Nail rubs: species. Nail design with rubbing. Overview of the most popular guts on Aliexpress

Nail design with rubbing.

Masters of manicure and home users adore a variety of materials to create new interesting and unusual designs. And in this they are helped by manufacturers of materials for the nail service. In 2016, the so -called rubbing appeared for the first time. In this article, we will tell you which of the guts are the best and consider the main design options with them.

Nail rubs: views

Rubber is nothing more than a pigment made of polyester. The name of the material comes from the method of using this design. That is, it is rubbed into the nail with a finger or a special brush, a cannon, a soft sponge. The very first appeared materials with a mirror or metallic shine.

It was the 2016 trend. The so -called metal pigments did this perfectly. There were pigments of various colors and shades. There are several options for powder, they are used completely differently and look unusual, interesting. Suitable for creating a huge number of designs and manicure.

Types of rubs:

• Mirror, that is, with a metallic shine
• Holographic
• Soft marshmallow or marmalade
• Pearl
• Northern lights or May beetle
• Magnetic
• Yuki flakes

With the development of the nail service, new options for pigments may appear. The most popular at the moment are pearl powders that give the nails of a unique pearl shine. Even the most pastel and ordinary plain varnish will shine differently if you use such a pigment.

Materials with a prism, that is, with a holographic tint, have small grinding and shine with various colors, depending on lighting. This is due to a certain form of the prism. The northern lights or the May beetle are not monophonic pigments, but the materials that shimmer in different colors depending on the lighting. Now the chimneys and pearl flakes are as popular as possible.

Not so long ago, magnetic materials appeared on sale that allow you to forget about the use of magnetic varnish. Using them is quite simple, they are interfered with a small amount of finish. You need to stir with a brush and apply to nails. After that, a magnet is installed close to the nail for 10 seconds. This attracts magnetic particles in the composition of the rubs, and beautiful, unusual glare appears, as when using a cat's eye.

The main advantage of such powders is that they are much cheaper than gel polish with a magnetic effect. About 2 times their price is below the cheapest cat's eye. They react much better to magnets than many of the ready-made gel polishes with a magnetic effect. The pearl powder is a very small powder of white color, which, when applied, gives it with blue or whitish tint, like a real pearl.

How to use rubbing?

There are many use options that depend on the design. Pearl powders, as well as the pigments of the May beetle, usually rub into the finish without residual dispersion. Please note that some decor options can be applied with bald spots.

This happens if you save material and apply a very thin layer of powder. If this happens, it is better to replace the usual sponge with a silicone hoof. Thus, the powder will better fall on the nails without bald spots. If this happened, and in no way the powder does not rub into this area, it is best to block the nails with the finish and repeat the procedure. That is, to apply the second layer of pigment, which will most likely fall completely without prophesis.

This happens if you apply the material to cold or old top. Forbid customers or if you do yourself, touch the nails of hair, coatings or fingers. So that there are no fat spots. It is these fat areas on the nails that prevent the normal application of powder.

Instructions for using the screws:

• It is necessary to prepare nails in a standard way, because for applying gel polish. That is, the cuticle is cut off, shine from the nail is removed, a degreaser, a primer, a base that is dried in a lamp, and two layers of colored gel polish are applied. Most often, white or black gel polish as a basis is used. Sometimes they experiment with flower beds. After that, a thin layer of the finish line without dispersion is applied, dried in a lamp until completely dry and polymerization.
• Until the surface has cooled down, but hot, using a brush or sponge, a small amount of powder with rubbing movements is applied. After that, using a buff, you need to walk along the tips of the nail, remove the remains. This is due to the fact that the pigment, along with the finish, does not utter from the ends. Next, everything is sealed under the thick layer of the finish line, and dried. In this way, pearl powder, May beetle and holographic are rubbed.
• Materials such as magnetic powder, Yuki flakes rubbed a little differently. Yuki flakes are usually applied with driving movements to the finish line with dispersion, and after that they are overlapped with another layer of finish. Then the dispersion is removed. Magnetic powders can be rubbed into the dispersed layer, but in this case they are poorly magnetized with the use of a magnetic stick.
• It is best to stir such a rock with a small amount of the finish and apply with a brush, just like a magnetic gel polish. After that, they act on a thin layer of coating with a magnet and sent to dry into the lamp. They pass through the ends with a buff, overlapping a thick layer of the finish.

Please note that the powders themselves are quite poorly held. Therefore, if you do not adhere to a certain application technique, in just a few days you will receive shabby nails. In order to prevent this from happening, use a very thick finish without dispersion under the design.

After application, it is imperative to pass along the edges of the nail with a soft buff or a file in order to remove particles of rub. Only after that you can overlap with the finish with the obligatory sealing of the ends. For even greater reliability, we recommend that in two layers overlap the powder with a finish with dispersion. It is best if it is rubber.

Overview of the most popular guts on Aliexpress

Catalog with rubbing on Aliexpress can be found here.

Review:

1. Vtirka Diy Nail. It is nothing more than Yuki flakes. It is applied both to the dispersion and without it. Without dispersion, Yuki's flakes rub into a beautiful shiny coating. If the residual stickiness, this will add a small accent and achieve the effect of foil.

   

2. Shimmer Shimmer vtirkafor the gradient. This is a whole set of pigments that help to greatly simplify the creation of a gradient. They are ordinary colored pigments that are applied with a brush on dry gel polish. Thanks to such a stretch, it is possible to achieve a perfectly even and beautiful gradient, which significantly facilitates the process of creating nail design.

   

3. Manzilin. This is a standard mirror powder. There are several colors on sale: purple, orange, gold, as well as burgundy. This is a kind of metal pigment.

   

4. Verntion. This is a chrome powder, which gives the nails of a metallic shine. According to buyers, it is well applied, but it gives not a mirror effect, but a holographic shine.

   

5. Bling Galaxi. Such a gut is a holographic shine. This powder lies with rather large pieces, can be rubbed both into a dispersion and in the just dried top without residual stickiness. Thanks to this, you can vary a variety of effects.

   

Nail design with rubbings

There are many options for using a variety of powders. It all depends on your desire, here we will give some interesting, unusual ways to use the material. Most often, to give an accent, the powder can be rubbed into pastel varnish. But this is not necessary. Only a few nails can be distinguished, for example, on the ring and middle finger. After blocking the top above, you can apply stamping, or make a drawing.

Monograms on matte top with rubbing

Such powders look very good with a variety of stones and a matte top. If you want to draw some details and make them shiny with powder, in which case you need to follow the instructions.

Instructions:

• To do this, the nail is prepared in a standard way, overlapped with colored varnish, dried and overlapped with a top. After that, a sticky layer is removed, if it is, and gloss is removed with a buff.
• After that, a drawing is made with a paint without a sticky layer, dried in a lamp and a powder is applied. Thus, it lasts only in those details that were painted and dried in a lamp. The pigment is not applied to the matte coating, it simply does not stick to it.
• After that, the remaining residues is brushed with a soft brush and overlapped if necessary with a glossy top or left as it is. If you want the coating to be matte, instead of Bafy, you can simply use a matte top. The powder also practically does not rub in it.

Drops on matte top

We present an interesting, unusual design that can be created using rubs.

Instructions:

• To do this, prepare nails, apply two layers of colored gel polish on them and block with a top without a sticky layer
• Next, the powder is applied, and after that it is not fixed. Volumetric points are placed with a thick top or sculptural gel
• Everything dries in a lamp, try to put points one at a time so that the volume and sufficient height of the droplets are preserved
• Everything is listened to in the lamp and with the help of a cotton pad dipped in a degreaser or wedges, a sticky layer is removed
• Thus, the powder, which was not fixed using the top, will remain on a cotton pad
• And the shiny areas that are covered with droplets will remain under them
• It turns out to create an interesting and unusual design. Thus, you can create a variety of drawings
• If desired, those areas that remained not blocked by the pigment can be blocked with a matte top

French manicure rubbed

Oddly enough, but with the help of rubber, you can also make a metal French manicure.

Instructions:

• For this, the nails are overlapped by two layers of any flower garden that you have chosen
• A matte top is applied, listened in a lamp, a dispersion is removed if it is
• The smile line is blocked by a glossy top without a sticky layer, dried, and while the top is still hot, powder is applied
• With the help of a soft brush, residues are removed that do not stick to a matte top
• The entire design is overlapped with a glossy or matte finish. If desired, the pigment will only remain on the smile line, which was formed by a glossy top without dispersion

Photo design of nails with rubbings

In addition, the rubbing can be used very unusual. It is often mixed with a glossy top, used instead of gel paint for drawing. It turns out a very unusual, beautiful, shimmer effect with a variety of sparkles and beautiful transfusion.

You can apply powder after drawing monograms, some twigs. To do this, at the final stage of the creation of the design, with the help of gel paint they draw a monogram. And while it is still wet, sprinkled with a pigment. After that, dried in a lamp. It is best to do this on a matte top, on which steel powder does not stick. And only the one that fell on a wet gel painting is imprinted. After that, it is necessary to block everything with the top, or use the paint without a sticky layer. In this case, you will get an interesting, unusual design with a flickering brilliance.

Yuki flakes can be used for stretching or the so -called brilliant gradient. It is quite simple to do. To do this, at the final stage of creating a manicure, directly in the top with a sticky layer, without removing it, with the help of a brush, driving movements are applied to the Yuki flakes into the cuticle area, and there are practically no shine at the free edge of the shine. That is, its number will gradually decrease from cuticle to a free edge.

As you can see, manicure options are an unlimited amount directly proportional to your imagination.

Video: Nail rubbing