How to make a basket of pine cones: step-by-step instructions, photos, master class. How to make a basket of spruce cones?

How to make a basket of pine cones: preparation of raw materials

First you need to pay attention to the preparation of raw materials, since you should not use freshly combined cones. In the autumn, they can be found under the leaves, but the main drawback is that they are wet and not open. If you glue them, then during operation, due to a rather high temperature, dry air, the basket is easily deformed, destroyed. That is why it is necessary to prepare cones. Freshly -shaped material must be spread on newspapers in the shade and let dry. On average, they dry for 2 weeks. Only after the opening of the cones can the design of the structure be carried out. 

How to make a basket of pine cones, preparation of raw materials:

• There is another method of preparation that allows you to create a basket of light raw materials. Pine cones themselves are distinguished by dark brown color with cream and white interspersed. Products made of light materials that do not exist in nature look rather unusual and interesting. 
• The bleach will help you create the desired color. Take the cheapest whiteness or chlorine lime, dilute 10%in a concentration. For about 8 hours, immerse the cones in the resulting solution. Thanks to this, all the dirt, as well as the main pigment is washed, and you will receive light raw materials at the exit. Remember that wet cones cannot be used for making crafts.
• They must be washed under a large amount of running water in order to get rid of the unpleasant odor. After that, it is worthwhile to spread the cones on a baking sheet and leave in the oven at a temperature of 60 degrees. The cones are kept at this temperature for 2 hours. Thus, all the water evaporates, and the cones become light and dry. Dark, dirty cones, as well as spoiled by pests, are not suitable for these purposes. 

Bump basket: master class

At the initial stage, it is necessary to make the base. To do this, prepare a ring from cardboard. Glue the cones along the perimeter of the ring. For these purposes, you can use an adhesive gun, or any glue, such as a “moment”, which is characterized by a high density, density. When the first row of cones is created, it is necessary to overlap the next one. 

Bill of cones, master class:

• It is best to use copper rollers, a wire without a braid. At the initial stage, it is necessary to pass the wire through the middle of the cone, connecting its edges. Another bump joins the tip, by wrapping it in the middle part, in the base area. Thus, it is necessary to combine approximately 12 cones. Please note that the outer part should be closed, place the bumps bottom up.
• So you will get a flat surface, not a relief. For the next circle, you will need 2 bumps less. Using such a technique, you need to make three or four rows, gradually reducing the number of cones by two. As a result, you will get an interesting, unusual design that resembles a segment of the pipe. It is necessary to arrange the bottom of the basket. Usually it is made of dense cardboard, which is glued to the lower row of cones.
• The pen is made according to the same technology as all rows, only a semicircle is made instead of a ring. It is attached to the base with wire. Next, you can start decorating the finished product. For these purposes, tapes, sparkles, beads or artificial flowers are usually used. You can fill the basket with moss, or artificial colors. It can also be used as a container, vases for fruits and sweets. 

How to make a basket of pine cones: step -by -step instructions

A basket of cones can be made on a round ball of foam. For this you will need the following tools: 

• 40 are disclosed cones
• Sisal
• Thermocles
• Foil
• Foam ball
• Wire
• Decor

How to make a basket of pine cones, step -by -step instructions:

• At the initial stage, you need to take foil and wrap the half of the foam ball. This is a kind of base or frame. In the process of connecting the cones, you do not need to remove foil from the ball. It is necessary that the base be quite dense, and allow you to glue cones with each other. 
• The work begins with the bottom of the ball. Put the base in a bowl to give stability. Now apply glue to the cone and attach it to the foil. Attach a few more cones to the foil, not forgetting to connect them among themselves. Please note that foil is a rather soft base that is easily torn and damaged. Therefore, the main task is to fasten the cones among themselves with the help of a thermoclay.
• Thus, they will not be collapsed after the base from the foam is removed.
• As soon as you gain the required number of rows, and the basket will acquire the shape of the half of the ball, let the glue dry. After that, carefully remove the foam base. You can remove the remains of foil. Start decorating the basket. Sisal, artificial flowers, ribbons or beads is suitable for these purposes. Make a pen if necessary. For reliable fastening of one glue is not enough. It is best to use wire or fishing line, in stages and connecting the cones among themselves. 

Please note, since the work is performed using the bumps on the bottom inside, between the elements the lumen in the foil will be visible. It does not look very aesthetic, but you should not worry. This area is usually decorated using sisal. These are thin, artificial, fir branches that give the tenderness and elegance of the finished craft.

DIY spruce cones basket for children: Instructions

Fir cones differ from pine size and quality. They are less durable, so ideal for children's crafts, which are decorative.

Do -it -yourself basket for children for children, instructions:

• To create a children's basket, you will need a cardboard base, you need to make a cylinder out of it. Take a dense sheet of cardboard, cut a long rectangle, connect the edges, glue the bottom.
• The result is something similar to a small bowl or saucepan. Decorate it with cirrier paper or felt. Glue spruce cones on top of the base. In the process, it will not be possible to use glue-pencil, as it is subtly applied. For these purposes, use glue in a pistol, or a moment. 
• Such a basket is rather a decorative or game option for a child. It is not possible to use it as a pot, for fruits, due to low functionality and low strength. 

Composition from cones in a basket: Features of manufacture

Kashpo baskets are very popular, which are used as a stand for flowers. To do this, you need a round base. It can be an ordinary balloon. Glue it with a standard cling film, and glue the cones on it. For the manufacture of such a basket, exclusively pine cones are used, since they are characterized by sufficient strength and size. Do not forget to fasten them with each other. The most durable options are considered on wire frames, where cones are interconnected using wire. 

Composition from cones in a basket, features of manufacture:

• For work, you can choose both pine and spruce cones. The main difference in their form, as well as strength. The spruce bump itself is oblong and has a cylindrical shape pointed at the end.
• Her scales are very thin, so they easily break. Accordingly, the fastening of such cones to each other is not very reliable. A good way of weaving for these cones is the use of wire and frame.
• For pine cones, the use of a wire frame is not necessary, since the scales are very dense and quite durable. They can be safely interconnected by glue. Pine cones differ in shape.
• They have in closed form an egg -shaped shape, when opening, scales remain dense, the seeds are scattered in the nearest areas. It is best to use pine cones for crafts due to their high strength. Fir cones are mainly used for decor. If you are going to use spruce cones, then it is best to use the frame connection technology. This will protect finished products from breakdowns and collapse. 

How to make a basket of cones: photo

It is best for crafts to choose elements of the same size and shape. Thus, finished products will seem the most harmonious, neat and beautiful.