What can be done from old mink hats: ideas, examples, photos

In this article we will talk about how to sew modern and stylish things, jewelry, accessories from old mink hats, which can then be used for their intended purpose. They will also decorate your image and give it some notes of individuality.

When the mink hat has already lost its appearance or went out of fashion, do not rush to throw it. After all, the fur can come in handy. And if there are still many mink hats, then even more so, you can sew many interesting things not only of things, but also of crafts, different accessories, jewelry. It is about what can be made from old mink caps and will be discussed. Surely in many houses, housewives have these hats, and so that the moth does not eat fur, it is worth hasty to redo the hats in the necessary things and use them.

What can be done from old mink hats: mink headphones

Old fur things are found in almost any house. As a rule, they do not find special application, because they are most often idle. But you can also make something out of old fur hats. So these things will serve you for more than one year in a different form.

In online stores, you can buy different fashion accessories. And few people think that you can easily make the same products at home. Only for this you will need a little patience and skill, and of course the material. Stylish furs headphones will be an excellent decoration for you. They are especially relevant in the offseason. With such accessories you can replace the headdress, and your ears will be warm.

Sewing is very simple. It will be enough for you to take old headphones. And sheathe them with a mink, and you can sheathe an arc with a skin or tie a strip on it, as in the figure above, and then sew right on the arc with threads so that it holds tightly.

IMPORTANT: The fur for the ears must be cut carefully with a special cutter from the inside. After it is sewn, while the foxes should not be captured, otherwise the seam will stand out.

What can be done from old mink hats: fur coating

Needlewomen and fashionistas are ready to make different stylish little things and even accessories for shoes from old mink hats. Soft warm ugg boots, lined with mink, will warm the legs even in severe cold. And this does not take a lot of time, you will just have to take your uggs and decorate with beautiful fur. True, one hat will not be enough for this. You will need several old hats at once.

It is not difficult to make an accessory on boots. First, spread the lining from the hat, then cut the rectangle. Only the dimensions of this rectangle should coincide with the size of the upper part of the boots. Further, simply coordinate the top of the shoes with these pieces of mink. You can also make pompons from mink, sew flowers. You will get a great option for boots. Moreover, they will be very successfully combined with a fur coat, winter coat or down jacket.

It is interesting that you can sheathe minks from hats from hats not only ugg boots, but also other boots, it will look just wonderful. And leather inserts, flowers sewn from fur and other accessories are also used as jewelry.

What can be done from old mink hats: a fur beret, pattern diagram

From several hats, you can sew a beautiful mink beret. And making it from old mink hats is not difficult. The technology of sewing the product does not differ much with sewing hats, caps, etc., the only thing that different is a pattern.

So, for sewing the beret will be needed:

• mink skin from old hats
• syntipon insulation
• the fabric is lining
• scissors, clerical knife
• threads
• needle.

Production process:

1. On paper, draw a pattern of beret parts. Given the size of the head, then cut it out, carefully study where you need to draw two details where you need to make a fold.
2. Transfer the pattern from paper to insulation, lining fabric and mink bumps from hats. At the same time, do not forget to make small stocks for seams on all these materials.
3. After that, it remains only to sew all the details of the cut of all three types of materials.
4. Next, place a synthetic winterizer inside the fur base of the beret, then fix it on the fur with an invisible seam so that the material does not glide and cringe subsequently.
5. At the end, sew the lining to the beret. Make sure that the place of the line does not protrude beyond the edges of the cap.

After the operations performed, take a spray gun, soak it with a liquid very little. In order for the product to get the correct shape, put it on a block carved in the form of a cylinder. Let it take it dry there, thanks to this it will look like a store.

Scheme of the pattern of a fur beret:

The scheme-output shows that the headdress consists of five details. There are: bottom, two rims and two rounded details that are sewn directly to the bottom. When sewing the product, you can easily either expand the sides or reduce. You can perform the cut of the product to your taste.  

For decoration, you can sew a bow of leather or a beautiful flower, as presented below in the text.

You can also sew pieces of mug skins to the palantine, as in the figure below, and you will get a pretty scarf, which will be appropriate for the winter jacket, down jacket, and under a chic mink coat or coat with the same collar.

As you can see, if you make a minimum of effort and maximum imagination, then other hats that are relevant this season can be made of old hats.

What can be done from old mink hats: how to sew mittens?

What else can be made from old mink hats so that they do not take up much space in the closet. In addition to hats and all kinds of mink decorations, it will not be difficult to sew mittens. Moreover, they are not so cheap in stores, but they look stylish and you can say wonderful.

In order not to "go broke" on the purchase of this accessory, it is better to sew it on your own. To do this, use the following tools and materials:

• old hats
• lining fabric, better fleece
• special office knife
• scissors, threads, needle
• cute accessories for jewelry
• paste so as not to sink your fingers.

Operating procedure:

1. Draw a pattern of mittens on millimeter paper. Sizes need to be substituted. After all, each has a different length of the fingers and the width of the palms. Still keep in mind that the mittens do not completely fit your hand.
2. Cut the drawn details of the cut of mittens and transfer them to the fabric and lining. Moreover, make mittens in a mirror display on the right and left hand.
3. Do not forget to leave small allowances on the seams.
4. In order for the mitte to hold on the hand, the elastic band is sewn on the arm or the insert from the fabric is made inside, after which the tape is tightened inside, and its edges can be decorated with bells for beauty.
5. Now it remains to sew two mittens and two lining fabrics. After that, the lining is sewn to the fur part and it is thoroughly straightened, as well as the thumb of the lining fabric should be placed in the fur part of the product.

The mittens are sewn from different mink colors, you can also combine the tones of products, well -chosen tonalities look wonderful.

What can be done from old mink hats: DIY crafts, photo

Cuts of minks are of different colors, because the same craft made by yourself from the proposed below will look different. And what can be done from old mink hats is better to decide. Next, you will see examples of the work of masters, for sewing products from fur. Based on the proposed options, you can come up with your own, and use the fur and pretty jewelry in the case.

What can be done from old mink caps: making a bag

If you have several mink hats, then you can sew a beautiful bag with various decorations from them. Thanks to this accessory, you will stand out from the crowd, because you will have your own individual product design. What bag to sew it up to you. Below will be offered a variant of a large bag, in which you can put not only a smartphone, wallet, a cosmetic bag, but also many more objects necessary for ladies. As you can see, you can make many interesting, useful and stylish things out of old mink hats.

The pattern of the bag for the bag is provided below. In order to sew the product, in addition to fur hats, you will need a lining and substrates made of solid material so that the bag holds its shape in the future.

Fur bag:

Materials and tools:

• mink caps
• lining
• leather
• scissors
• chalk.

Principle of operation:

1. After you draw a pattern, cut the cut parts and transfer them to the skins and lining. Mandatory allow for the seams.
2. Next, sew the lining fabric and mink skins. Inward, sew the hard linings that will keep the shape.
3. Then sew handles, accessories for decoration and lining.

The finished product is suitable for a fur coat and any winter clothes, the main thing is to be able to combine it with things. A small detail in the form of an accessory will only decorate your onion.

Video: What can be done from old mink hats - how to connect a new mink hat?