What needs to be done so that the spinner spins faster and longer?

In order for the spinner to spin faster and longer, you need to properly care for the bearing. What will we talk about today in this article.

Now at the peak of popularity there is a spinner, which belongs to the type of anti -stress toys. But the youth and the children saw in such a toy just, on the contrary, the subject of competition. After all, they need to find out who spinner is spinning faster and longer. And, unfortunately, sometimes the speed of even the most fashionable spinner decreases over time. And how to avoid this, let's talk in this material.

What needs to be done so that the spinner spins faster and longer?

When you get used to a certain thing, even though it is a toy, you don’t want to part with it, even when it is already starting to work not so efficiently. And this happens with the spinner, which was spinning well and for a long time, and then the mechanism strayed. And you must admit, the poor work of Spinner begins to nervous. Therefore, it is worth stocking up with a few tricks that will make the spinner spin faster and longer, and better than the previous effect.

Important: it was the idea of \u200b\u200breassuring a person in a stressful situation that was laid as a basis when creating a spinner. The soothing effect of this toy manifests itself precisely during twisting. After all, a person is interested in accelerating the speed of twisting, and therefore is distracted from everyday problems. Therefore, it is so important that the spinner spin quickly and for a long time.

How to clean the spinner so that it spin faster and longer?

The work of the spinner consists precisely in its device, and it consists of a disguised bearing and wings. It is worth lightly pushing the wing, and it begins to gain momentum. In general, it was determined that an ordinary spinner made of plastic should spin up to 30 seconds. Of course, a spinner with a bearing that is covered with ceramics can spin up to 2 minutes, and a metal toy - even longer. But, in general, it all depends on the quality of the toy and the ability to respond with a hand to the turns.

• To begin with, we offer an easy way of resuscitation. You can lightly knock the wings of the spinner in an upright position on some surface. Perhaps the particles of garbage, which got inside, interfere with the overall work of all parts. Knock prayer, because you can break the toy, and then you certainly have to buy a new one.
• Capital spinner cleaning It consists in getting rid of dirt and dust. After all, they, getting inside the toy, significantly slow down the movement of the bearing. However, the spinner also needs to be disassembled correctly so as not to be left without it.
• To do this, remove the lid on the average rotating element. This, let's say, is Spinner's heart. The top of the lid must be fixed with your fingers, but the bottom - start to rotate counterclockwise. Sometimes it can be fixed with magnets, so you only need to give a screwdriver. Just do it carefully so as not to break it.
• It is advisable to pull the bearing itself. If there is no such opportunity, then use the solvents with caution. After all, certain aggressive substances can be corroded in the literal sense of the word, for example, plastic. Therefore, it is only suitable alcohol. For better cleaning, the bearing needs to be removed, only gently pushing the knife with the blade or the tip of the screwdriver.
• Also, pry and remove the anthers on both sides, if you have one.

Important: if the bearing is fixed with sealant, then do not even try to pick it out. After all, then it will be impossible to insert it back.

• Now the bearing needs to be cleaned well. Take it for this any solvent, gasoline or kerosene. Suitable also Just soapy water. If you work with aggressive components, then put on gloves in your hands. Set the spinner into any liquid and scroll in different directions several times.
• Now arm yourself with an old toothbrush to carefully clean the element. If necessary, to get to the smallest cracks, use a syringe with a needle with which you will rinse the bearing.
• After this procedure is necessary rinse the bearing well under running water. But only under cold or cool, otherwise the bearing quality will worsen and it will fail faster. Also, just rotate under running water in different directions for a minute.
• Dry the bearing only with a hairdryer With cool air and not at the most maximum power. This will help to avoid the appearance of rust. But a rag is not particularly desirable to wipe it, because its miniature villi can fall between the details and worsen the work of rotation. Therefore, you may not achieve the main goal - that the spinner spin faster and longer.
• After that, you need to insert it into place and close it with dustings and lids to avoid further dirt and dust. By the way, it is still necessary to wash them periodically. After that, the spinner will spin faster and longer, even better than the previous one.

How to properly care for the spinner so that it spins faster and longer?

• Check the oil level in the spinner bearing. The work is affected not only by the lack of lubrication, but also by its excess amount. If an unnecessary amount of lubrication is detected, it just needs to be removed. But with a lack of oil, on the contrary, lubricate.
• There is still a small catch here - Without lubrication, the spinner spins faster and longer, but the mechanism itself will be wiser faster. And it will already be needed to replace the entire bearing. Grease the spinner: you can:
  • grease WD-40;
  • synthetic silicone oil;
  • machine oil.
• But do not forget that new spinners are sold with grease. Therefore, if you want your spinner to spin faster and longer, then immediately remove it.
• If you started to hear unusual hum During the twisting of the spinner, which was not there before, then, most likely, the reason lies in the bearing itself. You need to check it. Perhaps the bearing has already been erased and requires replacement.
• And perhaps simple the bearing balls flew out, and they just need to be returned to its original position. You can do this with tweezers.
• Check, whether the bearing was oxidized. If so, then you need to replace it. And the spinner will start again at a new speed.

• Check spinner for cracks. Unfortunately, they are not amenable to repair, so the spinners need to be treated carefully. After all, they are easily amenable to mechanical damage.
• Sometimes the spinner spin for a long time and quickly The backlash interferes. If you notice such, then it is worth inserting a small piece of tape between the details of the bearing itself in order to increase the rate of contact.
• But sometimes it happens that, on the contrary, a great compression interferes with the speed of rotation. In this case, you just need to rinse and lubricate well.

Apparently, that the spinner spin faster and longer, you need to take care of it and clean it in time. It is also worth it to treat him carefully, because wearing in a pocket, where even small garbage can be, will not affect its speed and rotation time.

Video: How to make the spinner spin faster and longer?