How to make a knife kerambit of paper, cardboard, with your own hands: phased instruction, photo

How to make a knife kerambit of paper, cardboard, with your own hands: phased instruction, photo

An article on how to make cerambites knives, as in KS GO, from ordinary paper or cardboard.

Kerambit knife weapons: parts, drawing, paper cutting scheme

This article is about how to make a Kerambit of paper yourself. In it you will find several schemes with step -by -step instructions and photos of ready -made knives of cerambites made and painted with your own hands.

Our first Cerambite scheme will help make such a knife as in the photo above.

Scheme Kerambit knife from paper
Scheme Kerambit knife from paper
  • To make kerambit of paper, it is better to use white dense sheets. In terms of density, they are thicker than ordinary office paper for printing, but thinner than cardboard. I hope you understand what is about.

IMPORTANT: It is better to take the glue not PVA or the stationery, but one of those that are sold in construction stores. Transparent liquid glue for wallpaper or skirting glue is suitable. In quality, they are much better, stationery glue.

  • First we glue together details of the core of cerambites, which are indicated on the diagram by a light green color.
  • Then glue to the core side details indicated by blue, 6 on each side.
  • After that, we attach to the workpiece of cerambit details painted in the drawing lilac.
  • Glue at the end , decorative pads.When all the blanks are glued, put the kerambit of paper on a flat The surface, put the book on top, and then put something heavy on top to make the press. And so leave to dry.

When all the details of the paper from the paper are glued, it will look like this:

Kerambit of a do -it -yourself paper knife
Kerambit of a do -it -yourself paper knife

How to decorate the Kerambit of Paper?

  • To decorate the Kerambit of paper, it is best to use watercolor or oil paintsbecause they give beautiful shades, mixing with each other, and allow you to create a gradient pattern.
  • First, you need to paint a cerambit knife white to get rid of the pencil traces.
  • The knife handle is stained with several shades of gray. The triangle near the blade is painted in dark gray color, and stain recesses for fingers in very light gray.
How to make kerambit of paper: paint a knife handle
How to make kerambit of paper: paint a knife handle
  • The rest of the handle is painted with gray, which will turn out if you mix the two previous shades. To decorate the knife blade and a ring at the end of the handle designed for a finger, you need to use several shades of blue, yellow and red.
How to decorate the Kerambit of Paper?
How to decorate the Kerambit of Paper?
  • Our ready -made Kerambit's knife will look like this. It turns out to be very bright and similar to that Cerambit that you can arm your character in KS GO.

Such a coloring of the Kerambit of Paper is called in Ks Go "flickering marble" or "Marble Fade".

Cerambit of KS GO
Cerambit of KS GO

How to make a knife cerambit weapon from A4 paper: step -by -step instructions

Our next model of paper weapons looks very cool. it Rosomachi claws. And to make them easier than cerambitis, because it needs to glue the details of only the same size in it.

How to make wolverines of paper from paper
How to make wolverines of paper from paper

On our scheme “Claws of Wolverine from Paper” there are only two details, these are: brass knuckles and claw. And for work, we need not only the usual glue for paper, but also the superclles to reliably glue the claws to the brand.

Weapons ks go claws of wolverine from paper, scheme
Weapons ks go claws of wolverine from paper, scheme

How to make a knife cerambit weapon from A4 paper:

  • First, cut out templates from paper.
  • We put the album sheets with each other, it is most convenient to cut out if you fold about five sheets together.
  • For each claw, you need to glue with each other at least ten sheets of paper, and for a caste at least twenty.
  • Instead of paper, you can use cardboard. Then the claws must be made from one sheet of dense cardboard, and the brass knuckles from three sheets glued together.
  • The next photo has already been cut out all the details.
  • On each claw we cut out a square groove, the width of which is equal to the thickness of the brand.
Paper weapon step -by -step instructions
Paper weapon step -by -step instructions
  • When all the details of the weapon are ready, we glue them among themselves. Lubricate the groove on each claw of superglue and attach it to the brand.
Weapon from paper claws wolverine step -by -step instructions
Weapon from paper claws wolverine step -by -step instructions
  • When the weapon made of paper is ready, color it with black paint, and then draw the stripes with a silver marker.
DIY paper weapons, step -by -step instructions
DIY paper weapons, step -by -step instructions

Video: How to make wolverines of paper from paper?

How to make a tiger tooth from paper from paper?

KS Go has a lot of beautiful cerambites knives, copies of which can be bought or made of paper with your own hands.

Kerambits knives from the game ks go
Kerambits knives from the game ks go

To make paper kerambit Tiger tooth Use the scheme. On a sheet of paper in a cell, draw a knife. If one cell is equal to 1 centimeter, then the knife length will be 18 cm.

How to make a kerambit of a tiger tooth from a paper
How to make a kerambit of a tiger tooth from a paper

Now it will be necessary to cut out parts from paper or cardboard, which will need to be glued to the knife and blades handle in order to achieve the effect of bulges. Cut several paper blanks and stick them one on another. In the diagram, the details are indicated in yellow.

Cerambit Tiger Tiger with your own hands from paper
Cerambit Tiger Tiger with your own hands from paper

Wait until the glue dries and color the knife with watercolor paints.

Cerambit Tiger Tiger with your own hands
Cerambit Tiger Tiger with your own hands

How to make a cerambit knife from a cardboard box?

For the manufacture of cerambites of a knife from a cardboard box, packaging for gift sweets is suitable. If there is no such box, take the packaging from tea. If you glue such a cardboard in several layers, the knife will be strong enough. But the packaging for shoes can be too soft. Corrugated cardboard can be suitable for gluing convex parts.

Corambit scheme from cardboard
Corambit scheme from cardboard

INTERESTING: Cerambitus is a real dangerous weapon, which was used many centuries ago in Japan. There is a version that the prototype of this knife was the claw of the tiger. However, in our country kerambit It is not considered cold weapons, and you can buy it without special permission.

Video: How to make a carmbet knife from cardboard?

Origami Knig Kerambit of Paper: Description Scheme

To make origami knife from paper is quite simple. But, Kerambit knife has a complex curved shape. To add such origami, although complex, but it can be done in just 5 minutes. How to make origami Kerambit of paper, see the video.

Cerambit of a bloody web from paper: scheme, instruction

The basis for cerambitis of the knife Bloody web is done as described above, and such a knife can be painted with watercolor or acrylic paints.

As an option, we offer you another scheme according to which you can make a Kerambit of a bloody web of paper.

Cerambit of bloody web circuit
Cerambit of bloody web circuit

Video: Kerambit Knife Bloody Putin from Paper

How to make Kerambit Gold from paper?

You can make a Krambit of paper from paper in the same way as a tiger tooth knife. Only the knife blade will need to be painted to the color of gold. And in order to achieve the effect of the gloss of gold, paint the knife blade with a light and dark shade of golden color.

How to make a Krambit Gold from paper
How to make a Krambit Gold from paper

Kerambit Knock from Paper: Photos of the best

Of course, purchased kerambits knives look very beautiful toys for adult men. But, a home -made Kerambit of paper can be no less beautiful.

Homemade Cerambit of KS GO
Homemade Cerambit of KS GO

Knives with a pattern Tiger tooth or Tiger Tooth, as they are called in the game, look very impressive.

Cerambit of a bloody web with your own hands
Cerambit of a bloody web with your own hands

Only a look at this photo can be understood that you can understand that Bloody web On Kerambit is drawn, and the knife is made with your own hands.

Personed cerambit: gradient pattern
Personed cerambit: gradient pattern

Cerambit with a gradient pattern looks very bright and unusual. Any person who is familiar with Ks Go, seeing you such a knife, will immediately remember the game.

The next photo is not real carambit, but only a pencil pattern, but the choice of shades and implementation are remarkable. We think that if you paint a home -made carbit of paper in the same way, it will turn out great.

Carambit, pencil pattern
Carambit, pencil pattern

The knife in the next photo is purchased, but the drawing in the form of a mosaic on it simply fascinates.

Kerambit with an original pattern
Kerambit with an original pattern

Video: How to make kerambit of paper?



Evaluate the article

Add a comment

Your e-mail will not be published. Mandatory fields are marked *