DIY Bracelet Bracelet: 7 of the most popular schemes, instructions

If a person hears the word "bracelet" in his mind, pictures with elegant accessories pop up. However, bracelets made of paracord have nothing to do with such jewelry.

Paracord bracelets are designed for travelers who prefer hiking. It can also be worn by people who prefer unusual styles in clothes (country, safari, grunge, etc.). If you want to know how to make a beautiful bracelet from a paracord, carefully read this article.

Features of a paracord bracelet - how to choose a quality lace?

• In ordinary life, you definitely met a paracord bracelet - a nylon lace. It used to be used in the production of parachute slings. Now he is known not only to ordinary civilian people, but also by the military. Despite its smoothness and elasticity, the lace is quite durable, and does not break.
• The lace of several threads that are intertwined with each other consists. Inside the lace there is a core, which also consists of a large number of threads. It is used for repair work of shoes and clothing, for attaching equipment.
• People who often travel came up with how to make a beautiful and multifunctional decoration. In difficult situations, they plunge it, and use the lace for its intended purpose.

There are people who prefer to buy ready -made survival bracelets from the paracord in extreme conditions.

To recognize the original product, adhere to such recommendations:

• Touch the bracelet. To the touch it should be soft and elastic;
• Bather the edge of the product. If smoke with the smell of burning wiring appears, it means a bracelet made of a high -quality lace;
• Inspect the cut. The core does not cope with the shell in a high -quality paracord, but burns separately.

How to weave a bracelet from a paracord: weaving schemes

There is a huge number of schemes for weaving a bracelet from a paracord. You can choose the one that is easier. It all depends on your weaving abilities.

To weave a bracelet, prepare such tools and materials:

• Lace. For one bracelet, only 1 m of the product is enough;
• Scissors to cut the remains;
• Matches or lighter;
• Plastic clamp.

How to make a bracelet a snake from a paracord?

If you decide to work according to this scheme, adhere to step -by -step instructions:

1. Fold the lace in half. Pull it through the inner part of the fastener. The loop should form.
2. Pass the free ends through the loop that was formed earlier, and tighten. You should get the first knot.
3. Put on another latch, and measure the size of the wrist.
4. Start creating the main nodes that will form a pattern. Choose the main thread with which you will work. Tie it segments of the paracord. First, stretch it from the bottom up on one segment, and a friend from top to bottom.
5. Repeat the equipment as many times as you need to get a ready -made bracelet.
6. Pull the segments of the paracord through the last latch, and tighten it. Warm the ends with a lighter or matches so that they are fixed.

Army bracelets are made using the same technology. You can make a beautiful and universal gift for a man who loves to travel, or often goes to tasks.

Weaving cobra bracelet from paracord

Use the following instructions:

1. Fold the segment in half, and make a knot around the fastener.
2. Measure the length of the lace so that it corresponds to the length of the wrist. Wrap the ends around the second latch.
3. Get weaving. Put the rope on the left on top of the working cord. Turn both segments of the rope so that the loop is obtained.
4. Wrap the right segment around the left, and tighten the end of the left segment into the loop from the bottom up. Pull the ends to form a knot.
5. Put the right segment on top of the product, and throw the left over it. Skip the working thread through the loop, from the bottom up.
6. Repeat the technique until the bracelet is formed.
7. Turn the product in the back of the product, and repeat the weaving on top of the first layer.
8. Cut and set fire to the edges of the lace so that they do not bloom.

Video: Cobra weaving technique

Fish tail technique

If you liked this option for making a bracelet from a paracord, adhere to the following instructions:

1. Prepare 2 laces. Leave one of them even, and make a loop from the other. Put it under the bottom of the first cord. Pass the ends of the thread into the loop, wrapping the first cord, and form a knot.
2. Dilute the ends of both laces in different directions. Pull one thread so that it turns out a small loop.
3. Pull the left thread under the right. Put the right cord on top of the left. Carry the same procedure on the right. Repeat the actions until you get the required length.
4. Tighten the weaving so that the shape is noticeable.
5. Make a knot from the tips, and pass it through the loop. It will be a kind of fastener.

Simple bracelet in the technique of "Laedener"

If you want to make a paracord bracelet with this method, adhere to the instructions:

1. Pull the paracord through the inner part of the fastener, and form a loop.
2. Pass the opposite ends of the thread into the second latch.
3. Add another in a working thread - a brighter color. Pull one end with the first thread over the lower segments of the main cord, and the second - from below. An additional lace should handle two lower threads.
4. Pass the left thread into the formed loop, and then the right one. Tighten the knot and straighten the ends.
5. Repeat the actions until the bracelet is ready.

Technician "Chain mail"

If you decide to make such technologies, prepare 3 paracords of different colors.

Step-by-step instruction:

1. Twist two laces so that the loops are obtained. Pass both loops through each other.
2. Pass the ends of one thread through both loops, and pull. The knot will turn out.
3. Add the third thread to the woven. Pass one edge through both loops on the left, and the second - on the right. Spread the knot and tighten it.
4. Weave the extreme threads on top of the rest of the segments, and pull each thread through the loop. So a beautiful and reliable node will be formed.
5. Repeat the procedure until the bracelet is ready.
6. Take a fastener on the remaining segments, and fix it.

How to make a paracord bracelet using the "shark tooth" technique?

To make an accessory in this style, prepare 1 paracord and 2 latches.

Step -by -step weaving instruction:

1. Form a loop from the lace, and pass it through one of the latches. Tighten the structure.
2. Pull the laces through the clasp on the back.
3. The tip of the cord, which on the right, stretch between the other two, and make a loop.
4. Extend the left segment in the same way, and pass through the loop of the right thread (from the bottom up). Tighten the knot.
5. Adhere to the same technology and complete the bracelet.

How to make a bracelet from a paracord technique "centipede"?

The peculiarity of this technique is that the bracelet can be easily shut up, and use the paracord at the right time.

Step -by -step weaving instruction:

1. Pull 2 \u200b\u200blaces through the clasp.
2. Fold the extreme right thread in a loop, and lay on top of the middle laces. Wrap the loop around them, and tighten the knot. Repeat the procedure with the left thread.
3. Tie the middle with your right thread, draw its loop, and make a knot. Repeat the work with the left thread.
4. Repeat the procedure until the end of weaving.

The choice of fasteners for a paracord bracelet

To fix the design well, use such types of fasteners:

• fastxes. They can be made of plastic or metal;
• carbines;
• rings;
• beads.

Often people use to fix bolts. You can also do without a fastener. The paracord bracelet has strong nodes that form during weaving. Fastxes are often used. They are made in the form of a trident. The advantage is that it is not difficult to tighten and unfasten them. If you want to diversify your image in the city, you can use beads or anchors.

• People who have tried to create such products say that there is nothing complicated. The main thing is to start.
• If you successfully form the first node, then further work is performed in one breath.
• If you make several bracelets, then fill your hand, and you can weave accessories in just 10-15 minutes.

If you are only trying to weave bracelets, use simple methods - a snake or a cobra. Put complex techniques for later. Otherwise, you will make a large number of mistakes, which will lead to nerves, and completely stop doing such a hobby.

We will tell you how you can do it yourself:

• Bee's suit
• Clown costume
• Carnival costume raven for girls and raven
• A basket for toys
• Christmas tree on the wall

Video: weaving jewelry and survival subject