How to sew a toe on a heel, how to sew a large hole on the toe: tips

Instructions on how to sew a woolen, knitted toe.

Content

A toe is a type of underwear, which is represented by short stockings, missing to the knee. For the first time, such products arose in the 4th century BC. However, they did not look at all like now. Initially, the socks weakly resembled the fact that we wear daily, and were two pieces of wool or fur required around the fingers and heels.

Now it is a common knitwear that enjoys great success, and is acquired more often than other things. This is due to the constant load on the fabric that is wiped. Daily wearing contributes to the appearance of holes and scuffs, so most people buy new socks quite often. But what to do if the toe has broken, but at the moment there is no money to purchase new products? In this article we will tell you how to sew a toe correctly.

Is it possible to sew socks: signs

Only after 1589, with the invention of a knitted machine, ordinary socks became very popular, and common. They were not available to everyone, but only to the nobles, and to people with a sufficient amount of funds. Only in 1938, after the appearance of nylon, socks became ordinary underwear. There is a lot of information about whether it is possible to sew socks.

Is it possible to sew socks, signs:

Despite such a small detail of the wardrobe, a lot of signs arose around it. Socks are associated with a line of fate, as well as material well -being. Therefore, walking in leaky, torn, dirty socks is to lack of money and poverty. Signs arose even before they invented a knitted sewing machine, at that time they used footcloths. It was forbidden to wear footcloths with holes, dirt and scuffs.
This also applies to modern socks. Do not walk in torn, dirty socks, it is necessary to put them in order. It is believed that a bad sign throw socks into the garbage chute, so if you have several pairs of spoiled underwear, we recommend burning it, or bury it somewhere in the forest. Everything that adjacent to the body attracts its energy.
Therefore, it is through objects of lower, underwear that you can send damage or evil eye to a person. Even if you throw such things into the garbage chute, a huge number of people will contact them. These are employees of communal enterprises, as well as homeless people in a landfill.

It is not recommended to sew socks, this can cause saving, as well as a lack of money. If at the moment there are no funds for the purchase of new, high -quality socks, in no case should you walk in the holes. It is better to sew them.

How to sew woolen socks: tips

The option of correcting the defect depends on the fabric from which the toe is made, as well as the size of the hole. If it is a woolen sock, which is made of dense woolen threads, then the dodge must be produced not at all with thin threads of polyester, but with a thick version of the yarn. Knitted socks must be sewn with thin threads. The thinner the fabric used for the manufacture of socks, the smaller there should be a thread for repair.

How to sew woolen socks, tips

Try to choose the most suitable color, like the product. If there is no such color, there are methods using a secret seam, as a result of which the color of the thread will be invisible. Even a dark sock can be sewn with light threads, it will not be striking.
It is necessary to take the thread in the color of the product, tie a small bundle, without turning the inside out. This method is ideal if the toe broke on a business trip, and there is no thread in the color of the fabric. It is necessary to fix the knot from the wrong side, but the thread should be on the front side, that is, it is necessary to turn the toe.
Next, repairs are carried out using a secret seam. It is necessary to make horizontal stitches, which in size go slightly beyond the edges of the hole. That is, they should go to about 2-3 mm beyond the rupture line.
The stitch stretches from the inner, that is, from the wrong side. At the final stage, it is necessary to tighten the thread a little so that the seam becomes invisible. This option is often used in cases if it is not possible to sew the product, turning inside out. It is often used when lining, and during the hem of the sleeves on leather products. Exactly the same way is used to sew the toe imperceptibly. As soon as you pull the thread, the seam will become absolutely invisible.

How to sew a toe on your fingers?

Below we will offer several ways to sew woolen, knitted socks on heels and socks.

How to sew a toe on your fingers:

The easiest way to put in order the socks that torn in the fingers. The fact is that in this zone there is a seam that sews two parts of the sock, the plus part, and the sole. It is in this place that the seam should be flat and smooth. The main mistake of many in improper capture, and the introduction of the needle is far from the edge. Thanks to this, too rude seam is obtained, which can dig into the fingertips, especially if the shoes are not too comfortable and cramped.
Thus, this seam can cause corns and even wounds. Therefore, use a special seam that is flat, imitates a smooth line of two parts of the sock. Below, according to the scheme, you can see how to make such a seam. Remember that the main task is not to pull the thread. It is necessary that the stitches pass parallel to each other.
On the wrong side, the seam will be oblique, but outside it will be flat and frequent. You need to create a certain imitation of fabric, and place the stitches close to each other to smooth the joint of two paintings. Thus, you will interfere with the appearance of a rough and thick seam, smoothing it with the help of stitches and a straight thin line. After the work is finished, you can take a thick cardboard, pull the toe on it, and lay out wet gauze on top and iron it with a warm iron. This will help make the seam flat and will interfere with the occurrence of corns.

How to sew socks so that it is not visible?

Sewing woolen socks with the usual method or thin threads is not recommended.

How to sew socks so that it is not visible:

To do this, use special equipment, but you need to own experience with knitting needles or hook. First you need to cut off the torn edges with scissors, and free the loops.
Using knitting or hooks, through these loops it is necessary to go through new ones, using a woolen thread, which in color corresponds to the shade of socks. It is desirable that the quality of the thread, as well as its thickness is approximately equal to the structure of the sock fibers. After set of the loops on the knitting needles, it is necessary to knit plots using conventional hosiery or patch knitting.
It depends on which technique is connected by a woolen sock. Using such a technique, it will be possible to completely avoid seams. The hinged loops are reduced by double knitting, or stretching the thread. The easiest way to close all the loops is to tighten them with one thread. Thus, it turns out a semicircle. This type of sock repair is ideal if the hole is located on the heel.

How to sew a large hole on the toe by the dill?

Quite often, the method of staging socks is used, which is a patch on the hole area. The method is ideal if the holes are quite large, and it is impossible to combine the torn edges using a thread.

How to sew a large hole on the toe by the dill method:

Thus, there will be no pronounced heel, which will not interfere withray walking and rubbing. We advise you to sacrifice old socks with a huge number of holes, or any knitted fabric that is available in the house.
Ideal for these purposes is children's clothing and T -shirts. It is necessary to tear the edges of the hole with sharp scissors. Along the perimeter of the hole, with an indentation of about 3 mm, a patch of the same size as a hole in the sock is cut out. On the wrong side, the patch is applied to the opening area to completely close it. Using a thin needle, you need to sew the resulting patch.
Please note that from the wrong side, in no case should you use oblique seams, it is best for these purposes to use the usual “forward needle” seam, or imitating a line. Such seams will not rub or cause discomfort while wearing socks.

How to sew a toe on a heel?

A rather simple way to fix the toe on the heel is to create an even cut.

How to sew a toe on the heel:

To do this, put the toe on a flat surface, evaluate the hole on the heel. She looks like a semicircle. It is necessary to make an incision to make a sector or imitation of a triangle, with the center in the middle of the hole. Thus, you will receive a kind of corner, which is equal to 60 or 90 degrees. The size of the angle depends on the size of the hole. The larger it is, the larger the angle.
It is necessary to fold the toe along the heel line, while receiving 2 coinciding parts of the canvas. Using a flat seam, sew two parts. Try that the seam is not too dense, as it can rub the skin on the heel. After that, it is necessary to deal with the toe. As a result, something like a bag should turn out. In its form, it will now be little like a toe, and rather remind an ordinary stocking without a heel and a toe.
Remember that this method allows you to sew a hole very carefully, but the sock size will decrease by about one. It is best to use this repair method for dense, knitted fabrics, or terry socks. These fabrics contain a large amount of elastan, and are able to stretch in the heel area.

How to sew a hole on the socks correctly?

If the hole is on the sole, it is better not to sew it with flat seams, connecting the edges with each other. Such seams dig in the skin strongly, causing discomfort. It is worth using the method using additional fabrics, or a seam in a circle that allows you to simulate seams and lines.

How to sew a hole on the socks correctly:

It is necessary to take an egg for a dill or a light bulb, carefully cut off the torn edges of the hole to make something similar to a circle. Now, with the help of a thread, which in its structure corresponds to the fibers of the sock, it is necessary at a distance of 2 mm from the edge to go through the needle.
Fasten the thread and pull out from the back, on the other edge of the hole. You do not need to pull it, and you should not try to connect the two edges. The main task is to make the basis. Spend the needle forward with a stitch along the edge.
On the other side It is necessary to do the same. As a result, you will get a kind of grille that is located in the hole. Repeat manipulations perpendicular to the existing seams.
In this case, it is necessary to extend a new thread, through the existing base in a checkerboard pattern in order to create an imitation of the canvas. Thus, you will be able to completely restore the missing flap of fabric, which will make the hole as inconspicuous as possible. The toe will be very comfortable while wearing, and will not cause discomfort, due to the lack of protruding parts, rude seams that may dig into the sole.

Interesting articles on our website:

Remember that the holes in the bone area, or at the place of transition from the foot to the lower leg, can be sewn with ordinary seams. Nothing terrible will happen if such seams are rude. Usually in this area, shoes do not fit too tightly to the leg, so it does not cause discomfort. It is necessary to resort to the technique of using flat seams if the hole is on the foot, heel, in the area of \u200b\u200bthe mouse. Thus, severe pressure and shoes with a hard sole can lead to pain in the foot area.