pretty and durable. Because such a coating looks quite cheap and unreliable.

One of the best options is the use of MDF panels, laminate, as well as cladding with vinyl or eco -leather. Very often, workshops use the technique of combining decoration techniques. Therefore, the outer part of the front door can be decorated with eco -leggings with MDF panels. The door is divided into areas, and most often in the middle jewelry of dermantine canvases are made. MDF plates are used at the edges to strengthen. Below are photos of the design of the front door, made by your own hands.

As you can see, decorating the entrance wits with your own hands is a rather painstaking work that takes time, as well as certain skills. If you do not have them, use the services of professionals.

Video: door finishing outside