The floors creak: what to do and how to get rid of the problem?

If the floors began to creak in your house, you do not need to be upset. This problem is quite solved.

Content

The sound of creaking floorboards is probably known to everyone. Someone gets used to him and does not pay attention, for others this is a test that is not easy to withstand. In any case, this problem is solved, you only need to listen to several tips below.

Why are the floors creak?

The most popular floors designs are lamps laid on lags or plywood (chipboard).
Typically, the skin is nailed to the beam with ordinary nails, which are shaken over time. This leads to the deflection of the boards and, as a result, to their creak. Yes, and the lags are also able to shook, which only adds a creak.
Maybe the floors creak due to friction of the boards about each other - Here, a wooden wedges driven between them will help.
The creak can be caused low -quality drying of woodwhich leads to cracks in it during operation and cracks. In this case, individual elements can be rubbed against each other by making a creak.
Excessive the gaps between the lags or too thin boards bending too much For the floor, they can also cause a creak.

If the varnish layer of parquet is worn, the adhesive layer is destroyed and the connection of the elements becomes less durable, the creak is inevitable.
At lack of compensation clearance of the floors from chipboard, the shield parquet can deform and creak.
Boards can dry out and reduce the degree of fixation by their nails, screws or self -tapping screws. Then a creak appears in these places.
Deforming the gender itself as a result of wear, swelling, etc.

What to do so that the floor does not creak?

This can be done without spending significant funds. Easier and cheaper to use self -tapping screws, having duplicated the fastenings with old nails, if the floors creak. If everything is in order with the lags, a similar method must solve the creaking problem.
A more costly method, but at the same time more reliable and durable - replace the floors. You can choose the styling of a new floor on the lags or replacing the floor boards with a dry, half -dry or wet screed.
Keep in mind that with a new screed, you will increase the height of the floor and you will have to replace the door. The pluses include the fact that now you can put on a screed a coating of porcelain tile, as well as add the heating function.
To preserve the previous level, you can compensate for the missing thickness with expanded clay or extruded polystyrene foam. Along the way, you will increase the level of noise and thermal insulation. And, of course, it is necessary to take into account the permissible load values.
Scroll the floor with self -tapping screws Directly enough: determine the necessary length of the screw, drilling a hole and sticking a wire into it, and then, walking along the lags, screw the screws.

You can also focus in the length of the screws not on the lags, but on the concrete, just do not forget to dull the tips of the screws so that their tip does not destroy the concrete screed.

The floors creak: what to do without opening?

If the floors creak, try to use any of the following methods:

Try to use the usual stearin or wax candle, smearing her seams at the junction of the neighboring floorboards.
Check all the boards and find loose adjacent. In it you need to drill a hole and, using the syringe, fill it with a liquid cement mixture. Wait until the solution is absorbed and repeat the procedure.
Drill small holes at a distance of half a meter from each other and secure them with glue, grinding into the gender of the hat that will show over it.
Enter installation foam between parquet boards. Having increased and frozen, it will make the floor more rigid, which will interfere with the creak.
Use a special sealant intended for wood, filling it into the joints of the floorboards.
Fighting together self -tapping screws at a distance of about 15 cm from each other - this will eliminate the creak if it is caused by the hars of rubbing on the lag.
A more time -consuming way - pass the plywood along the perimeter of the premises (The thickness should be over 12 mm). Fix with self -tapping screws.
Determine which of the boards creak, and replace them, again, with the help of self -tapping screws or simple nails.

Do not forget that after eliminating the skip, any of the described methods of the floor must be finally processed. If the cracks remain, smear them with mastic, and then open with varnish.

Paul chipboard creaks: what to do?

If there are no gaps between the wall and near the lying elements, you can use the disk saw to make gaps wider. The main thing is to make sure that you will not affect nails or self -tapping screws.
If the creak is caused by insufficient plates thickness, it is worth laying another layer. This method is acceptable with a step of a lag up to 60 cm.
The floors creak due to the deflection of the slabs? We will have to dismantle the coating, and then cut a square with sides half a meter in a DSP-plate with a disc. Brushes, restore chipboard and fix the bars with bars using self -tapping screws. Swat the seams and restore the coating.

The wooden floor creaks: what to do?

If the creak occurs as a result drying the boards, try to fall asleep gaps with talcum or graphite powder. You can also drive the wedges there, after I put them.

The house is too damp and for this reason the floors creak? Dismate them and cover the lags with roofing material, leading it to the walls. Do not rotten floorboards and treat and treat with an antiseptic.

If materials of beams and boards Different - try to lay them with a damping layer.
When the creak of only one floorboards, drill where the creak, hole comes and squeeze the mounting foam into it.

Paul Laminate creaks

This can happen if the base for the laminate is uneven. Therefore, before laying the laminate, it is necessary to make sure that there are no pits or tubercles at the base. If the floor still creaks, in this place you need to remove the panels and eliminate irregularities with a cement mortar.
Check the thickness of the substrate - It should not exceed 3 cm. Otherwise, it will have to be replaced by a less thick one.
If between the wall and the laminate There is no gap (about 7 mm), noise may occur and start grish the floors. Its reason is that the laminate will rest against the baseboard or wall. It is necessary, having removed the baseboard, cut the edges of the laminate, creating a free space between the wall and the laminate, and then restore the skirting board.
Moisture differences in the room - another reason. Here the weather itself will come to the rescue, because in this case the appearance of the creak depends on the change of seasons, weather conditions, raw or arid atmosphere, etc.
Surfacing When laying a laminate, a crunch can cause. The fall of dust and sand to the joints of the panels, and even in the screed almost always leads to such consequences. Therefore, before laying the laminate, the surface must be thoroughly cleaned. Otherwise, you will have to disassemble the creaking zones, re -fill with cement, level, dry, primer and clean it.
Low-quality laminate due to castles of different sizes Also creaks. Only a complete change in the coating will help here. Therefore, do not save on quality.

Low -quality laminate needs to be replaced

A creak may appear due to pressure In the place where Connection of laminate locks. If you have acquired a laminate from a guaranteed manufacturer, you should wait a couple of months - perhaps the grinding of the base just occurs to the surface. In addition, the presence of the necessary gaps in the walls matters.

Paulus creaks - parquet

Grish the floors They can be due to periodic moisture, which is why the bloating of the planks and their lag from the base occurs. The cause may be a mechanical effect that led to a crack, breakdown of a crest or groove, non -compliance with size or the absence of a clearance between the wall and the coating or laying directly on the screed.
If only a few planks creaksIt is enough to pour under each PVA or wax glue, having previously melted it. This can be done with a syringe through drilled holes. If the problem is with a significant part of the planks, you need to change, removed, cleaning the old mastic and laying a new bar on a layer of fresh mastic.

If a wooden coating is under parquet, you should fix the bar with nails.
The completely creaking floor will save only a complete re -laying that it is better to entrust specialists.

The floor creaks under linoleum: what to do?

Linoleum itself is not subject to violins. The problem lies in friction and pressure on it.
If you move heavy furniture every week, rearranging it from place to place, or go around the apartment in boots, do not be surprised at the emerging slicking the floor.
But if similar sounds become constant - look for the reason not in linoleum itself, but at the base on which it is laid.

New floors creak

If new floors creak, In this case, you should re -read all the above tips and depending on the material from which the floor is made, and the factors leading to the creak, try to find the reason.
Perhaps the whole point is that you chose the material and masters of "cheaper" when laying? Then you will have to pay twice and spend money on quality material.

Remember that when laying it, you need to take care of fulfilling all requirements both in relation to the tree and the metal connecting it, because these are two different materials, each with its own load, permissible temperature and humidity. No less important preparation of the base - The correctness of its styling largely guarantees the absence of a creak in the future.