Tips for winter, summer, carp fishing from experienced fishermen: TOP-25 tips

To get a good catch, use our fishing advice.

Many fishermen dynasties traditionally convey from one generation to another their own tricks, tips, secrets that have been developed by experience for several years. Thus, a certain piggy bank of useful recommendations for fishermen took place.

You can study some fragments if you closely get acquainted with the material below. Here you will find everything: how to choose tackle, how to use them, what methods of fish catch exist, and so on.

Tips for winter, summer, carp fishing

Tip 1: Corn bait for fish

Corn is one of the best bait for catching carps. So say many professional fishermen. You can buy ordinary canned sugar corn, and then lower it into the oil of cold pressing. You will need 250 ml of oil for several fishing.

Tip 2: Preservation of live bait

A practical, inexpensive drum where you can store live bait, you can do it yourself. Just stock up on the following materials:

A drum from a broken washing machine.
A net made of galvanized wire.
Hinges.
Valve.

Production process:

Pass the rope through 3 holes.
In the inside, tie the nodes.

Traces of rust will never arise on the drum. Therefore, you can temporarily store your own catch in it. In addition, fresh water will flow through the holes that are in the drum.

Tip 3: Elastic band for fishing

A plastic thread made of rubber is one of the best improvised devices. Thanks to her, keep stopping nodes tightly. In addition, such an elastic band cannot damage the fishing line, a binding loop intended for weights is obtained from it.

Pulling and immediately letting go of the fishing line, you will be free from almost any hook. True in some situations, it is necessary to cut off the sinker.

Tip 4: Tubus where you can store floats

So as not to scratch the covered large floats, initially placed in a tennis sock. Then place the floats in the tube, so they will not be damaged during transportation.

Council 5: Create a stop node

In order for the stopping nodes made from the fishing line are not unleashed, they must be additionally fixed. When tie the nodes, melt their protruding ends using a lighter. You should get small hard balls at the place of melting. They will hold firmly. Never fix the nodes using rapidly dry glue. Since it can ruin the fishing line.

Tip 6: Wolf from tungsten

During the fishing of the vents, roach is often caught. You can catch this fish in a pond by grabbing a light muzzle or float tackle.

Of course, sometimes roach can confuse a strong leash, after which it becomes a tight spiral. If this happened to you, do not worry. Since you can free the float right during fishing.

Make it like this:

Take the hook. You will have to attach it to the button -shaped jacket loop or to the “dog” of lightning.
Pull a little over the leash so that it straightens.
Using a lighter, heat the float in the place where the bend is located. Make sure that it does not overheat. Also do not stretch it too much.

Having done this procedure, your float will become even, but its strength will not be lost.

Tip 7: bait for pike fishing

A place where no one was fishing with a catchy bait, feed about 14 days for about 14 days.

Take 2 herring.
Throw them away for bait.

Such a procedure should bring to you great benefits. If you fish in a standing pond, then change the bait with an interval of 2 hours. If in the river - 1 hour.

Throw the fish only ice cream so that the hook can stay when flying and getting into the water. Even if there is a severe frost outside, a slave, having penetrated into the water, quickly thaws and will make an attractive smell.

A fish that hangs upside down in the water will never cause suspicion in the pike. If you begin to throw the bait without using other mounting at the tail, then the hook will break out of her body. You can avoid this. Just skip the leash using the lure needle through the tail of the dumping fish.

Tip 8: Fishing with a float fishing rod

If you have fishing in a standing pond, then you will have to fulfill the following rules:

Make sure that the bait does not move at the bottom.
Be sure to drown the fishing line.
Always choose the right float correctly.
If you notice that the fishing line has glued to the surface, set the pile of lead slightly above the float.
Try to immerse the float deeper. Also choose the float that is longer. So you can control fishing.

Tip 9: How to catch perch using wobblers?

The vagaries of the weather in winter often make the fish go to shallow places. There, the depth, as a rule, is a maximum of 0.7 m. It will be difficult for you to catch a perch in a similar area. In this case, we advise you to catch the perch using a wobbler with a maximum of 6.5 cm long.

To hang the wobbler horizontally, you will need a loop. You can make it from a hook equipped with a ring of the required size. Remove part of the hook. The length of the resulting segment from the ring should be a maximum of 8 mm.

Heat the wire with a lighter. Pass it into the wobbler from the side where the ring is located. To determine the location of the ring, hang a wobbler on a loop made from the fishing line. Keep in mind that the wobbler tail should be lower than the horizontal.

Remove the usual triple hooks. Instead, on the wobbler, install the “devil” of the desired mass. A similar wobbler slowly descends to the bottom, often it has the ability to shift from one side to another. And already with a strong jerk, the wobbler leaves a little from the vertical line.

Tip 10: Production of a triple swivel

You can use this swivel during trout fishing. There is a mobile chain that will not allow the fish to free from the hook. If the loop that is located on the upper skewer, you will insert into the clockwork ring, then there will be a carbine on the lower ring. As a result, you quickly replace tees.

Tip 11: Holder for hook

Many fishermen stick hooks into the handle of fishing rods. After a few years of such practice, the pen will resemble cheese with holes. You can do differently. Tie a fishing line with a small groove ring to a lump plug. You can cling to it hooks. To supplement, grab more Velcro, so that you do not get hurt about the tip.

Tip 12: Box for fisherman with his own hands

Are you scattered in a fishing box? Do you notice that they are confused between each other, and during unraveling the tees often get hurt? In order to avoid this, make a special box.

Buy a regular box designed for tools in the store.
From polystyrene foam 2 cm thick, cut the plate so that it is present in it, shape and size, like a spinning.
At the top of the plate, make the slots. Insert hooks into them.

After that, the tees will not cling and scratch your hands. This advice is considered, of course, a little outdated. Today in each specialized store you can buy a box for fisherman for various needs.

Tip 13: Stop to float

During fishing on the river, the bite, which are located along the stern path, are sometimes carried out at a distance of about 1 m from the fisherman itself. If you decide to apply a sliding float that will initially run from the sinker to the upper stop, you risk not noticing the bite.

Take advantage of a simple solution: fix the float between the 2 stoppers made of rubber, then move the pellets simultaneously. A small sinker will immediately fall to the bottom and the float from the very beginning, passing, will give you a sign about the beginning of the bite.

Tip 14: How to make a fishing rod "balalaika" for winter fishing?

Such a fishing rod has only one single disadvantage that sometimes crosses out all the advantages. Sometimes during winding or tightening the fishing line in a coil closed with a coil, the turns begin to fly, penetrating into the holes that are between the bobbin and the common body. As a result, the fishing line is wound on the axis.

In such situations, you begin to unscrew the nut, remove the bobbin, and it is difficult to do this in the cold. You can avoid such a situation. Insert a piece of Cambrick into a hole in the hole in the body of the fishing rod (its diameter should be no more than 2 mm).

Thus, so that the inner tip of the Cambrick was walking along the tangent relative to the diameter of the winding, but not further than the axis. Therefore, choose the length of Cambrick carefully.

The tube received from Cambrics will give you the opportunity to pull the bobbin, put in place (if necessary). Thanks to this method, fishing line turns will no longer be dropped.

Tip 15: How to catch a barbel?

Catching. Want to experience the most unforgettable emotions while catching a barbel? Carefully study the place where fishing will take place. Snakers have a streamlined shape, they have large fins. This allows Pisces to adapt well in such places.
Choose tackle. On large rivers, barbels in the summer are where there is a current. On small rivers, barbels are in places of dams, in channel cavities. To throw the bait, it must have a decent weight. Thanks to a large in weight, a sinker or a special feeder, you can keep the nozzle in the required area. If the bottom is even, use a light sinker. If you catch the barbel on the course, then put the necessary weighting agent.

Choose bait. It is difficult to attract barbecue using abundant bait. Yes, you will not need to do this if you know where the fish is. A properly selected dose of bait will only help you enter the barbels in taste.
Choose a nozzle. Often, the nozzle itself has an attractive appearance, especially if it has a fragrant smell. For nozzle, use rainworms, canned meat, cheese. At night, catch the barbells in small areas. In the afternoon, in such places you will not catch a barbel. Only in complete darkness does the fish feel comfortable. This means that during the day it is better not to go fishing for this type of fish.

Tip 16: How to catch fish with a spinning rod?

If you like to catch fish with spinning, then you will have to comply with the following rules:

In order for the fishing to be successful, choose hooks perfectly sharp. Otherwise, they will be constantly empty.
If the hook is hooked on the wood, a shell or stone, after pulling it out, be sure to sharpen it. Sometimes a fish breaks down due to a stupid hook.
You must know where the bait is located. The depth of the wiring, if you have a fluctuating or rotating spinner, adjust them with weight, as well as the winding speed.

Tip 17: How to catch a large catfish?

Catching a big catfish - every fisherman dreams of this. Professionals use a special capture for fishing. Want to repeat it? Perform the following manipulations:

Wait for the fish to open the jaw.
Grab the catfish with 2 hands.

But before fishing, put on strong gloves. So you will avoid the risk of injuries.

Tip 18: We make bait for carp

For fishing, you will have to use a shell-shell. But you cannot plant meat quickly. During severe casting, the bait often flies and a small fish begins to rub it.

The output is simple:

Pull carefully the shell meat into a plastic grid so that it has large cells.
Dig the bag using an elastic band or thread.
The hook of the required size render at the beginning of the tie.

In the end, you will get a “shaggy” equipment that will not be available to a small fish, and therefore will hang tight on the hook.

Tip 19: How to make a neon spin for catching trout?

Bright “therapy” for trout made for brilliants makes the fish vulnerable even if the water is too muddy. In such water, ordinary silver or bronze spinning, you will not get excellent results. In muddy water, trout can be attracted only by bright shades.

Buy bright paint in a specialized fishing store.
Apply the paint to the spinner, wait for it to dry.

The advantage of such a technique is if the paint is no longer needed, you can scrap it with a sharp knife.

Tip 20: Where to store maggots in the summer?

When there is strong heat outside, it is better to store maggots in a linen with a small bag. It will not make a strong smell, plus its shelf life will last. If you put maggots in the summer in a plastic dish, then after a couple of days you will feel that they will begin to smell of ammonia.

During the heat, maggots sweat a lot. As a result, a poor smell occurs. So that they attract fish, after their acquisition, put them in a ventilated bag. Wait a while to disappear the unpleasant odor.

In addition, if you wet the bag where the maggots are located, save them in a chilled state even in strong heat. Thanks to the evaporation of moisture, they will cool and will not die.

Tip 21: How to catch Yaza?

You can catch this fish in any season. The ide approximately in the middle of spring begins to go astray, and then moves to small places of rivers, lakes. It is at this time that you have the most large fish.

We catch in the spring. If you decide to catch Yaia at this time of the year, then look for fish at the bottom. Try to feed the fish economically, never make noise. The ide is the spring fish. You have every chance to catch her if you catch it at the bottom.
We catch in the summer. In the summer, fishing differs from fishing in the spring. At this time, the fish is at the top of the water, and therefore also eats at the surface. Yaz catches crumbs of bread, various insects.

It is desirable to catch the poison in small reservoirs. Here the fish is growing up, and therefore pleases the fishermen with their own large sizes.

Council 22: signaling device for bite

Want to catch zander? Then you can not do without a double mechanical signaling device - this is a bell located on the change of feeder. The bell is not a very sensitive signaling device, but with a similar vertex you will feel the slightest movement.

Before you hook, hand over a couple of meters of fishing line. If the fish begins to peck carefully, then thanks to a double alarm, the bite increases by almost 2 times. In addition, you will be less tired due to regular tracking at the top. Do you want the bell to stay in place after the cut? Fasten it on the interpretation of the feeder. Just take a simple tape, use it to attach the bell over the penultimate ring.

Tip 23: How to catch carp?

In order for fishing to bring good results, constantly monitor the reservoir. Therefore, you will have to climb the trees and other natural places of the review. Only from a high point you will see where the flock of carps stopped.
Carps love to rummage along the bottom of the reservoir. So fish are trying to find food. It can feed them in this way.
When you find the habitat of carps, prepare this site. This is the only way the fish will be able to stay for a while.

There are several days later you will learn that a small fish is also found in the selected place, then you can lure large carp with lures, for example, potatoes.
Look for new places for fishing more often. So you can at any time change the fishing area of \u200b\u200bcarps.
Know, carps love to hide under water lily.

Tip 24: How to feed the carp?

Professional fishermen argue that bait always plays an important role.

If you feed the carp in advance, you can allocate places for yourself at once. So you will increase your own chances of catching large fish.
Carps love swollen, slightly boiled corn.
Use cereals during fishing. It may even seem to you that the fish is crazy when it will try to catch small grains. Scatter a mixture of grains on the surface, wait for the fish to bite.
On large reservoirs, lay marks from food. They can bring carps to the completion area.
On those reservoirs that are poorly familiar to you, catch the fish a couple of days after feeding.
Carp loves pellets. These small granules of Karpa eat with great pleasure, because for fish they are considered the best treat.
In the period of spring and autumn, feed the carps with chopped worms, bloodworms.

Tip 25: How to catch a bream?

Such fishing is considered a very pleasant activity. Especially when the caught specimens are large. But not everyone can outwit large fish. This requires a lot of patience, thorough preparation. Large individuals, the weight of which is more than 2 kg, is very shy. Therefore, you will not meet them in any pond.

As a rule, bream falls on hooks as additional surprises. You can ask experienced fishermen in advance whether such cases happened to them and where.

The best bait for the bream is maggot. However, if the fish does not peck on them, then use the dolls of maggots. Large individuals love to eat such dolls. Stir the doll carefully so that their juicy insides do not flow out.

Also, during fishing, a donke with a feeder will come in handy. In this case, choose a dense bait so that it does not immediately wash with water.