How to shorten, reduce the bracelet on the male and female watches of a metal, ceramic, retire bracelet independently: methods. How to remove the link from the watch bracelet?

How to reduce the watch bracelet with your own hands?

As a rule, most of the wrist watches that go on sale have a bracelet with a margin. Thus, manufacturers of such products are trying to make their goods accessible to people with different sizes. But unfortunately, it is this excessive concern for buyers that causes problems in people with elegant and small pens.

Bringing the purchase home, they have to think about how to fit the bracelet under your hand. Of course, the easiest way to fix this problem, take the clock to the workshop and entrust them with a qualified specialist. But as practice shows, most people do not have the opportunity to do this, and for that reason they have to shorten the bracelet with their own hands. About how to do this correctly, and we will talk in our article.

How to shorten yourself, reduce the bracelet on men's and women's watches?

A metal bracelet is good because it is better than the rest of the adjustment. Moreover, at the moment you can find a special device on sale with which you can easily tame the bracelet. All you need to do, just place it inside the device, securely fix it, and then start twisting a special handle.

It will have to twist it until she completely unscrews the stud, which holds the link. At the very end, you only have to remove it, and then fasten parts of the bracelet together. If you do not have such a device, try to reduce the size of the bracelet by moving its buckle-bunch.

So:

• If the buckle is attached on the strap with the simplest lock, then just elude it and move it to the desired length.
• If it is fixed with a hairpin, then you will have to get it first
• Gently open the buckle-bunch and find the hairpin on which it is fixed
• Remove the hairpin, and then move the buckle to the desired distance
• Fasten the hairpin back and can snap the lock

Yes, and remember that in the end you do not have to spin the bracelet several times, be sure to initially decide what length should be. When measuring, take into account that the steel strap will not spring and stretch. Therefore, it will be better if you add at least 3 mm to the received data.

How to remove the link from the watch bracelet?

If you can’t move the clock, you will have to remove excess links. This can be done using prisoners and thin awl or a large needle. If desired, instead of sharp -rubles, you can use standard pliers, but be prepared for the fact that it will be more difficult for them to capture a thin hairpin that connects the links with each other.

So:

• Gently lay out the bracelet and designate how many links you will need to remove. Keep in mind that if you have to remove a lot, you will need to do this on both sides of the strap. If you remove a large piece on one side, then after putting on the watch you will see that they are slightly shifted to the side.
• Carefully inspect the bracelet segments and find the hole into which the fixing spill is inserted. As soon as you find it, pick up an awl in your hands and carefully press it. Try to put the awl exactly in the center of the hole, otherwise you will not be able to put forward the stud outside the links.
• If the hairpin goes tight, take a small hammer and lightly tap along Shil. As soon as it appears on the reverse side, grab it with sharp -driving towers and remove it from the link. In the same way, take out the hairpin on the other side of the link.
• After removing unnecessary links, attach the bracelet on the hand and check whether the clock will be symmetrically located. If everything is fine, you can take any of the previously extracted studs and fix the bracelet segments among you.

How to shorten yourself, reduce a ceramic bracelet on men's and women's watches?

• I immediately want to say that the ceramic bracelet is very fragile, so it is advisable to carry out all the work with it as carefully as possible. And this means that, using pliers and awl, you must do everything smoothly, trying not to damage ceramic material.
• Also remember that these watches do not like strokes, so it will be better to eat the surface on which work will be carried out will be previously covered with a soft cloth or at least a cotton towel.
• Yes, and do not forget that in this case it is best to shoot the most extreme segments. And this means that for starters you will need to remove the watch strap, and then remove one segment on each side.

So:

• We lay the bracelet on the soft fabric with the end to us
• We take the extreme link and look for torsion brackets
• We gently open them and with the help of the prisoners we remove the excess link
• We act in the same way on the other side of the bracelet
• After the extra links are removed, you will have to stick the brackets back and you can fix the strap on the clock

How to shorten yourself, reduce a retorting bracelet on the clock?

Before you start shortening the reset bracelet, first carefully examine it. You must find the P-shaped brackets that interconnect the individual links of the bracelet. Initially, it may seem to you that there are no them there. But if you look closely, you can notice very thin metal locks that fasten individual segments among themselves. So you will have to get them with pliers.

So:

• Put the bracelet so that the P-shaped bracket is clearly visible to you
• Capture it as carefully as possible and begin to gently extract
• In no case do not rush so that it does not deform or not break
• Put the bracket on a piece of paper and move the liberated link
• If you do everything right, then in your hands you will get two instead of an entire part
• We count the right amount of unnecessary segments, again take out the P-shaped bracket and move the bracelet
• After removing all the excess, we connect parts of the bracelet and fix the whole bracket

How to shorten, reduce a bracelet, a strap on the watch Casio Edifice, Orient, Swatch: Ways

In principle, if you buy the original Casio watch, then you will have to shorten their bracelet with the removal of extra links. And this means that you will need to find a hairpin that connects individual segments, remove it as we taught you a little higher, and then remove all the excess.

Also, a method in which torsion brackets are removed for such hours. Since we have already told you above how to correctly shorten the bracelet with these two methods, now we will open a few secrets that will help not to spoil the expensive accessory.

So:

• The links of such hours are best removed on the one hand. As a rule, this is enough for them to sit perfectly on the hand.
• To find the right side, you will just need to carefully examine the bracelet. Manufacturers of this watch brand in advance provide the possibility of adjusting the length, therefore, on the right side of the bracelet slightly deepen the studs that connect the segments.
• Also, in the area of \u200b\u200bshooting segments, you will see arrows that will tell you in which direction it is best to remove parts of the bracelet.

Video: How to shorten the watch bracelet?