How to sew, pour male and female shirt to size smaller? How to sew a male and female shirt in the waist, on the sides, in the shoulders, leaning at the shirt, sew and shorten the sleeves of the shirts with cuffs, shorten the length with your own hands: Scheme

Recommendations for suturing male and female shirts at home.

Content

Quite often, we buy things without trying on, and only bringing them home we understand that we have committed stupidity. Most often, such a purchase is not suitable in size and is simply sent to the cabinet. In fact, it is not necessary to do this in this way.

If you show a little patience, then you can easily adjust the inappropriate thing in size. In our article, we will try to tell you how to sew a shirt in the waist at home, reproach its length and correct the armhole.

How to sew, pour male and female shirt to size smaller?

We seize the male and female shirt by size smaller

As practice shows, even a novice needlewoman can easily cope with such a task. All that you will need to do in this case, correctly outline the excess material, which will eventually have to cut off. Therefore, make sure that you have 15-20 pins and sharp scissors in advance.

So:

At the initial stage, you will need to turn the shirt inside out and put it on the one who will subsequently wear it. The thing should be as well as possible on the body and must be fastened to all buttons.
Next, pick up the pins and begin to carefully lay the fabric along the entire seam. If you need to sew the sleeve, then reduce it in a similar way. During this procedure, make sure that the new trained seam is as smooth as possible. If you capture the material in one place more, and in the other less, then in the end the shirt will be deformed when wearing.
After the new line of the silhouette is laid out, you will need to remove the shirt from a person, prostrate new seams, and then carefully cut off all the excess. So that the fabric does not crumble during the socks, be sure to sweep its edge with a sewing machine.
At the final stage, you will need to steam all the seams with an iron and a shirt can be worn.

How to sew a male and female shirt in the waist?

Suture the male and female shirt in the waist

You can sew a shirt in the waist in two ways. If you bought a product of European manufacturers with a seam in the center of the rear bar, then you will have to sew sides. This can be done as we taught you a little higher, just in this case, the seam will be done to the sleeve line, and it will remain not touched.

Yes, and in this case, the new seam does not have to be perfectly straight. If you want to create the most fitted silhouette, then you can make it slightly arched.

So:

Turn out the product and put it on a person, or a special mannequin
Starting from the bottom of the suture, begin to stab the fabric so that in the waist area you have a barely noticeable rounding
Cut the fabric in this way about 10-15 cm above the waist line
Follow that you get a smooth transition from a new seam to the old at the top
Strive up everything with a machine, cut all the excess and sweep the fabric

If there is no aforementioned seam in the middle of your product, you can try to sew a shirt in the waist with a hood. In this case, you will just need to put a shirt on a person, and then form on its back 2 small shafts just above the waist area. After this is done, make sure that the product lies perfectly and you can calmly sit out.

How to sew a male and female shirt on the sides?

Suture the male and female shirt on the sides

If you do not have the opportunity to put a shirt on the one who will wear it, then try to sew it on the sides in a slightly different way. True, remember that in this case you will need to know the exact parameters of the body of a man or woman.

In view of this, be sure to measure them in advance using a sewing centimeter. You will need to measure the circumference of the chest and waist. If the shirt is long, then it will be necessary to take into account the size of the circumference of the hips line. After you get all the data, proceed to the main work.

So:

Put the product on a flat surface and outline new sizes
Using chalk or a piece of soap, draw the lines along which new side seams will be knitted
Scot the fabric in these places with pins
Stitch the seams, and then, using scissors, remove excess fabric
Sub the fabric and you can start ironing a shirt

How to sew a male and female shirt in the shoulders with steaming and without steaming?

Suture the male and female shirt in the shoulders

A way to sew a shirt without steaming:

Put on a shirt on a person and with the help of a sewing meter measure, what should be the distance from the collar to the extreme line of the shoulder
Put a line in this place and you can take a shirt
Lay out it on the table and with the help of chalk draw a future seam (to the edge of the armpit line)
Gently fold the product exactly in half, and then cut the fabric along the drawn line
If you did everything right, then in the end you have a separate sleeve and the main part of the shirt on your table
At the next stage, you will have to put on all parts with each other.
Keep in mind that you now have more holes for your sleeves, so try to put everything in such a way that you do not have large holes
If you need to make one pin from the inside of the sleeve
Having combined all the parts together, stitch them and the product will be ready for wear

A way to sew a shirt in the shoulders with steaming:

Using a meter, determine what shoulder length should be
Put the resulting result on the fabric and draw a line parallel to the seam of the sleeve
Re -check the lines symmetrically postponed
Next, gently spread the side seams and Pour the sleeves
Put the product on the table and cut off the excess fabric
At the next stage, first skate the side seams, and then connect the sleeves and the formed openings
Stitch everything with a double line and carefully defeat everything

How to sew up the sleeves of the male and female shirt?

If you need to sew the armhole, then first it will be necessary to tear off the sleeves from the main product. After this is done, put on the shirt and see how much centimeters you will have to reduce the opening. Next, take a needle with a thread and retreating from the edge of the seam of the sleeve to the desired distance, slightly sew the fabric in one place.

Re -check whether you have the correct size of the armhole and you can carry out suturing on the seam. After the opening is reduced, you can proceed to sewing the sleeve. You can see more detailed tips for suturing the armhole in a video set a little higher.

How to sew the sleeves of a male and female shirt?

If you need to sew the sleeves literally by 3-5 mm, then you can simply turn them inside out, put it so that the inner seam does not deform the fabric, and then carefully measure the desired distance and draw the line along which the new seam will pass. Yes, and remember, if you need to remove 3 mm, then you need to put off only 1.5 mm from the old seam. Since the fabric will be cut off on both sides, in the end you will get the desired 3 mm.

After the line is drawn, you will have to put it with pins and stir up a new seam. If you have to remove a lot, then you will need to reduce not only the sleeve itself, but also the armhole into which it is attached. In order to sew the opening, you will have to slightly spread the side seam under the sleeve, cut off all the excess, and then carefully sew everything back.

How to shorten the sleeves of a male and female shirt with cuffs?

If you need to shorten the sleeves of the shirt with cuffs, then do it as follows:

Initially measure the length of the arm from the shoulder to the line of the hand
If you like the sleeve to go a little on the brush, then add 5 mm to the received data.
Next, take a sewing meter and measure the sleeve
Design a line on it, to which cuffs will subsequently be transferred
Take small scissors and gently sprinkle the cuffs
Using scissors, cut the fabric on the previously drawn line
Next, attach the cuffs to the sleeve and see how much it should be sewn
Pass the cerebral in the already existing seam, and then stimulate the cuffs to the sleeve

How to shorten the male and female shirt in length?

Shorten the male and female shirt along the length

Shortening the shirt in length is considered the simplest process. If desired, in this case you can do without a sewing machine. Since there is no load on such a seam, you can just take the thinnest needle and pick it with neat small stitches.

So:

Put on a shirt and estimate how many fabric you need to remove
Designate this place using chalk or soap
Remove the shirt and put it on the table
Measure how many centimeters of the material must be cut off
Remove 1-1.5 cm from the received data and set aside one continuous line through the lower part of the shirt
Cut the excess fabric, and then with the help of pins stab a new seam
Stitch it and reward it