Women's sweater two -color with gloss effect, openwork, with a captive net, jumper, pulver: knitting pattern, description, photo

In this article, we will consider ideas for creating a beautiful sweater crocheted. We will also offer you detailed schemes and a description to simplify the work.

Content

A sweater is warm clothing that has a high neck, but there are no fasteners on it. But people very often call a sweater a sweater or pulver. In fact, these things are also considered a sweater, only they have no neck. A female crochet sweater is very rarely knitted, since a feature of this product is a rather high density and pattern.

Be that as it may, today there are a huge number of options that require these qualities. For example, openwork sweaters made of mohair or angora yarn. In this article we will get acquainted with the methods of knitting a female sweater.

Crochet female sweater: Choosing a picture

The sweater made by knitting needles looks more familiar than the product connected by crochet. In addition, the canvas of such a model is considered softer. But it is also possible to make a sweater with a hook. If you have limited opportunities, but you choose a specific ornament, you can replace the knitting needles. If you are a professional in this case, then you will be able to cope with more difficult work. For example, you can knit socks with a hook, mittens and other products.

First, think about which yarn and pattern to choose. Your work will be successful if the threads are not very thick. The ideal version of the yarn is 400 m per 100 g. Of these threads, you may well get a solid, dense and openwork product.

A fairly successful combination - threads in which natural fibers will be present to about 80%. If the percentage is below 40%, then from such yarn you get an easy option that you can wear in the warm season. If 90% of natural fibers are present in the yarn, then in the end you will receive a warm product. But due to regular friction on such clothing, rods will occur under the mice, below the product, on the sides.

It is important to choose a beautiful pattern

Depending on the selected model, you can use the following ornaments:

Continuous
Conditionally continuous
Openwork
An ornament that consists of several patterns at the same time

Very often, simple patterns are taken as a dense pattern of needlewoman. For example, columns without crochet. During the manufacture of the canvas using precisely such techniques, horizontal stripes are obtained.

A conditionally continuous ornament is a pattern in which there is a small number of openwork holes. You can apply such a pattern if you want to tie a model from thin warm threads. The openwork ornament is used for the basis of a decorative sweater or as an element that is combined with dense patterns. The last pattern is very often used for the manufacture of female sweaters.

Women's sweater two -color: description, photo

For the manufacture of this model, you will need the following materials:

Red threads - 2 skeins
White threads - 1 skein
Hook No. 2
Hook number 3

The process of making the back:

Tie a chain with air ps 38 cm long.
Stitch the RAM canvas so that its height is 39 cm.
Start forming a sleeve. Remove 2 times from one edge of the product 2 SN, and from the other edge 2 CN. Then in each edge 3 times 1 CN.

The process of manufacturing the program:

Knit an identical back in front of the product, but in the ornament you need to alternate: convex SN and concave CH.
The rapport pattern, which is located horizontally: convex SN, 5 SN, convex SN* - knit the required number of times.
Next, knit the next P: Brought -up CH, 5 SN, concave CH*. On the front side vertically, you will get a segment consisting of convex C and equal 5 p.

During the throat, first knit the right side of the product, then knit the left side, connecting both canvases with a thread.

Sleeve manufacturing process:

Take red threads. Type with the help of knitting a chain so that its length is 18 cm. Knit a canvas about 2 cm 5 mm wide. Next, knit crocheted.
1 p, knit SN into each P, which is formed after the needle is removed.
2 p, knit CN using hook No. 3. Skip 1 Nizhny S.
Starting with 3 p and ending 9 r, knit P without passes.
12 r - you should form a strip consisting of 44 Cn. Conditionally divide this strip into 3 parts. Each should have 16 CH of red yarn and 12 CH of beige yarn.
In the next pray -colored P, add 2 CH on both sides with a red thread.
Then knit with an identical color of 9 r, proceed to alternating threads.
When you knit a 39 cm long canvas, begin to reduce the number from 2 sides: reduce 2 CN, and reduce 1 CN 3 times.
When finish knit, start the recess of the shoulder with SBN.

The process of manufacturing cuffs:

During the manufacture of the cuff, use 2 hooks. The work is identical to the start of the sleeve, only in the mirror reflection

End of work:

Take all the parts of the product, sew them, taking into account the color of the thread each time.

Women's sweater “Glossy effect”: diagram, description, photo

For the manufacture of this product, take:

Brown yarn - 600 g
Hook No. 6
Hook No. 8
Hook No. 10

The manufacturing process of the central part:

Knit in the transverse direction.
Take hook No. 6, knit Figure No. 1. Raise 21 p on the one hand, knit 79 cm with an ornament, which is indicated in Scheme No. 2, finish knit.
Sew the edge to the side of the motive that is free.
Close the part to make a ring.

The process of manufacturing the front coquet:

Place the pattern of the central canvas in the center.
Raise 49 P along the upper edge, while grab 13 cm, on both sides of the pattern. Stitch the pattern according to the scheme No. 2.
When knit 13 cm, close the central 17 p cut of the throat: on one side of these P, each P is 2 times 2P, and on the other hand too.
When knit 22 cm, finish the work.

The process of making the back coquet:

Return from the front coquet from 2 sides of 4 cm - these will be armhole.
Raise 49 P to the remaining 45 cm of the canvas, knit an ornament indicated in Scheme No. 2.
When you knit a canvas 22 cm high, you will get 12 p of each shoulder, as well as 25 n throat.
Finish the work.

The process of manufacturing the lower part:

Take the central part.
On its lower edge, using hook No. 6, raise 108 p, knit circular ornament No. 3.
When knit 11 cm, take hook No. 8. Knit 11 cm.
Take hook No. 10. Having knitted 34 cm of the entire canvas, finish the work.

Sleeve manufacturing process:

Take hook number 6.
Dial a chain consisting of 27 VP.
Stitch the pattern indicated in the scheme No. 2.
Add from 2 sides in each 3 r 11 times 1 p. As a result, you should get a product 48 cm high.
Finish the work.

Assembly process:

Process all the details of the product.
Perform all the seams, sew the sleeves.
Take hook number 6. With it, tie the neck, bottom of the sweater, sleeves.

Women's sweater crocheting sports style: diagram, description, photo

To tie this sports sweater, take:

Gray acrylic threads - 500 g
Yellow acrylic threads - 15 g
Red acrylic threads - 15 g
Buttons - 3 pcs.
Long hook No. 4
Knitting needles No. 4

The process of making the back:

Take the knitting needles. Dial 97 p, tie an elastic band 3 cm wide.
Continue to crochet using Tunisian knitting and a single thread.
Stitch the LP, as in the figure. Consider the fact that in this case the working thread should be located on the left, so that you can knit the reverse R and evenly add 9 p.
When you knit a canvas 34 cm long, come as follows: close from 2 sides in each p at 4 p, then close 3 p, 2 POUSE 2 POOKS 2 times, reduce 3 times 1 P, retreating from the start of work 2 P - this is how you got it armhole.
Having knitted 14 cm from the place where the armhole begins, divide the P for the cut.
Tie about 6 cm, close the cut of the throat of 20 p and reduce 2 times 2 p. At the same time, retreat 2 p from the edge of the work.
When the total height of the product is 56 cm. Close the work.

The process of manufacturing the program:

Knit in front of you knitting your back.
When knitting the elastic band, distribute the colors of the yarn like this: 21 p, knit with gray yarn, 4 p red, 4 p is gray, 4 p yellow, continue to knit with a gray thread.
The height of the yellow strip should be 31 cm, the height is red flat - 40 cm.
When you knit a canvas 48 cm high, close 32 p, 2 sides of these Ps in each R. In this case, retreat 2 p from the edge of the canvas, retreat 6 times 1 p.
When you get a total height of 56 cm, finish knit.

The process of manufacturing the right sleeve:

Take the knitting needles. Dial 53 p, knit an elastic band 4 cm high.
Next, knit with the Tunisian knitting, while performing the LP.
Add at the same time evenly in every 1 p 3 p.
Then, from 2 sides, add in all 8 p to 1 p. Only 12 times.
When knit 40 cm, close from 2 sides of 4 p, reduce 28 times according to P, while retreat 2 p from the edge.
Having received a product 54 cm high, finish the work.

The process of manufacturing the left sleeve:

Stitch the sleeve like the right.
When knit 30 cm, start knitting the strips: knit 5 p with a yellow thread, knit 5 r with a gray thread, knit 5 r with a red thread. Continue knitting gray thread.

Assembly process:

Stick each part to the pattern.
Moisten the details, wait for them to dry.
Perform the seams on the shoulders and on the sides, sew the sleeves.
School on the edge of the neck using the 96 ps using the gray threads.
Knit 7 p elastic, close the P according to the ornament.
On one edge of the cut, make 3 loops, on the other - buttons.

Women's sweater with crochet: scheme, description, photo

The next sweater will help you make the following materials:

Acrylic threads - 850 g
Hook under the number 3.5
Knitting needles at number 4

The process of making the back:

Take the knitting needles, dial 94 p.
Stitch 10 cm gum.
Close all P according to the ornament.
On the edge of the elastic band with a hook, raise 87 p, knit an ornament according to the scheme.
Having knitted a canvas 51 cm high, close the work.

The process of manufacturing the program:

Knit in front of the back.
When you knit 47 cm, close in the center 15 p, close the 2 times from these ss 1 time 6 p, then close 6 p.
Having knitted 51 cm of total height, close the work.

Sleeve manufacturing process:

Take the knitting needles.
Dial 49 p, knit 12 cm gum.
Close all P according to the ornament.
Raise 52 p from the edge of the elastic band, knit an ornament from the circuit.
Make an addition from 2 sides: in 4 r, close 8 times 1 P.
When you get a canvas 55 cm high, finish the work.

The process of making a collar:

Take the knitting needles.
Dial 139 p, knit with an elastic band.
When you get a canvas 23 cm, close the work.

Assembly process:

Fill the details on the pattern.
Moisten the details, wait for them to dry a little.
Collect all the details, sew them.
In the end, sew the collar.

Women's sweater crocheted from hexagons: diagram, description, photo

The size of this product is 36/38. To fulfill it, purchase the following materials in advance:

Merinosome threads - 650 g
Hook No. 4

The process of manufacturing a hexagonal motive:

Start knitting the ring. Stitch as indicated in the diagram using circular r.
Each circular R begin to knit with the VP, that is, with lifting, finish 1 CH or 1 connecting C, introducing it into the last VP of rise.
Fold 1 ring made of yarn, tie 1 r into the ring.
Close the ring with a connecting C, then pull the thread to the size that you need.
From 1 circular P and 4 circular P, perform 1 time.
When you begin to knit 2 motive, in the last R circle in the designated places, do the connection with 1 connecting C.

Production of a common product:

In total, tie 74 motives.
When tie 1 motive, attach the next motive to it, knit it and so on.
On the pattern, only 1 \\ 2 part of the front and back with 1 \\ 2 sleeves are presented. Consider this.

Women's sweater Crochet "captivity": diagram, description, photo

So that you get a full -fledged product, take it for work:

Bright yarn - 800 g
Black yarn - 20 g
Hook No. 6

The manufacturing process of all parts:

Start knitting in front of the sweater. Take light threads, type a chain consisting of 71 VP. Knit as indicated in Scheme No. 1.
When you knit 40 cm, dial additional for each sleeve from 2 sides in each P: 1 time 22 P.2 2 times 22 P, then knit 21 P. As a result, you will get 201 P.
Having knitted the canvas 8 cm high, from the place where the sleeves begin, close for the throat 13 p, which are in the center.
From the 2 sides of these n, knit in each P: knit 2 times 2 times, then knit 2 Ps 2 P, knit P separately.
When knit 11 cm from the neck, combine P. dial a chain of 33 VP.
Stitch the canvas 16 cm high.
Perform from 2 sides in each P as follows: close 21 p, then close 1 time 22 p, and 1 time 22 p. You should get 71 P.
Stitch the canvas 40 cm high.
Finish the work.

Assembly process:

Each detail is pinned to the pattern.
Moisten the details, wait for them to dry.
Make the seams on the sides, sew the sleeves.
Tie the neck with a light thread as indicated in the diagram.
When knit a collar 14 cm high, close the work.
Take black threads. Tie 3 double strips from them about 1 m 20 cm long.
Pass 1 strip in the neckline. 2 Pass the remaining strips in the lower edge of the sweater.

Below, we will introduce you to knitting a female sweater and a jumper with a hook in photo instructions.