How to make a manicure for yourself at home, with varnish and without varnish: step -by -step instructions. The selection of materials and tools for carrying and hardware manicure

How to make a trimmed and uneducated manicure at home?

Content

Recently, a manicure for every woman has become mandatory. Because all the young ladies want to have well -groomed hands, nails, and attract attention to themselves. In this article, we will tell you how to make a manicure yourself with and without coating.

Tools and materials for conducting manicure at home, selection of nail form

List of tools for crap manicure:

Manicure scissors
Circular forceps
Orange sticks
Nail bath
Pusher
Pillet with a size of 180-240 gritt
Salt
Soap
Towel
Antiseptic

Try to purchase quality tools. Plugs and nippers for an ingrown nail are mandatory. They can cut thick nails or use for pedicure. The difference between these pieces in the angle of sharpening of blades.

Tools for hardware manicure:

Milling cutter
Mills: flame, needle, diamond and corundum ball
File
Antiseptic

Do not purchase cheap pieces and forks for cutting cuticle. They cut it poorly and can cause a cut. Pleshot for key fobs are not suitable for manicure, they have useless sharpening, they do not cut the edges, but tear them. Correctly select the shape of the nail. The diagram with forms is presented below.

Please note that the choice of cutters should correspond to the manipulation. Large cutters with green and black labeling should not process natural nails. The blue cutter of corn leaves cuts on natural nails. Therefore, to process the cuticle and hardware manicure, choose corundum mills or with diamond spraying. At the final stage, you can process the silicone polisher.

How to make a classic wiped manicure for yourself at home?

There is an erroneous opinion that a manicure cannot exist without covering. This is wrong, because the coating is just a decor. Well-groomed nails are truly appreciated, which do not need to be varnished or gel polish. Well -groomed nails should be clean, neat without burrs, cuticles, with a perfectly flat shape and brilliance. In order to achieve such a result, you need to do manicure. There are several ways to fulfill it. Classic manicure is performed using steaming using nippers, tweezers, and scissors.

Instructions:

To do this, you need to dial a slightly warm water in a special bath and add sea salt, a few drops of liquid soap. Hold your hand for 5 or 10 minutes.
After that, one at a time, the fingers go from the bath. It is necessary to use a cannon or orange stick to push the cuticle towards the hole. After that, the scraping of phergy at the cuticle is carried out. Using the acute side of the orange stick, a transparent film is exposed, which must be removed.
After that, bites need to cut the cuticle around the perimeter of its growth. The sharp side of the wand removes the contents from under the nail, if any. These are dirt, possibly dead skin particles.
Further, it is necessary to use a file for natural nails to tie a free edge and give it a shape. The choice of shape depends on the thickness of your fingers and the features of the nail bed.
As soon as all the manipulations are made to give a greater shine to the nails, they can be polished by an ordinary polisher. The final stage in the implementation of the classic manicure is applying oil for the cuticle.
This manicure is classic, but the most labor -cost in time, using cutting objects that will have to be sterilized from time to time or use special means to remove microorganisms. In addition, professional tools are quite expensive. It is necessary to sharpen them, when blunting.
Do not use to give the shape of files with rude abrasives. Products for artificial material are not suitable for natural, thin nails. They scrap the edge and make it torn.

How to make a hardware manicure for yourself at home

Manicure can be made using special equipment. Now the home options for milling mills are sold, which are very inexpensive. This is a well -known, popular pen that can be purchased at Aliexpress. It is a pen with an engine that joins the power supply. Mills of different diameters are inserted into the coupling, with different grains size. With the help of these funds, keratinized particles, as well as cuticles are removed. Here it is also necessary to adhere to a certain scheme. Handles and cutters for hardware manicure can be found here.

If you don't have an account yet Aliexpress, Register on the site and enjoy all the privileges of the buyer, getting bonuses, discounts and good cashback. You can study registration by studying article on our website on this link or video instructions on this link.

Instructions:

A feature of such a manicure is that it is carried out on dry, that is, without preliminary smearing. That is why it is ideal before staining gel polish or for building. Because the nail does not absorb excess moisture.
Take a cap with a flamer or a needle and fix a handle for a milling handle in a holder. Turn on the device for small speeds. In parallel to the nail bed, the removal of the cuticle and phergy from the pocket. Do not drive the cutter right under the cuticle, but gradually move deeper and deeper. Do not try at the very beginning with great effort to put the deep cut. Thus, you can injure the cuticle or tear it off the nail bed, provoking the wound, as well as bleeding.
After this manipulation, the cuticle rises, becomes protruding. It can be removed with a cutter-shar. They come with diamond spraying or corundum. We recommend using diamond spraying at the initial stage. It is rude and allows you to remove large pieces of very dry cuticle, which has grown.
Corundine balls are used for final processing. Keep in mind that they are not drove along the nail bed with milling cutters, but they work exclusively in the cuticle.
In the area of \u200b\u200bthe side rollers, processing is also carried out using a milling cutter. After that, a file is taken and the free edge is processed with the appendix. If you are not going to make coating with gel polish, you can apply nutritious oil to the cuticle area. How to cover gel polish can be viewed here.
To avoid cuts, do not linger for a long time in one place. Try to work not quite chaotic, but according to a certain scheme. Otherwise, get a torn cuticle that will dry quickly. In such areas, burrs are often formed.
Poor mills come to this handle, so you may have to purchase new ones, in diamond spraying. To remove gel polish, an ideal option is a ceramic corn with a blue notch. There is no milling cutter in the kit, so it will have to be purchased separately. It is necessary to remove a dry cuticle.

How to make a European uneducated manicure at home?

This type of manicure is offered in salons. Basically, this manicure has gained popularity in Europe, since tools with cutting surfaces are practically not used to implement it.

Manipulation instructions:

Special organic acids are used, which are called biogel. In the course of manipulation, it is necessary to apply fruit acid into the cuticle area, as well as side rollers and withstand for 3 or 5 minutes, depending on the thickness of the cuticle and grooming of the nails. Further, with the help of an orange stick, a shovel -shaped side, it is necessary to push the cuticle and scrap it with a sharp edge.
Usually such a manicure is suitable if the nails are not very neglected. For the best effect, many recommend lowering their hands into a bath with warm water and wait for 5-10 minutes. Thus, the acid works better, and completely breaks down all the dead particles of the skin that remains to be cleaned with an orange stick.
If the cuticle is launched, it is very dry, there are coarse areas, burrs, in which case it is recommended to use combined manicure using organic acid, as well as bites and forceps. In order to remove coarse areas that resemble torn edges. After dry skin in the cuticle is put in order, it is necessary to process the end of the nail with a file for natural nails. Only after this is applied oil, if desired, the coating is performed.

Do not apply acid to damaged skin. If you thwarted the burr, and then applied acid, feel a burning sensation. A wound is formed in this place.

How to paint your nails?

There are many techniques. Now almost no one uses ordinary varnishes, but give preference to Shellak. Below is a varnish technique.

Video: How to apply varnish correctly?

Most often, a combined manicure is produced in the salons. The cuticle rises with a milling cutter, and then cut off with manicure scissors. This allows you to significantly save time.