How to beautifully sew knitted details with a hook and knitting needles? Knitted seams in the assembly of knitted products and ways to perform them with knitting needles and hook

How to beautifully sew knitted details with a hook and knitting needles? Knitted seams in the assembly of knitted products and ways to perform them with knitting needles and hook

The article describes how you can sew knitted products yourself. You will learn what a knitted seam is and how to make a seam manually.

If a jacket, sweater or other product is knitted, then, as a rule, this thing consists of several parts. They will subsequently need to be sewn. No matter how beautiful the craftswoman would not knit clothes, but with one inaccurate seam, you can ruin all efforts. Therefore, this procedure should be approached thoroughly. It is advisable to think in advance how at the end you will sew the details, what kind of seam to make it invisible.

What is a knitted seam, what are the types of knitted seams?

Knitted seam - used for products that have a feature to stretch. It is it that is used for knitted things. Thanks to the special stitching technique, it is practically not visible on the front surface of the knitted product. There are many techniques for performing it using various tools.

  • Invisible knitwear seam in horizontal performance.
  • Loop in a loop. Used to sew products connected by plate stitch and elastic bands of various configurations.
  • Vertical seam. This technique is suitable for various products (socks, hats, snoods, etc.)
  • Ketic seam. They are connected to the main product pockets, boxes, planks, etc.
Knitted seam
Knitted seam

IMPORTANT: To make the product neat, use the threads that you knitted.

How to sew knitted parts, a knitted canvas with an inconspicuous knitted seam with knitting needles?

You can do knitting needles seam loop into a loop in two performance. Immediately tie the two details of the cut or first remove the loops, and then sew it.

In the first case, do the following:

  1. Two knitting needles should have the same number of open loops
  2. You will also need a needle with a refitted thread
  3. After remove the loop from one needle to the needle and from the other knitting needles
  4. Pass the needle and fix the thread
  5. Then on the first knitting needle capture a bundle of a previously attached loop
  6. And take the needle in the loop of the same knitting needle
  7. Repeat the described in 5, 6 of the point on the second knitting needle
  8. And so to the end
  9. Fasten the last loops.
Knitting seam
Knitting seam

The second method is convenient if the product has not a large number of stitching loops. Otherwise, you can skip the loop and the appearance of a finished knitted thing will deteriorate.

Vertical knitted seam in knitting for connecting knitted parts, closing loops: diagram, description, video

How to close English gum with a knitted seam?

An ordinary English gum can be closed with a knitted seam using knitting needles. To do this, start to do the following:

  1. Stitch the first loop of the front.
  2. Remove her again on the same knitting needle, where she was before.
  3. If the wrong side will go further, then knit the two loops of the wrong side.
  4. Again, throw this loop on the knitting needle back and now knit the front two loops.
  5. So, knit in turn with the front, wrong loops of two loops until you tie the entire row.
Close the elastic band
Close the elastic band

How to close a double gum with a knitted seam?

Hind elastic band closes with a needle.

  1. First, make it that you get a knitting one front loop, one wrong side. More precisely, knit a row according to the scheme: Lp(front), IP(wrong side) and so on to the end of the row (plus two hem).
  2. Take a needle with a refined thread. Put it according to the scheme. Enter the needle up from you, as in the image in the first loop.
  3. Then in the second and return to the first. Next, grab the third, go back to the second, and immediately take the fourth.
  4. Do this weaving scheme with all the loops alternately.
Close a half elastic band
Close a half elastic band

To make it clearer, see the weaving scheme below in the figure:

Italian seam
Italian seam

What is the best way to close the gum 2x2 with a knitted seam?

This process is best done on knitting needles elastic knitted seam:

  1. If the elastic band goes in a circle, start closing it in front of two facial loops.
  2. First, make one cloak, knit a lp, the second knitting needle where the front was, insert in the cloak, prone the previous loop to them.
  3. Next, make a cloak in front of the wrong loop. Knit the wrong side right away.
  4. Then remove the cloak through the wrong loop with the other knitting needle.
  5. Take the second loop again on the extreme first.
  6. Again, make a cloak in front of the wrong loop, knit it and repeat the same thing that was done in the fifth paragraph.
  7. Now, according to this scheme, tie and all other loops of the elastic bands two by two.
Elastic seam for gum 2 on 2
Elastic seam for gum 2 on 2

Video: Closing the elastic band two on two elastic seam

How to sew a knitted hat with a knitted seam?

When you sew a knitted hat, be sure to put its edges evenly. In this case, you will get a coincidence of the knitting pattern and the seam will be practically not visible. It is better to use loops on the side sides vertical seam.

  • Wind the thread in the needle and on the wrong side, start work.
  • If the hat is tied with a panting viscous, then the thread needs to be extended with a Christmas tree so that the thread is pulled together by the only loops and does not differ from the main pattern.
Knitted hat with gate - sew the sides
Knitted hat with gate - sew sides

How to sew knitted snood with a knitted seam?

To connect the cord loops, you can apply a kettle suture. It is not at all difficult to make it. Enough to wean the edges. Enter the needle into the second, then the first loop. Then the third and again in the second. And so continue to the end. It turns out a loop seam. In addition, the snood can be sewn with a vertical seam, as described above, and a hook with a hook.

How to sew the edges of the snood?
How to sew the edges of the snood?

How to make a knitted seam manually with a needle?

You can manually connect parts with a needle using vertical, horizontal or keteling seam. To complete the procedure, it is necessary to take into account the product drawing, make sure that the details match. In addition, it is advisable not to go astray when you make stitches, to fulfill all the above instructions.

Sewing knitted parts with a needle
Sewing knitted parts with a needle

How to sew knitted parts with a knitted seam crochet?

Knitted items sewn by hook are very neat. Experienced craftswomen make a seam like machine. In order to achieve such a result, do the following:

  1. Fold two stitched parts - the front side to each other.
  2. In the first opening between the hinges, insert a hook. Make a loop out of the thread by knitting two parts of the knitted product.
  3. Then again insert the hook in the next opening, the mowing formed. Pull the loop again.
  4. Two loops will turn out on the hook, make one of them, knitting them.
  5. Again, insert the hook into the next row of loops of two halves of the parts and pull the loop.
  6. Two loopes again connect one. Knit so until you connect the details of the knitted product.
Crochet knitting
Crochet knitting

In fact, everything only seems that it is difficult to independently learn to make knitted seams. This is not so, it is enough to carefully read the order of action and put it into practice. Try and you will succeed.

Horizontal knitwear seam in knitting for connecting knitted parts, closing loops: diagram, description, video



Author:
Evaluate the article

Add a comment

Your e-mail will not be published. Mandatory fields are marked *