How to make a changing table with your own hands? Scheme and materials for assembling a changing table

DIY changing a chest of drawers or table. What is needed, drawings, assembly.

Content

The expectation of a new family member is a touching and troublesome time. And especially costly, because by the birth of the baby it is so much necessary: \u200b\u200ba crib, a stroller, a bath, and a changing table, and a new chest of drawers specifically for storing a large heap of clothes, and of course clothes and a variety of textiles.

If the future father or grandfather loves to craft with his own hands, then some parts of the interior of the children's bedroom can be created with their own hands. This article contains all the necessary materials on how to make a changing table, as well as tips on how to make it as convenient and functional as possible.

What types of changing chests of drawers exist?

At a time when the baby is not in a bed or a manger, he should be constantly under the careful supervision of adults. The changing tables are specially designed so that everything has everything at hand, and there was no need to move away from the child, which ensures security for the child and excludes any possibility of injuries.

If you independently decide to make a pattern table, you need to take into account some nuances:

The material should be safe and certified
The design must be stable, durable, smooth so that the child could not get hurt
The dimensions of the singer. You can make changes to the height of the chest of drawers, in the number of boxes and so on, but do not change the standard dimensions of the player, since they are designed for a child up to a year. It will be a pity if the baby grows up, and it will not be possible to use such a necessary thing
Mattress. Be sure to water -repellent fabric. Many parents dismiss this item, believing that you can put the oilcloth so. But the oilcloth will crumple and there is a chance that a liquid that can not always be removed on a mattress.
Also, the mattress must be tough. On it you will do massages and charging. The child will try to turn over, sit down and for this also requires a hard surface

Polenators can be portable and stationary. The stationary swimmers include. This is very convenient, all all the things of the baby are collected in one place.

The optimal mobile versions include dosks and patterns of a storyteller that can be folded and transported. Such a model is needed if the family lives in several places and constantly moves.

For those who want to create the most convenient conditions for their child, but live in small apartments are ideal for hanging swaddies. By the way, later outweighing lower, such a singer will turn into a suspended table for games and drawing a grown peanut.

And here is another functional table. A patilation with a baby bath and a mass of shelves for everything necessary for bathing and caring for a child.

And in conclusion, we will consider another model of the pati-cod-bed. By the way, such beds of transformers are often rebuilt from the bed for a newborn to a teenage bed. Only one thing will serve the child until 13-14 years old.

Materials for a changing chest of drawers

Landipinators are chests of drawers belong to modular furniture, the performance of which is feasible to a man who knows how to draw and hold a drill. Making with your own hands has a number of advantages.

Individual sizes (especially relevant for small -sized apartments), saving the budget, creating unique things for your child.

It is preferable to use a tree, as it is rightfully treated with eco materials. But the cost of a natural tree is quite high, and work with it is very laborious. An excellent alternative is chipboard and MDF laminated plates. Before purchasing materials for the children's room, be sure to check the quality certificates. This applies to any material.

How to make a changing table with your own hands?

In this part, we will tell you how to make a changing table-comet with your own hands. Such a chest of drawers will last for many years, in the first year it will play the role of a radio and chest of drawers, in subsequent years it will be a chest of drawers. This model can be made of both wood and laminated chipboard or MDF.

First we present a sketch of the future chest of drawers

The next step is to make a drawing. If our dimensions do not suit you, you can proportionally increase or decrease any parameters of the chest of drawers. Be sure to pay attention to your growth and lump height.

You must stand evenly, without bending and not stretching over the countertop. If the spouses vary in growth, focus on the future mother, since it is she who will spend the main part of the time near this chest of drawers.

Drawing for a changing table with dimensions

For furniture, accurate dimensions and straight angles are very important, otherwise it will look crooked, will not be stable, and the service time will be significantly reduced due to the inconsistency of the parts. If possible, order the cutting of the material, most often this service is also offered in places of its sale.

Also, in addition, the following materials will be required:

Full rolling guides (2 pcs for each box)
Furniture pens (in our case 8 pcs)
Plastic legs 4 pcs (so that there is a gap of a few mm under the chest of drawers, for air movement, as well as as protection against moisture)
Intersecision screeds 2 pcs with a diameter of 5 mm (for a folding system)
Self -tapping screws 16 and 30 mm
Confirmates 70 mm 5 pcs
Furniture corners, they are necessary for fastening from below to the upper partition. Size: 20*20 mm

In the event that you are made from chipboard - an irritation ribbon (the length is calculated around the perimeter of each part.

It remains to collect everything in parts. If you have questions about the assembly, watch the video below.

Video: Assembly of a chest of drawers

How to make a suspended changing table? How to make a wall -mounted changing table?

As already mentioned earlier, a fraud table is just a find for young parents living in small apartments. Young parents often have a question of how to make a wall changing table strong and functional.

The choice of materials is the same as in the previous raditor. What you need to pay attention to: the wall to which the radio is attached. It should be strong to be sure that the peel regiment will not fall with the severity of things and the child himself.

How to make a portable changing table?

For those who already have a chest of drawers, a suitable table and they need an exclusively changing table, we offer to make it with their own hands.

The assembly is very simple. We make a drawing in which 4 details. The bottom, right and left sidewalls, and the back wall. By the way, the wall can be both at the height of the sidewalls and ends on the bottom, then it will serve as a stiffener.

How to make a mattress for a suspended table with your own hands?

Parents who go shopping for the future baby are simply shocked from prices for children's goods. But since you are reading this article, then a changing table, most likely a man in your house.

But the task of the woman is to supplement the radio radio directly with a mattress.

Material: hard foam rubber tall 5-7 cm along the cut; The water -repellent material is a raincoat, an oilcloth on a fabric basis is possible.

Size calculation: measure the width and length of the bottom. Cut the foam rubber with a gap of 1 cm (0.5 cm on each side). The mattress can be either even and with sides.

If you decide to do with the sides, cut a strip of foam rubber, the length of which will be the length of the mattress. Cut diagonally along the piece. It turns out two corners in a mattress. They glue them on the sides with hot glue. Then we go to the pattern of the material covering the mattress.

We sew everything except one end side through which we insert the foam rubber inside. Sew. The mattress is ready.

How to assemble a changing table at home: tips and reviews

Alexandra: Our first parenthood coincided with the end of study. It is not worth explaining that there was no money for anything, and the parents have become a fundamental position - you are an independent family, and we will not give you help. And we, having consulted with my husband, decided to make all the children's furniture on our own, so that it was cheaper. The singer was made suspended according to the IKEA photo, drawings and calculations all themselves. The third baby is already growing on it, we do not think about purchased furniture. Do it yourself in a special way, much more reliable, and it is pleasant in my soul when we look at things made by our own hands.

Ulyana: We planned the baby for a very long time. So long that during this time they managed to get settled with their apartment, cottage and car. But here is a holiday on our street - two stripes on the dough. Probably, the baby just waited for his parents to earn everything for his good life. Pregnancy is the time to arrange a mini world of our baby. We opened the catalogs and were upset, what we really like-somewhere in Europe, and we have everything so patterned. But the budget does not allow us to be purchased in expensive European stores, and to pay for delivery from distant lands. That same evening, we shared our experiences with friends who gave us the idea. Individual solution! The husband caught fire so much that he decided to make everything on his own. Its first product is a changing chest of drawers. Standard drawings plus fabulous fantasy and chest of drawers in the style of Cinderella with a radio crown with a crown.