How to sew jeans on the sides at home? How to sew jeans in the belt, in the waist?

Walking jeans in the waist, hips and legs at home.

Content

When your favorite jeans became great, you can resort to urgent repair at home, all this is very simple, and most importantly - economically. You will learn about all the ways of suturing trousers from the article.

How to sew jeans on the sides, in the legs?

If you have lost a couple of kilograms, or you are tired of the once fashionable flared trousers, you can easily sew them in your feet. After such home repairs, you will receive fashionable narrowed jeans.
To correctly sew your favorite thing in the legs, you should know certain secrets:

Dress the jeans turned inside out and mix with pins a place for suturing-it will be at the very feet, but it is better to leave 1-2 cm for a shrinkage after washing
Remove the pants and put on the table, align them. Pants must lie evenly so that the line does not mow
Arm with white soap and sharpen the edge of the product - you will plan to have a suture place
To start a place near the pins, circle with soap, so the measurements will be more accurate
In the future, you will need a thread with a needle and a sewing machine, for a start, sweep the edges of the jeans, orient yourself on a pin-the lines should go exactly near the measurements
Try on the scheduled jeans, if such a preliminary ceremony is suitable - remove the jeans and move on to the final
Cut the excess part of the jeans that goes beyond the intended area and sew jeans on the sewing machine
To seal the edges with an overlock or zigzag

For suturing jeans in the legs, the main thing is the correct measurements — The main thing for suturing jeans in the legs is the right measurement

For the first time, the procedure may seem difficult to you, so if you have expensive jeans, you should practice for some cheaper thing. But when you fill your hand well, it will be easy to carry out such repair work for you.

Video: How to sew jeans on the sides in the legs?

How to sew jeans in the waist?

There is such a situation that jeans like glued are on their hips, but at the waist are ugly. In such a situation, minor repairs should also be carried out, which, with a sewing machine, can be done at home, for this:

In the case when an excess width is not more than 2-3 cm can save the elastic band. Buy a wide elastic band, cut the belt on each side of the jeans from the inside and pass the elastic throughout the length. Gently sew the elastic to the belt, paying special attention to the site of the cut
If you sew it from 3 to 7 cm, the work is added. First you should put the belt behind, between the side seams
Dress the jeans turned inside out and ask one of the pins familiar to stab tucks that are behind. The main thing is that they are located evenly from the seam in the middle
Remove jeans and carefully go through those parts that were marked
After that, carefully chop the stitched part
Take the threads in the color of the main ones and fix the tuck outside, laying the line along the entire length
Next, cut the belt, this can be done if you tear off the average stinging
Attach the belt to the jeans and measure the excess part that must be cut off
Now it is necessary to re -sew the already cut belt
Sew the belt again to the jeans and close the seam using a sting

There is another way with which you can sew jeans, but it will take you more time and effort. But the result will be very high quality. It is necessary to do the following:

Pour the clutch at the back and spread the belt by about 10 cm on each side of the middle seam
Pass the seam that goes between the legs (it is called step) by 10 cm
Pass the middle seam, but you should not unfold it, as it can shift. Just gently pin it with pins on the front side
Go through all the seams from the inside and also fix it with pins, after which all the mounts can be removed from the front side
Thoroughly steam the seams with an iron
Put the legs into each other and, having retreated from the middle seam 2 cm, draw a line by forming a triangle. The drawn line should pass along the waist line
Make a line along the line and sweep the edge
Sew the step seam from the inside with one line, with the front - double
Cut the belt in half and apply to the stitched jeans, remove excess fabric
Spend the belt on the front side, apply and equalize with trousers
Fix with pins and carefully stitch

IMPORTANT: In order for the elastic band to be correct, measure yourself around the waist and sew in jeans with a braid 3-5 cm less. So, due to stretching the elastic band will be the desired length

Thanks to this method, you can remove the extra part of the jeans, which stood out ugly at the waist. The last option will look especially high quality, but if it seemed too complicated to you, use the rest. With neat execution - the result will definitely be of high quality.

Video: Western jeans in the waist

How to sew jeans by size smaller?

Dropping extra pounds of course very cheers up, but also causes problems with the wardrobe. If jeans are great for you, then this can be fixed, especially if the decrease occurred only by size:

The easiest way is washing. Put in the washing machine the temperature of 95C and send jeans to hot washing. Such a process should be repeated twice, and make sure that cold water does not penetrate the jeans
While setting a cold rinse mode on a typewriter, stop the process. Dry the painted trousers on a hot battery or using a steam dryer. This method is good enough, but after a certain time, jeans may stretch again, so you have to repeat the procedure again
Another way is a wake. If the jeans are great in the waist and hips, suture jeans on the side. To do this, turn out the jeans inside out and mix with a pin the place that should be cut.
Walk along the jeans with soap, chop the pins and outline the places of a new line with threads. Put on jeans again, and if now they sit well, cut off the excess fabric and stitch the pants
If there are jeans in the hips, but there is a lot of excess fabric in the waist - it doesn’t matter, ease the pants along the seam that is located behind. Squeeze the stoker and cut the belt in the middle
On each side you need to make tucks - you will hide the excess material there. Do not make very long tucks, since because of this there may be ugly folds in the back pocket
When you removed all the unnecessary, sew the belt to jeans and return the barrier
A very simple way is to trigger jeans using side seams. In these places you need to make tucks, for this, spread the line that goes along the side seams
Next, gently place the excess fabric under the side seams and convert the jeans together again. This option is suitable if you have a quality machine or thin jeans, since the side seams are quite dense

If the jeans became large to size, then it is very easy to fit them under themselves thanks to these methods. Do not forget about your favorite thing, everything can be fixed.
Even in the case when the trousers are large in a particular place, you can pay attention and fix this particular part of the jeans. Do not contact the workshops - there you will spend a decent amount.
At home, when performing these recommendations, you will carry out repair work as a real seam. Moreover, you do such a job for yourself, which means that you will definitely do everything carefully and for conscience.