Paper mask, a bear foam on your head with your own hands: instructions, templates

To make a bear mask for your child, you need very little time. Or you can use excellent templates from our article.

Content

The owner of the forest Toptygin is a frequent guest of children's matinees. So, you need to be able to quickly build a beautiful and original mask from improvised means at any moment, which would clearly make it clear that we have a bear and no one else. The easiest way is to do it from paper.

Mask from Paper Bear: 3 best ideas

Let's start with the fact that we recall the geometry lessons and we will Draw circles. This can be done with a compass, and if you don’t have such an instrument in your house, you can use a plate or a glass by circling them.

We draw a circle of about 10 cm in a radius on a dense cardboard. This will be the basis of our mask, in fact, bear muzzle. Then we take colored paper and continue to draw and cut circles: half in diameter and two small (up to 5 cm) - brown.
Now the turn of yellow or orange: two small circles of 3-4 cm and one-up to 7 cm in diameter. Everyone, with cutting circles finished, now glue them to the cardboard: brown are muzzle and ears, yellow - their inner circles. The ears should be glued so that they go beyond the mask.
We cut out a black nose and also glue it, your mouth can be glued, or you can just draw. We make our eyes, just cutting the holes in the mask. It remains to fix the ties (elastic band, tape) - and the mask is ready.

Another option bear masks on the head, slightly different from the first. We begin by we take brown paper and recreate Mishkin's muzzle with ears from above. In the lower part of the mask, draw a recess for the nose. Now you need to cut the drawing along the outer contour and trying on to the face, indicate the places where the eyes will be. In these places make neat slots.

We cut out two small circles from the yellow (orange), a little less diameter than the drawn ears, and glue in the center of the ears, thereby indicating their middle.

Next, make the cheeks, for what we apply yellow paper to the mask And circle the lower, carved part of the mask. We finish the cheeks on the top at the height that seems suitable for you.
It remains to cut the resulting yellow figure and glue it from the bottom to the mask. We cut a triangle with rounded edges from black paper and glue it above the place of seizure - this will be a nose.

We equip the mask with ties, a cord or an elastic band, attaching a real bear in front of us.

To make the mask more voluminous, you can replace the paper corrugated cardboard. In addition, the same effect will add a convex nose.
For it, we take a rectangular sheet of paper and put first from the long side the same three parts, after - in the wide way. Having made such folds, the paper should be deployed and perpendicular to be cut in the center.
You need to fold your nose, wrapping one on the other to the other parts that are cut. Just glue it to the mask. On top you can additionally stick a black circle, for a more reliable nose fixation. Here we have such a funny bear.

Constructing of foam rubber Mask Bear

This option is more complicated than paper, but more durable, it can be used more than once.
We start with cutting a foam rectangle, one side of which is equal to the volume of the head, and the second is the desired height of your flood mask. On the upper edge we denote and cut the triangles so that it turns out almost a crown. And now we combine the teeth of the triangles, smearing them with glue “moment” and acting with each other.

We take the next piece of foam rubber, the sides of which are equal respectively 30 and 20 cm. We draw a pencil in the middle with a pencil and draw a peculiar dome at the top.

Apply glue on the base: at the edges and two points next to the middle, on both sides of it. We also apply glue in two places at the base of the “dome”, closer to the middle. We cut out the “dome” itself and glue the side faces. We smear the “dome” remaining with glue at the seams and bend into the resulting cylinder, fixing with glue there.

Those points on which we previously applied glue are glued to each other, receiving a future voluminous nose.

Next, we make the lip, cutting out a rectangle with the sides of 13 and 12 cm below, divide it in half and draw two arcs from the central line to the edges. We cut out the resulting arcuate triangle and fix the sections with the “moment”, getting a kind of “boat”.

After gluing both parts (both nose and lower lip). We attach to a masque-step.

The ears are simply cut out in semicircles of foam rubber, like the superfluous.

Glue them to the mask and proceed to the cheeks. They are made of two circles of foam 6 cm in radius. We bend the fourth part inward and glue the mask on the two sides. The last stroke is to paint a bear mask with paints.

Bear Mask: Template

And for those who do not have time to engage in artistic creativity, always at hand have ready-made masks-shapes on the Internet, which only need to be printed and cut out.

Templates for the bear mask: