How and how to open the closed front and interior door of the apartment, at home without a key yourself if the door slammed, or forgot the keys: methods, advice. How to open the entrance metal, plastic, wooden door without damage if the lock is jammed, or broke?

In this article, we will consider how to open the door, if it slammed, the lock or key has broken.

When the key is lost or he just sees in the door, the main thing is not to be nervous and keep a sober look at the situation. There are no hopeless situations, however, you need to stock up on patience and some skills. They directly depend on the type of door itself and the castle design. Therefore, this article will give methods of opening various castles.

How and how to open a closed entrance and interior door without a key yourself if the door slammed or forgot, lost the keys: methods, advice

Each door has its own characteristics, and each lock has its own structure. So, it requires an attentive preliminary examination and an individual solution to the problem. The easiest way to open the interior door. But here they are more often slamming, although a similar function is also provided in the front doors. But you need to disassemble the problem in order.

Possible reasons for a slammed door:

• the most banal and quickly solved reason is the jamming of the tongue;
• or there is a jerk of a key;
• also, residents often complain of the wedge of latches;
• if the interior or front door has a bilateral lock, then the key left on the back will also prevent the door opening.
• or the most tragic reason is the breakdown of the key directly in the keyhole itself.

Important: try to put locks in interior doors so that it is possible to open them on the other side with the help of improvised means, for example, coins. Especially, this should be taken into account by parents, because children are very inquisitive by nature.

You need to fight the problem gradually.

• The first thing that is required of you is to calm down. Usually, a person who is nervous cannot come up with anything sensible, how to just take out the door. And this is not only a replacement of a new castle, with the door itself.
• If the tongue was stuck, then arm yourself with a plastic card. Or other similar item, the main thing is that it is fervor flat and dense enough. You can use the knife, only work with them carefully so as not to break it.
  • It is necessary to insert the card into the opening between the door and the lock, that is, between the box itself and the doorbell itself in the place where the lock is located.
  • It is not necessary to stick very deeply, and the movements themselves must be smooth. Meping the jerking tongue to the left - right or up - down. After such manipulations, he will begin to leave, simultaneously with these manipulations, open the door with a pen.
  • If the tongue has not succumbed, then arm yourself with a chisel. Actions are completely similar, but already with her more strength.

• If the key was on the keyat the same time, he does not turn or lean out, then use the WD-40 liquid. You can also use kerosene or ordinary sunflower oil, the main thing is to lubricate the opening of the lock. But turn the key no earlier than after 20-30 minutes. Also, if possible, clean the lock of all kinds of pollution and dust.
• Such a detail as a latch is not in all doors. To "dissect it" when the latch jammed, you need to twist the handle in different directions. If such simple manipulations did not help, then it is worth resorting to more radical methods.
  • Unscrew the pen. If there was no screwdriver at hand, then a knife or spoon, and even a nail file, will help.
  • Now the most complex and accurate process begins. With the help of a thin object (knitting needle, handle or sharpened pencil), you need to “move” the latch. To do this, insert the lock into the lock mechanism itself and tightly press, while the handle must be rotated in the direction of opening the doors.

Important: Sometimes the handles provide a special unlocking key of the mechanism. It is usually located below the handle in the form of a small hole. Sometimes it itself is clamped, especially if the door is very slamming. Again, arm yourself with a thin and long mechanism to squeeze this “button”. A spoke or a thin nail will be an ideal option, since the pen may not be reached to the mechanism itself.

• If there was a key from the other side, then the main task is to push it out. If you have only one in the kit, then be sure to take the newspaper. True, in this case, open the door will turn out only if there are no thresholds in the house.
  • This newspaper is laid out and placed under the handle from the other side. But in such a way that it can easily be pulled back. By the way, take into account the dimensions of the key and the lowest clearance. Although for interior doors they are made small and flat.
  • Again, take a thin, strong object to push the key. It can be the same spoke or a metal nail file. After he fell into the newspaper, pull it out of the door.

Important: sometimes the key remains in the closed room, for example, to show off on the nightstand. In such a situation, a knife or hairpin will be needed. It is necessary to insert the item into the opening of the castle, squeezing its elements. In this case, the handle must be rotated to turn the mechanism. Keep in mind that such a manipulation will need dexterity.

• And another option - the key in the castle broke. This situation seems to be the most deplorable, but, in fact, the door to open is easier. True, you need a file from a jigsaw.
  • Insert the file with teeth up next to the key, and turn all this design together.
  • If you want to save the lock, then hook the key with a jigsaw and abruptly pull it out of the castle. The procedure can be carried out several times.
  • Even easier if the key sticks out a little from the castle. It can be obtained using pliers or forceps. After that, the key is handed over to the workshop for the manufacture of duplicate. It will take longer than time, but it will be cheaper than changing the lock.

Important: first, the lock is lubricated with kerosene, machine oil, or at least sunflower oil. And it remains for 15-20 minutes, then it will be easier to work with it.

Recommendations that relate to the front doors. Below are the options for popular entrance door locks in detail, but simple methods of combating the locking of the castle are given to your attention.

• The first requires attention to the cross -shaped castle. It opens elementary, so extremely rarely use to protect your housing.
  • You need to take the simplest chewing gum. It is placed in the hole of the keyboard and turned several times with a screwdriver. The gum will take the form of a keyhole with all ledges and cavities, so it will easily open the door.
• The leaf lock often sees due to the jamming of the plate. By the way, it is quite popular among residents, because it has high reliability against hacking. Armed with a sufficiently strong wire. It is inserted into the keyhole and with smooth manipulations pushed the suvalds to its place. That is, they need to be “terminated” to crank the key and move.
• Sometimes the cause of the door leaf is still the reason. To do this, a wedge or flat screwdriver is inserted so as to level the door. In this case, take a handle to open the door.

A few tips on how to avoid slamming the door:

• Often the reason for this is the hit of foreign objects or simply dust. Castles sometimes need to be checked and cleaned, so you extend their service life and avoid such incidents.
• Be sure to lubricate with a special tool and do it regularly!
• The key itself can simply become unsuitable if it is not used for its intended purpose. Yes, this applies to opening beer bottles and other metal covers, tearing boxes or packages.
• If you pull the door handle too actively or openly open it, close the lock.
• Due to increased humidity, wooden canvases and the opening may increase. That is, expanding, they interfere with the normal operation of the castle.
• Do not clap hard the door. Otherwise, a skew of the door leaf can even occur or pins will fall from the mechanism and the key will be blocked.

How to open the input metal, plastic, wooden door without damage if the lock is jammed, or broke

In this paragraph, variants of various locks that can be in the front doors will be considered. Here, based on these characteristics, the castle is opened. All methods need to be used in such a way as to cause a minimum of harm to the turner and door. Therefore, start using increasing from the most gentle methods.

The metal door is how to approach it.

• Two items will be required - a paper clip and a hexagon. But what a hexagon - this is already necessary to select.
• The paper clip is introduced into the key opening above the key input. It is introduced to the sensation of the resistance of the keyboard. And with a clip, he moves aside as much as possible.
• Introduce a hexagon, and a paper clip move further until the next pin. The same manipulation is carried out. And so move to the very end. Until the door opens.

In the situation with the entrance doors, you already need to look more at the very reason for the problem, but at the design of the castle.

The simplest is a flat or round castle.

• If you need to open a round lock, again take a sharp, strong and long item. An ideal option will be an awl or a knitting needle, but an exposed clip is also suitable. Insert the selected object into the hole of the lock. Press with one hand, only without fanaticism, and the second - turn the door handle.
• To open a flat keyhole, you need to choose a suitable item in size. The most acceptable options are the tip of the scissors or a thin knife, a metal nail file or a small spoon. In the same way, you need to insert the object into the hole of the lock, slightly press on the mechanism and turn the handle.

A more complex and secret castle is a cylinder.

• In order to open it, two components will be required - a paper clip with a bent end in the form of a hook and a flat screwdriver bent at an angle of 45 °. This is a very painstaking process that can take even several hours of labor. Therefore, weigh your patience and nerves before starting work.
  • The screwdriver and the paper clip are inserted directly into the lock. All actions are carried out on their ears and eyes. The role of a buffet belongs to the screwdriver, but the clip will be an interpreting element.
  • The paper clip will need to be placed on each pin and put it in the desired position of the locking mechanism. The screwdriver must constantly carry out rotating manipulations to lead to the cylinder displacement.
• If you have surrendered your nerves or the castle began to make strange sounds, but did not succumb, resort to power methods. There is a way with drilling, but there is without it. In the second option, you need to take a flat and long screwdriver and a hammer again.
  • A screwdriver is placed in the larva and “driven” with a hammer as deep as possible. We put all the strength and scroll inside the screwdriver, and then remove it with the secret.
• In extreme cases, a drill is used, which is inserted into a larva and drills the whole secret to the very end. In this case, the castle must be replaced.

Important: some manufacturers make locks with special anti -icm protection, so knocking and drilling can simply be useless.

The rack castle is persistent against gross hacking, but with weak places.

• And this place is intellectual autopsy. The easiest way is the wedge. In the literal sense of the word, a small blade from soft rocks is taken and driven with a hammer with all its strength into the keyhole. After pulling it out, traces of the castle remain, so this wedge can be used as if a key.
• Another simple and fairly quick way is to use scrap. The door deviates as much as possible from the doorway, and a flat screwdriver is inserted into this gap. So it needs to be pushed back by the keyhole. By the way, such manipulations can be carried out using a paper clip or wire.
• This option is also a little painstaking, but productive. A thin and flat screwdriver is inserted into the valve, which to catch the crossbar. But the second screwdriver is clamped. And so in turn all the crossbars are captured until the door opens.
  • Important! Before any action, the castle necessarily treats liquidWD – 40.

How to open a leval castle.

This type of lock can also be persistent before any attempts to hack, so any manipulations will be useless.

• As in the case of a mechanical lock, you need two master keys. To do this, a knife or ruler is suitable, which is introduced to the stop into the keyhole itself. But with a hairpin or a paper clip, the correct position of the Suvald is selected.
  • This process can take a lot of time, especially with a beginner. With insufficient experience, the result can not be achieved at all.
• The second method has more guarantees, but in time not faster, and even you need to be extremely accurate. A drill and any master line (hook, paper clip, hairpin) will be required. Here the drill must be drilled strictly in the place where each of the Suvald is located.
  • When the supporting point of the mechanism is drilled, a bent stud or clip is inserted in the form of a hook and turned. At the same time, Suvald should move freely to the side.

What about hinged locks?Such a castle often simply breaks, because it is rarely selected as a “guard” for valuable things. Yes, and it has a small valuable category, plus it is easier to hack than to open it.

• Two wrench are taken. Each of them covers his own dope of the castle with “horns”. The main thing is that they are in contact, so choose the corresponding size. Now it remains to squeeze the free ends, which will lead to pulling out the arm of the castle.
• The second principle is similar to working with a plastic card, only for this a plate is used from a tin can or similar material. It is inserted and pushed into the hole between the lock of the lock and the closing hand.
• The last method requires the presence of a self -tapping screw and nails. Self -cutting screws up to the stop into the hole of the castle and pulls out.

If the plastic balcony door slammed or jammed or jammed:

• Sometimes you can correct the situation by loosening the clamp. This must be done with a hexagonal key on the hinges. But not on all plastic doors there is such an opportunity with a closed condition.
• Therefore, it is easier and faster to pull the double -glazed window. To do this, you need to insert a knife, pushing the plastic stacks. You need to start from the middle. When you push all the stacks, easily take out the double -glazed window.

Important: do not forget that it has a fairly large weight. Therefore, work and take it out very carefully so as not to damage and not lead to the formation of cracks.

• Then you can open the door from the back. If you need to insert the double -glazed window back, then put it on plastic gaskets. Put the stacks in place and forget them with a rubber hammer.

How to open the door with a hairpin or a paper clip?

In many films, the lock opens with a hairpin or paper clip. Yes, and everything is so simple at first glance that such a master class should be considered in more detail. This method is ideal for those who stayed in a dressing gown and homemade slippers in front of an accidentally slammed door. True, keep in mind that experience is needed even for such a simple way. And do not forget that each castle has its own characteristics, so not everyone can succumb to tricks or stilettos.

• Two paper clips or studs are taken. One of them needs to be completely straightened, and the second is the form of the letter "G". The first hairpin needs to be straightened to the middle. After that, it is inserted into the castle by just a couple of millimeters to bend a little. This will help to give the hairpin the form of the master line.

Important: there are rubber seals on studs or invisibility. Small round tips at the ends. This is necessary not to scratch the scalp. But in the castle they can cause even more breakdown or sealing. Be sure to delete them! This is easy to do with pliers if you have them at hand. But you can even cope with your teeth.

• Bend the free end of the stiletto the end of the hairpin in the middle, making a semblance of a handle out of it. This is not necessary, but thus, you will facilitate your job. And pressing, if necessary, it will be easier for you to make up. That is, it needs to be bent so that a small loop is obtained.
• You do not need to bend the second hairpin, bend it simply in half at right angles. G - introduce the figurative master line into the very bottom of the keyhole as deep as possible. It is necessary to introduce the middle, that is, the ends with rubber seals will be outside.
  • Then slightly turn to the stop in the direction in which the key usually turns. But without fanaticism, he must freely be in such a position. By the way, you need to hold a hairpin all the time.
• But in the upper part, a straight pin is inserted with a sliding movement. The curved end should look up! This is where dexterity and practice will be required, since the upper master line must be placed under the pins. That is, you will raise them with this hairpin.
• When you come across an obstacle, do manipulations up - down to catch the pin. Then, raise it up, the lower hairpin can be pushed deeper so that they do not fall into their original position.
  • So you need to do with each pin separately. And keep in mind that not everyone will be easy to succumb. Some will really resist a little, so be patient.

Important: listen carefully. If the pin coincides with the shape of the cylinder, then it will emit the appropriate click. Only after such a sound signal, proceed to other pins.

• Now very carefully! When the lower hairpin begins to turn, stop it and slowly remove the upper master line. Then continue to turn the hairpin until the lock is completely opened.
  • But in this case, a lot of patience and some dexterity will be required. You cannot crush too much, since the lock mechanism itself will be damaged. That is, the pins can simply "sit down". And then it will not be possible to open the door at all.
  • And if you are too delay, then the pins can slip back and you will have to carry out the entire algorithm of action again. Therefore, act smoothly until the obstacle appears, and then add a little strength. After acting again gradually.

Important: this method is suitable for opening hinged and simple castles! For complex mechanisms, this method will be useless. And do not get involved in the training of opening the castle - this will lead to a quick breakdown of the mechanism itself.

How to call the door to open the door?

Not always independent opening of the doors, especially input, metal, ends with a victory. And if you also have a castle with protection against hacking, then it makes sense to even try to open the door with improvised means. And, in general, the opening of the doors is a whole art. A small inaccurate movement can cause the failure of the entire painstaking process.

• Calling the opening master of the castle today is not so problematic. More precisely, there are a lot of similar companies, only your region must be taken into account. Since they work in the city or in the region.
• The phone number can be found on the Internet without problems, just do not forget to indicate the city or region. The algorithm is a little similar to a taxi call, only the room is a little longer. The operator after the call calls you back and clarifies all the necessary information.
• The arrival of specialists takes no more than an hour. If the trip is around the city and without traffic jams, it can be reduced to 15-20 minutes.

• Masters work with special tools, which ensures the integrity of the door leaf. Not always, but often even the integrity of the protective mechanism itself is also preserved.
• Experts will begin to work only after confirming that this is your housing. Therefore, be prepared to submit documents confirming your identity and the fact that you are the owner of the apartment.
• But, if you rent housing, then you will need to contact directly with the owner of the housing. Neighbors can also confirm your residence at this address.

Important: if you did not have documents with you, then a district police officer is necessarily called. He can also confirm your accommodation, but the door will only open in his presence!

• If we talk about the cost, then in this matter it all depends on the complexity of the work done. By the way, do not think that in another city they will come to you for free. The road will also be taken into account.
  • on average, about 700-900 rubles will need to be paid for the autopsy of the domestic castle.
  • For an imported castle, the price will be at least 1,500 rubles.
  • If the door is also equipped with other protective mechanisms, then its opening will start from 2000 rubles.

You should also know that such services work around the clock, so they will be able to help you at any time of the day. By the way, you can order a call of specialists not only by phone, but also online.

Video: 5 ways to open a door without a key